4N32, 4N33 Vishay Semiconductors Optocoupler, Photodarlington Output, High Gain, with Base Connection FEATURES A 1 6 B C 2 5 C NC 3 4 E * Very high current transfer ratio, 500 % min. * High isolation resistance, 1011 typical * Standard plastic DIP package * Compliant to RoHS Directive to 2002/95/EC and in accordance WEEE 2002/96/EC i179005_1 V D E AGENCY APPROVALS i179005 * UL1577, file no. E52744 system code H * DIN EN 60747-5-2 (VDE 0884)/DIN EN 60747-5-5 (pending), avialable with option 1 DESCRIPTION The 4N32 and 4N33 are optically coupled isolators with a gallium arsenide infrared LED and a solicon photodarlington sensor. Switching can be achieved while maintaining a high degree of isolation between driving and load circuits. These optocouplers can be used to replace reed and mercury relays with advantages of long life, high speed switching and elimination of magnetic fields. * BSI IEC60950; IEC60065 * FIMKO ORDERING INFORMATION 4 N 3 # PART NUMBER - X 0 # # PACKAGE OPTION DIP Option 6 7.62 mm 10.16 mm Option 7 Option 9 T TAPE AND REEL > 0.1 mm > 0.7 mm AGENCY CERTIFIED/PACKAGE CTR (%) UL, BSI, FIMKO 500 500 DIP-6 4N32 4N33 DIP-6, 400 mil, option 6 SMD-6, option 7 SMD-6, option 9 4N32-X006 - 4N32-X007T (1) 4N33-X007T (1) 4N32-X009T (1) 4N33-X009T (1) 500 500 DIP-6 4N32-X001 4N33-X001 SMD-6, option 7 4N32-X017T 4N33-X017T (1) VDE, UL, BSI, FIMKO Notes * Additional options may be possible, please contact sales office. (1) Also available in tubes, do not put T on the end. Document Number: 81865 Rev. 1.2, 15-Feb-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 1 4N32, 4N33 Vishay Semiconductors Optocoupler, Photodarlington Output, High Gain, with Base Connection ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT Reverse voltage VR 3 V Forward current IF 60 mA Power dissipation Pdiss Derate linearly from 55 C 100 mW 1.33 mW/C OUTPUT Collector emitter breakdown voltage BVCEO 30 V Emitter base breakdown voltage BVEBO 8 V Collector base breakdown voltage BVCBO 50 V Emitter collector breakdown voltage BVECO 5 V IC 100 mA Pdiss 150 mW 2 mW/C Collector (load) current Power dissipation Derate linearly COUPLER Total dissipation Ptot 250 mW 3.3 mW/C Derate linearly Isolation test voltage (between emitter 1s VISO 5300 VRMS 7 mm min. Leakage path Air path 7 mm min. VIO = 500 V, Tamb = 25 C RIO 1012 VIO = 500 V, Tamb = 100 C RIO 1011 Storage temperature Tstg - 55 to + 150 C Operating temperature Tamb - 55 to + 100 C Isolation resistance Lead soldering time (1) at 260 C 10 s Notes * Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices (SMD). Refer to wave profile for soldering conditions for through hole devices (DIP). ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. MAX. UNIT INPUT Forward voltage IF = 50 mA VF 1.25 1.5 V Reverse current VR = 3 V IR 0.1 100 A Capacitance VR = 0 V CO 25 pF OUTPUT Collector emitter breakdown voltage (1) IC = 100 A, IF = 0 BVCEO 30 Collector base breakdown voltage (1) IC = 100 A, IF = 0 BVCBO 50 V Emitter base breakdown voltage (1) IC = 100 A, IF = 0 BVEBO 8 V Emitter collector breakdown voltage (1) IC = 100 A, IF = 0 BVECO 5 Collector emitter leakage current VCE = 10 V, IF = 0 ICEO IC = 0.5 mA, VCE = 5 V hFE V 10 1 V 100 nA 13 COUPLER Collector emitter saturation voltage VCEsat 1 V Coupling capacitance 1.5 pF Notes * Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (1) Indicates JEDEC registered values. www.vishay.com 2 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 81865 Rev. 1.2, 15-Feb-11 4N32, 4N33 Optocoupler, Photodarlington Output, High Gain, with Base Connection Vishay Semiconductors CURRENT TRANSFER RATIO PARAMETER Current transfer ratio TEST CONDITION SYMBOL MIN. VCE = 10 V, IF = 10 mA CTR 500 MIN. TYP. MAX. UNIT % SWITCHING CHARACTERISTICS PARAMETER TEST CONDITION SYMBOL