LM185-2.5,LM285-2.5,LM385-2.5
LM185-2.5/LM285-2.5/LM385-2.5 Micropower Voltage Reference Diode
Literature Number: SNVS743C
January 30, 2008
LM185-2.5/LM285-2.5/LM385-2.5
Micropower Voltage Reference Diode
General Description
The LM185-2.5/LM285-2.5/LM385-2.5 are micropower 2-ter-
minal band-gap voltage regulator diodes. Operating over a 20
μA to 20 mA current range, they feature exceptionally low dy-
namic impedance and good temperature stability. On-chip
trimming is used to provide tight voltage tolerance. Since the
LM-185-2.5 band-gap reference uses only transistors and re-
sistors, low noise and good long term stability result.
Careful design of the LM185-2.5 has made the device excep-
tionally tolerant of capacitive loading, making it easy to use in
almost any reference application. The wide dynamic operat-
ing range allows its use with widely varying supplies with
excellent regulation.
The extremely low power drain of the LM185-2.5 makes it
useful for micropower circuitry. This voltage reference can be
used to make portable meters, regulators or general purpose
analog circuitry with battery life approaching shelf life. Fur-
ther, the wide operating current allows it to replace older
references with a tighter tolerance part. For applications re-
quiring 1.2V see LM185-1.2.
The LM185-2.5 is rated for operation over a −55°C to 125°C
temperature range while the LM285-2.5 is rated −40°C to 85°
C and the LM385-2.5 0°C to 70°C. The LM185-2.5/LM285-2.5
are available in a hermetic TO-46 package and the
LM285-2.5/LM385-2.5 are also available in a low-cost TO-92
molded package, as well as S.O. and SOT-23. The
LM185-2.5 is also available in a hermetic leadless chip carrier
package.
Features
±20 mV (±0.8%) max. initial tolerance (A grade)
Operating current of 20 μA to 20 mA
0.6Ω dynamic impedance (A grade)
Low temperature coefficient
Low voltage reference—2.5V
1.2V device and adjustable device also available—
LM185-1.2 series and LM185 series, respectively
Connection Diagrams
TO-92
Plastic Package
551908
Bottom View
Order Number LM285Z-2.5,
LM285BXZ-2.5, LM285BYZ-2.5
LM385Z-2.5, LM385AXZ-2.5
LM385AYZ-2.5, LM385BZ-2.5,
LM385BXZ-2.5 or LM385BYZ-2.5
See NS Package Number Z03A
SO Package
551911
Order Number LM285M-2.5,
LM285BXM-2.5, LM285BYM-2.5
LM385M-2.5, LM385BM-2.5
LM385BXM-2.5 or LM385BYM-2.5
See NS Package Number M08A
SOT-23
551929
* Pin 3 is attached to the Die Attach Pad (DAP) and should be connected to Pin 2 or left floating.
Order Number LM385M3-2.5
See NS Package Number MA03B
© 2008 National Semiconductor Corporation 5519 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5 Micropower Voltage Reference Diode
LCC
Leadless Chip Carrier
551914
Order Number LM185E-2.5/883
See NS Package Number E20A
TO-46
Metal Can Package
551913
Bottom View
Order Number LM185H-2.5,
LM185H-2.5/883, LM185BXH-2.5,
LM185BXH-2.5/883, LM185BYH-2.5,
LM185BYH2.5/883, LM285H-2.5,
or LM285BYH-2.5
See NS Package Number H02A
www.national.com 2
LM185-2.5/LM285-2.5/LM385-2.5
Absolute Maximum Ratings (Notes 1, 2)
If Military/Aerospace specified devices are required,
please contact the National Semiconductor Sales Office/
Distributors for availability and specifications.
Reverse Current 30 mA
Forward Current 10 mA
Operating Temperature
Range (Note 3)
LM185-2.5 −55°C to + 125°C
LM285-2.5 −40°C to + 85°C
LM385-2.5 0°C to 70°C
ESD Susceptibility (Note 9) 2kV
Storage Temperature −55°C to + 150°C
Soldering Information
TO-92 Package (10 sec.) 260°C
TO-46 Package (10 sec.) 300°C
SO and SOT Package
Vapor Phase (60 sec.) 215°C
Infrared (15 sec.) 220°C
See AN-450 “Surface Mounting Methods and Their Effect on
Product Reliability” for other methods of soldering surface
mount devices.
