TESTING GU (General Use) Type SOP Series 1- Channel (Form B) 4-Pin Type 4.30.2 .169.008 2. Low on resistance for normallyclosed type This has been realized thanks to the builtin MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method. 4.40.2 .173.008 2.10.2 .083.008 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of 1nA even with the rated load voltage of 350 V (AQY410S). , mm inch FEATURES PhotoMOS RELAYS Passivation membrane Intermediate Source electrode Gate electrode insulating membrane , , 1. SO package 4-Pin type in super miniature design The device comes in a super-miniature SO package 4-Pin type measuring (W) 4.3x(L) 4.4x(H) 2.1 mm (W) .169x(L) .173x(H) .083 inch --approx. 70% of the volume and 70% of the footprint size of SO package 6-pin type PhotoMOS Relays. Cross section of the normally-closed type of power MOS (6-pin) N+ P+ N+ N+ P+ N+ Gate oxidation membrane N- Drain electrode N+ (4-pin) Approx. 70% 3. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. Volume TYPICAL APPLICATIONS * Telecommunications (PC, Electoronic Notepad) * Measuring and Testing equipment * Factory Automation Equipment * Security equipment * High speed inspection machines Approx. 70% Footprint TYPES AC/DC type Output rating* Load voltage Load current 350 V 120 mA 400 V 100 mA Part No. Picked from the 1/2-pin side Picked from the 3/4-pin side AQY410SX AQY410SZ AQY414SX AQY414SZ Packing quantity in tape and reel 1,000 pcs. * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the top two letters of the product number "AQY" and "S" are omitted on the product seal. The package type indicator "X" and "Z" are omitted from the seal. (Ex. the label for product number AQY414S is 414). RATING AC/DC type 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current (peak AC) Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperture Operating limits Storage Symbol IF VR IFP Pin VL AQY410S AQY414S 350 V 400 V IL 0.12 A 0.1 A Ipeak Pout PT Viso Topr Tstg 0.3 A 50 mA 3V 1A 75 mW Remarks f = 100 Hz, Duty factor = 0.1% 0.24 A 300 mW 350 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F 100ms (1 shot), VL = DC Non-condensing at low temperatures 477 AQY41S 2. Electrical characteristics (Ambient temperature: 25C 77F ) Item LED operate (OFF) current LED reverse (ON) current Input LED dropout voltage Symbol Typical Maximum Minimum Typical Typical Maximum AQY410S AQY414S 0.9 mA 3 mA 0.4 mA 0.85 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V IFon IFoff VF Typical On resistance Ron Maximum Output Off state leakage current Maximum Typical Maximum Typical Reverse (ON) time* Transfer Maximum characteristics Typical I/O capacitance Maximum Initial I/O isolaMinimum tion resistance Operate (OFF) time* 18 26 25 35 Remarks IL = Max. IL = Max. IF = 5 mA IF = 0 mA IL = Max. Within 1 s on time IF = 5 mA VL = Max. 1 A ILeak 0.52 ms Ton 0.47 ms IF = 0 mA-->5 mA IL = Max. 0.28 ms IF = 5 mA-->0 mA IL = Max. 1 ms 0.23 ms Toff 1 ms 0.8 pF 1.5 pF Ciso f = 1 MHz VB = 0 1,000 M Riso 500 V DC *Operate/Reverse time Input Output 10% 90% Toff Ton For Dimensions, see Page 441. For Schematic and Wiring Diagrams, see Page 445. For Cautions for Use, see Page 449. REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 3 and 4; LED current: 0 mA; Continuous load current: Max.(DC) LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) 30 100 25 AQY414S 80 60 20 AQY410S 15 1.5 1 AQY414S 0.5 AQY410S 5 20 478 AQY414S 10 40 0 -40 -20 On resistance, Load current, mA 120 2 AQY410S Operate (OFF) time, ms 140 0 20 40 60 80 85 100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C AQY41S 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) Load voltage: Max.(DC); Continuous load current: Max.(DC) Load voltage: Max.(DC); Continuous load current: Max.(DC) 0.8 0.6 0.4 AQY414S 0.2 5 LED operate (OFF) current, mA LED operate (OFF) current, mA Reverse (ON) time, ms 1.0 4 3 2 1 5 4 3 2 1 AQY410S 0 -40 -20 0 0 20 40 60 80 85 100 Ambient temperature, C -40 -20 7. LED dropout voltage vs. ambient temperature characteristics 8. Voltage vs. current characteristics of output at MOS portion LED current: 5 to 50 mA Measured portion: between terminals 3 and 4; Ambient temperature: 25C 77F 1.4 1.3 1.2 1.0 0 -40 -20 AQY414S 0.5 1 1.5 2 2.5 3 -20 Voltage, V -40 -60 -80 -100 -120 -140 50mA 30mA 20mA 10mA 5mA 1.1 AQY410S 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 80 85 Ambient temperature, C 9. Off state leakage current Measured portion: between terminals 3 and 4; LED current: 5 mA; Ambient temperature: 25C 77F Off state leakage current, A 140 120 100 80 60 40 20 -3 -2.5 -2 -1.5 -1 -0.5 Current, mA LED dropout voltage, V 1.5 0 0 20 40 60 80 85 Ambient temperature, C 10-3 10-6 10-9 10-12 0 20 40 60 80 Load voltage, V 100 11. LED forward current vs. reverse (ON) time characteristics 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 3 and 4; Load voltage: Max.(DC); Continuous load current: Max.(DC); Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; Load voltage: Max.(DC); Continuous load currentMax.(DC); Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; Frequency: 1 MHz; Ambient temperature: 25C 77F 0.6 2.5 0.5 2.0 1.5 1.0 0.5 0 9/1/2000 120 Output capacitance, pF 3.0 Reverse (ON) time, ms Operate (OFF) time, ms 10. LED forward current vs. operate (OFF) time characteristics 0.4 0.3 0.2 0.1 0 10 20 30 40 50 LED forward current, mA 60 0 100 80 60 40 20 0 10 20 30 40 50 LED forward current, mA 60 0 0 10 20 30 40 50 Applied voltage, V 60 All Rights Reserved, (c) Copyright Matsushita Electric Works, 479 Ltd. Go To Online Catalog