Case: JEDEC DO--201 Molded Plastic.
Terminals: Axial leads, solderable per MIL-STD-750, Method 2026.
Polarity: Color and denotes cthode excep B ipolar.
Mounting Position: Any.
Peak Pulse Power Dissipation on 10/1000ȝs waveform. (Note 1, Note 2, Fig. 1) PPPM Minimum 600 Watts
Peak Pulse Current on 10/1000ȝs waveform. (Note 1,Fig. 3) IPPM See Table Amps
Steady State Power Dissipation at TL=75ćˈLead length .375”ˈ(9.5mm).
(Note 2, Fig. 5) PM(AV) 5.0 Watts
Peak Forward Surge Currentˈ8.3ms Single Half Sine-Wave Superimposed
on Rated Load. (JEDEC Method) (Note 3, Fig. 6) IFSM 100 Amps
Operating junction and Storage Temperature Range. TJ,T
STG -65 to +150 ć
FEATURES
MECHANICAL DATA
DEVICES FOR BIPOLAR APPLICATION
For surface mounted applications in order to optimize board space.
Low profile package.
Built-in strain relief.
Glass passivated junction.
Low inductance.
Excellent clamping capability.
Repetition Rate (duty cycle): 0.01%.
Fast response time: typically less than 1.0ps from 0 volt to VBRfor Unidirectional types.
Typical IRless than 1μA above 10V.
High Temperature soldering: 260°C/10 seconds at terminals.
P
M
SMB/DO-214AA
Case: JEDEC DO-214AA. Molded plastic over glass passivated junction.
Terminal: Solder plated, solderable per MIL-STD-750, Method 2026.
Polarity: Color band denotes cathode except Bidirectional.
Standard Packaging: 12mm tape (EIA STD RS-481).
Weight: 0.003ounce, 0.093 grams.
For Bidirectional use CA suffix for type P6SMB6.8CA through type P6SMB550CA;
Electrical characteristics apply in both directions.
Ratings at 25ćambient temperature unless otherwise specified.
N
2
.
UL E223045
Transient Voltage Suppressors
P6SMB Series MERITEK
RATING SYMBOL VALUE UNIT
Notes: 1. Non-repetitive current pulse, per Fig. 3and derated above TA= 25ćper Fig. 2.
2. Mounted on 5.0mm x 5.0mm (0.03mm thick) Copper Pads to each terminal.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4pulses per minute maximum.
MAXIMUM RATINGS AND CHARACTERISTICS
All specifications are subject to change without notice.
1
Rev 7
Transient Voltage Suppressors
P6SMB Series MERITEK
t
s
T1
d
T
D1 D
L
Cathode Band
Item Min. Max. Min. Max.
L 4.06 4.57 0.160 0.180
D 3.30 3.94 0.130 0.155
D1 1.95 2.20 0.077 0.086
T 5.21 5.59 0.205 0.220
T1 0.76 1.52 0.030 0.060
d - 0.203 - 0.008
s 2.13 2.440.084 0.096
t 0.152 0.305 0.006 0.012
Millimeters Inches
SMB/DO-214AA
PACKAGE DIMENSIONS
Part Number
Device
Marking
Code
Reverse
S
tand-Of
f
Voltage
Breakdown
Voltage