Electrical Characteristics
(Note 4)
Parameter Conditions Typ
LM385A-2.5
Units
(Limits)
LM385AX-2.5
LM385AY-2.5
Tested Design
Limit Limit
(Note 5) (Note 6)
Reverse Breakdown IR = 100 μA2.500 2.480 V(Min)
Voltage 2.520 V(Max)
2.500 2.470 V(Min)
2.530 V(Max)
Minimum Operating 12 18 20 μA
Current (Max)
Reverse Breakdown IMIN IR 1mA 1 1.5 mV
Voltage Change with (Max)
Current 1 mA IR 20 mA 10 20 mV
(Max)
Reverse Dynamic IR = 100 μA, 0.2 0.6 Ω
Impedance f = 20 Hz 1.5
Wideband Noise (rms) IR = 100 μA120 μV
10 Hz f 10 kHz
Long Term Stability IR = 100 μA,
T = 1000 Hr, 20 ppm
TA = 25°C ±0.1°C
Average Temperature IMIN IR 20 mA
Coefficient (Note 7) X Suffix 30 ppm/°C
Y Suffix 50 (Max)
All Others 150
3 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
Electrical Characteristics
LM185-2.5
LM185BX-2.5 LM385B-2.5
LM185BY-2.5 LM385BX-2.5 LM385-2.5 Units
LM285-2.5 LM385BY-2.5 (Limit)
Parameter Conditions Typ LM285BX-2.5
LM285BY-2.5
Tested Design Tested Design Tested Design
Limit Limit Limit Limit Limit Limit
(Notes 5, 8) (Note 6) (Note 5) (Note 6) (Note 5) (Note 6)
Reverse
Breakdown
TA = 25°C, 2.5 2.462 2.462 2.425 V(Min)
Voltage 20 μA IR 20 mA 2.538 2.538 2.575 V(Max)
Minimum Operating
Current
13 20 30 20 30 20 30 μA
(Max)
LM385M3-2.5 15 20
Reverse
Breakdown Voltage
Change with
Current
20 μA IR 1 mA 1 1.5 2.0 2.5 2.0 2.5 mV
(Max)
1 mA IR 20 mA 10 20 20 25 20 25 mV
(Max)
Reverse Dynamic IR = 100 μA, 1 Ω
Impedance f = 20 Hz
Wideband Noise
(rms)
IR = 100 μA, 120 μV
10 Hz f 10 kHz
Long Term Stability IR = 100 μA,
T = 1000 Hr, 20 ppm
TA = 25°C ±0.1°C
Average
Temperature
IR = 100 μA
Coefficient (Note 7) X Suffix 30 30 ppm/°C
Y Suffix 50 50 ppm/°C
All Others 150 150 150 ppm/°C
(Max)
Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is
intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics.
The guaranteed specifications apply only for the test conditions listed.
Note 2: Refer to RETS185H-2.5 for military specifications.
Note 3: For elevated temperature operation, TJ MAX is:
LM185 150°C
LM285 125°C
LM385 100°C
Thermal Resistance TO-92 TO-46 SO-8 SOT-23
θja (Junction to Ambient) 180°C/W (0.4″ Leads) 440°C/W 165°C/W 283°C/W
170°C/W (0.125″ Leads)
θjc (Junction to Case) N/A 80°C/W N/A N/A
Note 4: Parameters identified with boldface type apply at temperature extremes. All other numbers apply at TA = TJ = 25°C.
Note 5: Guaranteed and 100% production tested.
Note 6: Guaranteed, but not 100% production tested. These limits are not used to calculate average outgoing quality levels.
Note 7: The average temperature coefficient is defined as the maximum deviation of reference voltage at all measured temperatures between the operating
TMAX and TMIN, divided by TMAX–TMIN. The measured temperatures are −55°C, −40°C, 0°C, 25°C, 70°C, 85°C, 125°C.
Note 8: A military RETS electrical specification available on request.
Note 9: The human body model is a 100 pF capacitor discharged through a 1.5 k resistor into each pin.
www.national.com 4
LM185-2.5/LM285-2.5/LM385-2.5
Typical Performance Characteristics
Reverse Characteristics
551915
Reverse Characteristics
551916
Forward Characteristics
551917
Temperature Drift
551918
Reverse Dynamic
Impedance
551919
Reverse Dynamic
Impedance
551920
5 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
Noise Voltage
551921
Filtered Output Noise
551922
Response Time
551923
Applications
Wide Input Range Reference
551912
Micropower Reference from 9V Battery
551902
LM385-2.5 Applications
Micropower 5V Reference
551909
Note 10: IQ ≃ 40 μA
www.national.com 6
LM185-2.5/LM285-2.5/LM385-2.5
Micropower 10V Reference
551910
Note 11: IQ ≃ 30 μA standby current
PRECISION 1 μA to 1 mA CURRENT SOURCES
551924
551925
7 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
METER THERMOMETERS
0°C–100°C Thermomemter
551926
Calibration
1. Short LM385-2.5, adjust R3 for IOUT=temp at 1μA/°K
Remove short, adjust R2 for correct reading in centigrade
0°F–50°F Thermomemter
551927
Calibration
1. Short LM385-2.5, adjust R3 for IOUT=temp at 1.8 μA/°K
Remove short, adjust R2 for correct reading in °F
www.national.com 8
LM185-2.5/LM285-2.5/LM385-2.5
Micropower Thermocouple Cold Junction Compensator
551906
Adjustment Procedure
1. Adjust TC ADJ pot until voltage across R1 equals Kelvin temperature multiplied by the thermocouple Seebeck coefficient.
