MODELS 898, 899 ee Dual-In-Line Thick Film ical . et Resistor Networks eo i aah] hs y i ont i P euecrnican Standard Resistance Range, Ohms * 10 to 10Meg Standard Resistance Tolerance, at 25C +2% (<33 Ohms = +2 Ohms) Optional: +1% (F Tol.) Operating Temperature Range -55C to +125C Temperature Coefficient of Resistance +100ppm/C (<100 Ohms = +250ppm/C) Temperature Coefficient of Resistance Tracking +50ppm/C Maximum Operating Voltage 100Vde or VPR Insulation Resistance >10,000 Megohms Thermal Shock plus Power Conditioning AR 0.70% Short Time Overload AR 0.50% Terminal Strength AR 0.25% Moisture Resistance AR 0.50% Mechanical Shock AR 0.25% Vibration AR 0.25% Low Temperature Storage AR 0.25% High Temperature Exposure AR 0.50% Load Life, 1,000 Hours AR 1.00% Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) AR 0.25% Dielectric Withstanding Voltage 200V rms for 1 minute Temperature Exposure, Maximum 215C for 3 minutes Marking Permanency MIL-STD-202, Method 215 Lead Solderability MIL-STD-202, Method 208 Flammability UL-94V-O Rated Storage Temperature Range -55C to +125C * Plus 0 Ohm jumper Specifications subject to change without notice. z | 3i technologies 4-161 Models 898, 899Lead Material Copper Alloy, 60/40 Tin-Lead (Plating) Substrate Material Alumina Resistor Material Cermet APPLICABLE DOCUMENTS MIL-R-83401 Resistor Networks, Fixed, Film, General Specifications MIL-STD-105 Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 Test Methods for Electronic and Electrical Component Parts STANDARD RESISTANCE VALUES, OHMS POWER DISSIPATION, WATTS AT 70C -3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors) Resistor (Per Circuit) 22 390 5.6K 100K Model Package -1 3 5 27 470 6.8K 120K 8982.0 125 250 125 38 O10 8.2K 10K 399 1.8 125 250 125 39 560 10K 180K 47 680 12K 200K 51 820 15K 220K 56 1K 18K 270K 68 1.2K 20K 330K 82 1.5K 22K 390K 100 1.8K 27K 470K 120 2K 33K 510K 150 2.2K 39K 560K 180 2.7K 47K 680K 200 3.3K 51K 820K 220 3.9K 56K 1Meg 270 47K 68K 330 5.1K 82K -5 Circuit (Dual Terminators) R1/R2 R1/R2 R1/R2 R1/R2 180/390 220/330 330/470 3K/6.2K 220/270 330/390 330/680 z |i technologies 4-162 Models 898, 899Model 8988 ~+~_ so Max; Notes: 780 Unless otherwise specified, Model 899 79 9 Max. tolerances are , .005 vy + 0.13 5 T 250 pos Bi | 340+ 020 yay 6.35 | 8642051 { e WA EAA AE 125 050 060 pag pan we r [182 | > + _ 020 F185 I| a we 020 vain 95 Max. 100 + .010* | rm 135 + .030 080 +.020 ye 254202 te 3.43 + 0.76 2,030.51 0.46 0.08 Ls 600+.010_ 1524025 eTsani : 700 + 010 Typical spacing 1784025 non-accumulating lead thickness: .010 + 002 0.25 + 0.05 -3 Circuit - Isolated Resistors N LV AV AAA AVS -1 Circuit - Bussed Res N LV AVAV AVN AN . Circuit - Dual Terminator AAA LAAL istors 3 2 3 3 2 3 3 2 2 3 3 3 3 3 3 3 2 2 3 3 + 3 = = 3 3 3 3 3 3 = 3 3 = 3 3 3 = 2: 3 3 3 3 3 Vy Ww VV 1 Ni2 VonVen - 5.2 (Veg) Pull-Down cc 167), nx LAVA AVA 3 3R SR $A SR HI c 3 < =R ZR 3R SR ER 3 3 =R 3 3 3 3 3 3 < 2 I 1 =R < 2 2 3 WAVAVAVAVAVAY, 1 N/2 16 qr wv -45 Circuit - TTL to ECL Translator Vee p-TTL Inputs 4 PIF I 1802 2702 8202 =R " Vw WV VV Voc VEE Custom Model: 898-42-R (R) R=5102 Note: Model 899: N = 114 Leads, Model 898: N = 16 Leads. Custom circuits are available. Consult Factory. i yey yy TAP Yoo -OutputsToECL Ver Custom Model: 898-45 Ry=180Q Ro=270Q2 R9=8202 551 technologies 4-163 Models 898, 899TYPICAL PART MARKING Bi 898-3-R10K Date Code Optional Locations Lead 1 Indicator Resistance Value Package Code # Of Leads Circuit Type: (-1 Bussed) 899 = 14 Leads (-3 Isolated) 898 = 16 Leads (-5 Dual Terminator) Standard: Magazines All Units oriented with lead #1 to the same side. Magazine: Material = Antistatic Plastic Capacity = 25 Units ORDERING INFORMATION 89 9 -5- R220/R330 F Model Series Tolerance Code: Number of Leads: F =+1% 9 = 14 Leads (No code used for standard tolerances.) 8 = 16 Leads R2 Resistance Value: Circuit Type: (Add for -5 circuit only) 3 = Isolated 1 = Bussed 5 = Dual Terminator Resistance Value z |i technologies 4-164 Models 898, 899