@IT
Breakdown
Voltage
@IT
Test
Current
Maximum
Clamping
Voltage
@IPP
Peak
Pulse
Current
Reverse
Leakage
@VRWM
UNI-POLAR BI-POLAR UNI BI VRWM(V) VBR MIN.(V) VBR MAX.(V) IT(mA) VC(V) IPP(A) IR(µA)
P6SMB6.8A P6SMB6.8CA 6V8A 6V8C 5.80 6.45 7.14 10 10.5 58.1 1000
P6SMB7.5A P6SMB7.5CA 7V5A 7V5C 6.40 7.13 7.88 10 11.3 54.0 500
P6SMB8.2A P6SMB8.2CA 8V2A 8V2C 7.02 7.79 8.61 10 12.1 50.4 200
P6SMB9.1A P6SMB9.1CA 9V1A 9V1C 7.78 8.65 9.55 1 13.4 45.5 50
P6SMB10A P6SMB10CA 10A 10C 8.55 9.50 10.50 1 14.5 42.1 10
P6SMB11A P6SMB11CA 11A 11C 9.40 10.50 11.60 1 15.6 39.1 5
P6SMB12A P6SMB12CA 12A 12C 10.20 11.40 12.60 1 16.7 36.5 5
P6SMB13A P6SMB13CA 13A 13C 11.10 12.40 13.70 1 18.2 33.5 1
P6SMB15A P6SMB15CA 15A 15C 12.80 14.30 15.80 1 21.2 28.8 1
P6SMB16A P6SMB16CA 16A 16C 13.60 15.20 16.80 1 22.5 27.1 1
P6SMB18A P6SMB18CA 18A 18C 15.30 17.10 18.90 1 25.5 24.2 1
P6SMB20A P6SMB20CA 20A 20C 17.10 19.00 21.00 1 27.7 22.0 1
P6SMB22A P6SMB22CA 22A 22C 18.80 20.90 23.10 1 30.6 19.9 1
P6SMB24A P6SMB24CA 24A 24C 20.50 22.80 25.20 1 33.2 18.4 1
P6SMB27A P6SMB27CA 27A 27C 23.10 25.70 28.40 1 37.5 16.3 1
SPECIFICATIONS
2
Rev 7
Transient Voltage Suppressors
P6SMB Series MERITEK
P6SMB30A P6SMB30CA 30A 30C 25.60 28.50 31.50 1 C41.4 14.7 1
P6SMB33A P6SMB33CA 33A 33C 28.20 31.40 34.70 1 45.7 13.3 1
P6SMB36A P6SMB36CA 36A 36C 30.80 34.20 37.80 1 49.9 12.2 1
P6SMB39A P6SMB39CA 39A 39C 33.30 37.10 41.00 1 53.9 11.3 1
P6SMB43A P6SMB43CA 43A 43C 36.80 40.90 45.20 1 59.3 10.3 1
P6SMB47A P6SMB47CA 47A 47C 40.20 44.70 49.40 1 64.8 9.4 1
P6SMB51A P6SMB51CA 51A 51C 43.60 48.50 53.60 1 70.1 8.7 1
P6SMB56A P6SMB56CA 56A 56C 47.80 53.20 58.80 1 77.0 7.9 1
P6SMB62A P6SMB62CA 62A 62C 53.00 58.90 65.10 1 85.0 7.2 1
P6SMB68A P6SMB68CA 68A 68C 58.10 64.60 71.40 1 92.0 6.6 1
P6SMB75A P6SMB75CA 75A 75C 64.10 71.30 78.80 1 103.0 5.9 1
P6SMB82A P6SMB82CA 82A 82C 70.10 77.90 86.10 1 113.0 5.4 1
P6SMB91A P6SMB91CA 91A 91C 77.80 86.50 95.50 1 125.0 4.9 1
P6SMB100A P6SMB100CA 100A 100C 85.50 95.00 105.00 1 137.0 4.5 1
P6SMB110A P6SMB110CA 110A 110C 94.00 105.00 116.00 1 152.0 4.0 1
P6SMB120A P6SMB120CA 120A 120C 102.00 114.00 126.00 1 165.0 3.7 1
P6SMB130A P6SMB130CA 130A 130C 111.00 124.00 137.00 1 179.0 3.4 1
P6SMB150A P6SMB150CA 150A 150C 128.00 143.00 158.00 1 207.0 2.9 1
P6SMB160A P6SMB160CA 160A 160C 136.00 152.00 168.00 1 219.0 2.8 1
P6SMB170A P6SMB170CA 170A 170C 145.00 162.00 179.00 1 234.0 2.6 1
P6SMB180A P6SMB180CA 180A 180C 154.00 171.00 189.00 1 246.0 2.5 1