2. Adjust zero ADJ pot until voltage across R2 equals the thermocouple Seebeck coefficient multiplied by 273.2.
Seebeck Voltage Voltage
Thermocouple Co- R1 R2 Across R1 Across R2
Type efficient (Ω) (Ω) @25°C (mV)
(μV/°C) (mV)
J 52.3 523 1.24k 15.60 14.32
T 42.8 432 1k 12.77 11.78
K 40.8 412 953Ω 12.17 11.17
S 6.4 63.4 150Ω 1.908 1.766
Typical supply current 50 μA
Improving Regulation of Adjstable Regulators
551907
9 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
Schematic Diagram
551901
www.national.com 10
LM185-2.5/LM285-2.5/LM385-2.5
Physical Dimensions inches (millimeters) unless otherwise noted
Order Number LM185E-2.5/883
NS Package Number E20A
TO-46 Metal Can Package (H)
Order Number LM185H-2.5, LM185H-2.5/883, LM185BXH-2.5, LM185BXH-2.5/883,
LM185BYH-2.5, LM185BYH-2.5/883, LM285H-2.5, or LM285BYH-2.5
NS Package Number H02A
11 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
SOT-23 Package (M3)
Order Number LM385M3-2.5
NS Package Number MA03B
www.national.com 12
LM185-2.5/LM285-2.5/LM385-2.5
Small Outline (SO-8) Package (M)
Order Number LM285M-2.5, LM285BXM-2.5, LM285BYM-2.5,
LM385M-2.5, LM385BM-2.5, LM385BXM-2.5 or LM385BYM-2.5
NS Package Number M08A
13 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
TO-92 Plastic Package (Z)
Order Number LM285Z-2.5, LM285BXZ-2.5, LM285BYZ-2.5,
LM385Z-2.5, LM385AXZ-2.5, LM385AYZ-2.5,
LM385BZ-2.5, LM385BXZ-2.5 or LM385BYZ-2.5
NS Package Number Z03A
www.national.com 14
LM185-2.5/LM285-2.5/LM385-2.5
Notes
15 www.national.com
LM185-2.5/LM285-2.5/LM385-2.5
Notes
LM185-2.5/LM285-2.5/LM385-2.5 Micropower Voltage Reference Diode
For more National Semiconductor product information and proven design tools, visit the following Web sites at:
Products Design Support
Amplifiers www.national.com/amplifiers WEBENCH www.national.com/webench
Audio www.national.com/audio Analog University www.national.com/AU
Clock Conditioners www.national.com/timing App Notes www.national.com/appnotes
Data Converters www.national.com/adc Distributors www.national.com/contacts
Displays www.national.com/displays Green Compliance www.national.com/quality/green
Ethernet www.national.com/ethernet Packaging www.national.com/packaging
Interface www.national.com/interface Quality and Reliability www.national.com/quality
LVDS www.national.com/lvds Reference Designs www.national.com/refdesigns
Power Management www.national.com/power Feedback www.national.com/feedback
Switching Regulators www.national.com/switchers
LDOs www.national.com/ldo
LED Lighting www.national.com/led
PowerWise www.national.com/powerwise
Serial Digital Interface (SDI) www.national.com/sdi
Temperature Sensors www.national.com/tempsensors
Wireless (PLL/VCO) www.national.com/wireless
THE CONTENTS OF THIS DOCUMENT ARE PROVIDED IN CONNECTION WITH NATIONAL SEMICONDUCTOR CORPORATION
(“NATIONAL”) PRODUCTS. NATIONAL MAKES NO REPRESENTATIONS OR WARRANTIES WITH RESPECT TO THE ACCURACY
OR COMPLETENESS OF THE CONTENTS OF THIS PUBLICATION AND RESERVES THE RIGHT TO MAKE CHANGES TO
SPECIFICATIONS AND PRODUCT DESCRIPTIONS AT ANY TIME WITHOUT NOTICE. NO LICENSE, WHETHER EXPRESS,
IMPLIED, ARISING BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS GRANTED BY THIS
DOCUMENT.