MAX. UNIT Turn-on time VCC = 10 V, IC = 50 mA ton TYP. 5 s Turn-off time IF = 200 mA, RL = 180 toff 100 s MAX. UNIT SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL MIN. Climatic classification (according to IEC 68 part 1) TYP. 55/100/21 Comparative tracking index CTI 175 399 VIOTM 8000 V VIORM 890 V PSO 700 mW ISI 400 mA TSI 175 C Creepage distance Standard DIP-6 7 mm Clearance distance Standard DIP-6 7 mm Creepage distance 400 mil DIP-6 8 mm Clearance distance 400 mil DIP-6 8 mm Insulation thickness, reinforced rated per IEC 60950 2.10.5.1 0.4 mm Note * As per IEC 60747-5-2, 7.4.3.8.1, this optocoupler is suitable for "safe electrical insulation" only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 1.0 10 Normalized to: VCE = 5 V IF = 10 mA 0.8 TA = 25 C VCE = 5 V 0.6 0.4 0.2 NICE - Normalized ICE NCTRCE - Normalized CTRCE 1.2 Normalized to: VCE = 5 V 1 IF = 10 mA VCE = 5 V TA = 25 C VCE = 1 V 0.1 0.01 VCE = 1 V 0.0 0.1 i4n32-33_02 1 10 100 1000 IF - LED Current (mA) Fig. 1 - Normalized Non-Saturated and Saturated CTRCE vs. LED Current Document Number: 81865 Rev. 1.2, 15-Feb-11 0.001 0.1 i4n32-33_03 1 10 100 IF - LED Current (mA) Fig. 2 - Normalized Non-Saturated and Saturated Collector Emitter Current vs. LED Current For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 3 4N32, 4N33 Optocoupler, Photodarlington Output, High Gain, with Base Connection Vishay Semiconductors 20 Normalized to: VCB = 3.5 V 1 IF = 10 mA tpHL - High/Low Propagation Delay (s) NICB - Normalized ICB 10 TA = 25 C 0.1 0.01 1 k 10 1 10 0 100 0 IF = LED Current (mA) i4n32-33_04 100 5 0.001 0.1 TA = 25 C VCC = 5 V VTH = 1.5 V 15 10 5 15 20 IF - LED Current (mA) i4n32-33_07 Fig. 6 - High to Low Propagation Delay vs. Collector Load Resistance and LED Current Fig. 3 - Normalized Collector Base Photocurrent vs. LED Current 10 000 hFE - Forward Transfer Gain TA = 25 C VCE = 5 V IF 8000 VCC RL 6000 VO 4000 tD tR VO tPLH IF VCE = 1 V 2000 VTH = 1.5 V tPHL 0 0.01 0.1 1 10 100 tS tF i4n32-33_08 Ib - Base Current (A) i4n32-33_05 Fig. 4 - Non-Saturated and Saturated hFE vs. Base Current Fig. 7 - Switching Waveform and Switching Schematic tpLH - Low/High Propagation Delay (s) 80 TA = 25 C, VCC = 5 V VTH = 1.5 V 1 k 60 220 40 470 20 100 0 0 i4n32-33_06 5 10 15 20 IF - LED Current (mA) Fig. 5 - Low to High Propagation Delay vs. Collector Load Resistance and LED Current www.vishay.com 4 For technical questions, contact: optocoupleranswers@vishay.com Document Number: 81865 Rev. 1.2, 15-Feb-11 4N32, 4N33 Optocoupler, Photodarlington Output, High Gain, with Base Connection Vishay Semiconductors PACKAGE DIMENSIONS in millimeters DIP-6 Package Dimensions Pin one ID 3 2 1 4 5 6 6.4 0.1 ISO method A 8.6 0.1 7.62 typ. 1.2 0.1 1 min. 3.555 0.255 18 4 typ. 2.95 0.5 0.8 min. 0.85 0.05 0.25 typ. 3 to 9 0.5 0.05 7.62 to 8.81 i178004 2.54 typ. Option 6 Option 7 Option 9 7.62 typ. 7.62 typ. 10.3 max. 7.62 typ. 0.7 min. 3.5 0.3 4.3 0.3 0.1 0.1 3.6 0.3 0.1 min. 8 min. 2.55 0.25 0.6 min. 10.3 max. 0.6 min. 8 min. 10.16 typ. 0.76 R 0.25 2.54 0.76 2.54 R 0.25 1.78 8 min. 11.05 20802-24 1.52 1.78 8 min. 11.05 1.52 PACKAGE MARKING 4N32 -X017 V YWW H 68 21764-18 Notes * Example marking for 4N32-X017T. * Only options 1, and 7 reflected in the package marking. * The VDE logo is only marked on option 1 parts. * Tape and reel suffix (T) is not part of the package marking. Document Number: 81865 Rev. 1.2, 15-Feb-11 For technical questions, contact: optocoupleranswers@vishay.com www.vishay.com 5 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Revision: 13-Jun-16 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: 4N32 4N33 4N32-X000 4N32-X001 4N32-X006 4N32-X007 4N32-X007T 4N32-X009 4N32-X009T 4N32-X017T 4N33-X000 4N33-X001 4N33-X009 4N33-X009T 4N33-X017 4N33-X007T 4N33-X007 4N33-X017T