P6SMB200A P6SMB200CA 200A 200C 171.00 190.00 210.00 1 274.0 2.2 1
P6SMB220A P6SMB220CA 220A 220C 185.00 209.00 231.00 1 328.0 1.9 1
P6SMB250A P6SMB250CA 250A 250C 214.00 237.00 263.00 1 344.0 1.8 1
P6SMB300A P6SMB300CA 300A 300C 256.00 285.00 315.00 1 414.0 1.5 1
P6SMB350A P6SMB350CA 350A 350C 300.00 332.00 368.00 1 482.0 1.3 1
P6SMB400A P6SMB400CA 400A 400C 342.00 380.00 420.00 1 548.0 1.1 1
P6SMB440A P6SMB440CA 440A 440C 376.00 418.00 462.00 1 602.0 1.0 1
P6SMB480A P6SMB480CA 480A 480C 408.00 456.00 504.00 1 658.0 0.9 1
P6SMB510A P6SMB510CA 510A 510C 434.00 485.00 535.00 1 698.0 0.9 1
P6SMB530A P6SMB530CA 530A 530C 477.00 503.50 556.50 1 725.0 0.8 1
P6SMB540A P6SMB540CA 540A 540C 486.00 513.00 567.00 1 740.0 0.8 1
P6SMB550A P6SMB550CA 550A 550C 495.00 522.50 577.50 1 760.0 0.8 1
3DUW 1XPEHU
'HYLFH
0DUNLQJ
&RGH
5HYHUVH
6WDQG2II
9ROWDJH
%UHDNGRZQ
9ROWDJH
#,7
%UHDNGRZQ
9ROWDJH
#,7
7HVW
&XUUHQW
0D[LPXP
&ODPSLQJ
9ROWDJH
#,33
3HDN
3XOVH
&XUUHQW
5HYHUVH
/HDNDJH
#95:0
81,32/$5 %,32/$5 81, %, 95:09 9%5 0,19 9%5 0$;9 ,7P$ 9&9 ,33$ ,5$
Note: For Bidirectional type having VRWM of 10 volts and less,the IR limit doubles.
3
Rev 7
Figure 1 - Peak Pulse Power Rating Curve Figure 2 - Pulse Derating Curve
Figure 3 - Pulse Waveform Figure 4 - Typical Junction Capacitance
Figure 5 - Steady State Power Dissipation Derating Curve
Figure 6 - Maximum Non-Repetitive Forward
Surge Current Uni-Directional Only
RATING AND CHARACTERISTIC CURVES (TA: 25°C UNLESS OTHERWISE SPECIFIED)
Transient Voltage Suppressors
P6SMB Series MERITEK
0
1
2
3
4
5
6
0 25 50 75 100 125 150 175
PM(AV), Steady State Power Dissipation (W)
TA - Ambient Temperature (ºC)
0
20
40
60
80
100
120
1 10 100
Number of Cycles at 60 Hz
IFSM - Peak Forward Surge Current (A)
IPPM- Peak Pulse Current, % IRSM
0
0
50
100
150
1.0 2.0 3.0 4.0
tr=10μsec
Peak Value
IPPM
IPPM
2
TJ=25°C
Pulse Width(td) is defined
as the point where the peak
current decays to 50% of IPPM
10/1000μsec. Waveform
as defined by R.E.A
td
t-Time (ms)
Half Value
IPPM ( )
1
10
100
1000
10000
1.0 10.0 100.0 1000.0
Cj (pF)
Tj=25C
f=1.0MHz
Vsig=50mVp-p
Uni-directional V=0V
Bi-directional V=0V
Uni-directional @VR
Bi-directional @VR
VBR - Reverse Breakdown Voltage (V)
0.1
1
10
100
0.000001 0.00001 0.0001 0.001
td-Pulse Width (sec.)
0.2x0.2" (5.0x5.0mm)
Copper Pad Area
PPPM-Peak Pulse Power (kW)
0
25
50
75
100
0 25 50 75 100 125 150 17
5
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage %
TA - Ambient Temperature (ºC)
4
Rev 7