TESTING AND OTHER QUALITY CONTROLS ARE USED TO THE EXTENT NATIONAL DEEMS NECESSARY TO SUPPORT
NATIONAL’S PRODUCT WARRANTY. EXCEPT WHERE MANDATED BY GOVERNMENT REQUIREMENTS, TESTING OF ALL
PARAMETERS OF EACH PRODUCT IS NOT NECESSARILY PERFORMED. NATIONAL ASSUMES NO LIABILITY FOR
APPLICATIONS ASSISTANCE OR BUYER PRODUCT DESIGN. BUYERS ARE RESPONSIBLE FOR THEIR PRODUCTS AND
APPLICATIONS USING NATIONAL COMPONENTS. PRIOR TO USING OR DISTRIBUTING ANY PRODUCTS THAT INCLUDE
NATIONAL COMPONENTS, BUYERS SHOULD PROVIDE ADEQUATE DESIGN, TESTING AND OPERATING SAFEGUARDS.
EXCEPT AS PROVIDED IN NATIONAL’S TERMS AND CONDITIONS OF SALE FOR SUCH PRODUCTS, NATIONAL ASSUMES NO
LIABILITY WHATSOEVER, AND NATIONAL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY RELATING TO THE SALE
AND/OR USE OF NATIONAL PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR
PURPOSE, MERCHANTABILITY, OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY
RIGHT.
LIFE SUPPORT POLICY
NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR
SYSTEMS WITHOUT THE EXPRESS PRIOR WRITTEN APPROVAL OF THE CHIEF EXECUTIVE OFFICER AND GENERAL
COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein:
Life support devices or systems are devices which (a) are intended for surgical implant into the body, or (b) support or sustain life and
whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected
to result in a significant injury to the user. A critical component is any component in a life support device or system whose failure to perform
can be reasonably expected to cause the failure of the life support device or system or to affect its safety or effectiveness.
National Semiconductor and the National Semiconductor logo are registered trademarks of National Semiconductor Corporation. All other
brand or product names may be trademarks or registered trademarks of their respective holders.
Copyright© 2008 National Semiconductor Corporation
For the most current product information visit us at www.national.com
National Semiconductor
Americas Technical
Support Center
Email:
new.feedback@nsc.com
Tel: 1-800-272-9959
National Semiconductor Europe
Technical Support Center
Email: europe.support@nsc.com
German Tel: +49 (0) 180 5010 771
English Tel: +44 (0) 870 850 4288
National Semiconductor Asia
Pacific Technical Support Center
Email: ap.support@nsc.com
National Semiconductor Japan
Technical Support Center
Email: jpn.feedback@nsc.com
www.national.com
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements,
and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should
obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are
sold subject to TIs terms and conditions of sale supplied at the time of order acknowledgment.
TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TIs standard
warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where
mandated by government requirements, testing of all parameters of each product is not necessarily performed.
TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and
applications using TI components. To minimize the risks associated with customer products and applications, customers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right,
or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information
published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a
warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual
property of the third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied
by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive
business practice. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional
restrictions.
Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all
express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not
responsible or liable for any such statements.
TI products are not authorized for use in safety-critical applications (such as life support) where a failure of the TI product would reasonably
be expected to cause severe personal injury or death, unless officers of the parties have executed an agreement specifically governing
such use. Buyers represent that they have all necessary expertise in the safety and regulatory ramifications of their applications, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of TI products in such safety-critical applications, notwithstanding any applications-related information or support that may be
provided by TI. Further, Buyers must fully indemnify TI and its representatives against any damages arising out of the use of TI products in
such safety-critical applications.
TI products are neither designed nor intended for use in military/aerospace applications or environments unless the TI products are
specifically designated by TI as military-grade or "enhanced plastic."Only products designated by TI as military-grade meet military
specifications. Buyers acknowledge and agree that any such use of TI products which TI has not designated as military-grade is solely at
the Buyer's risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use.
TI products are neither designed nor intended for use in automotive applications or environments unless the specific TI products are
designated by TI as compliant with ISO/TS 16949 requirements. Buyers acknowledge and agree that, if they use any non-designated
products in automotive applications, TI will not be responsible for any failure to meet such requirements.
Following are URLs where you can obtain information on other Texas Instruments products and application solutions:
Products Applications
Audio www.ti.com/audio Communications and Telecom www.ti.com/communications
Amplifiers amplifier.ti.com Computers and Peripherals www.ti.com/computers
Data Converters dataconverter.ti.com Consumer Electronics www.ti.com/consumer-apps
DLP®Products www.dlp.com Energy and Lighting www.ti.com/energy
DSP dsp.ti.com Industrial www.ti.com/industrial
Clocks and Timers www.ti.com/clocks Medical www.ti.com/medical
Interface interface.ti.com Security www.ti.com/security
Logic logic.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Power Mgmt power.ti.com Transportation and Automotive www.ti.com/automotive
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Mobile Processors www.ti.com/omap
Wireless Connectivity www.ti.com/wirelessconnectivity
TI E2E Community Home Page e2e.ti.com
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright ©2011, Texas Instruments Incorporated