FCN-367J040-AU/F - Omron Electronics

XW2Z XW2Z

Dimensions

Unit: mm (inch)

3XW2Z-PPPA FOR 32-POINT PLC I/O MODULES (CONNECTOR TYPE)

The G79-PC Cable with a connector for the G7TC cannot be

used for the XW2C due to a difference in wiring. The G79-PC

Cable can be used for some of the XW2B Screw Terminal

Blocks, refer to the XW2B data sheet.

Cable length L

Part number Cable length L

XW2Z-050A 0.5 m (1.64 ft)

XW2Z-100A 1 m (3.28 ft)

XW2Z-150A 1.5 m (4.92 ft)

XW2Z-200A 2 m (6.56 ft)

XW2Z-300A 3 m (9.84 ft)

XW2Z-500A 5 m (16.40 ft)

Wiring Diagram

FCN-367J024-AU/F

(mated side)

XG4M-2030

(mated side)

Triangle mark

Combinations of Omron PLC I/O Modules and Screw Terminal Blocks

PLC I/O module I/O points Terminal block Dedicated cable

C200H-ID215

C200H-OD215

C200H-MD215

C200H-MD115

C200H-MD501

C200H-ID501

C200H-OD501

C500-ID218CN

C500-ID501CN

C500-OD415CN

C500-MD211CN

C500-OD501CN

32 points input

32 points output

16 points in/16 points out

32 points input

32 points output

32 points input

32 points output

16 points in/16 points out

32 points output

XW2B-20G5

XW2B-20G4

XW2B-40G5-T

XW2B-20G5-D

XW2Z-PPPA

C200H-ID215

C200H-ID501

C500-ID218CN

C500-ID501CN

C200H-MD215

C200H-MD115

C200H-MD501

C500--MD211CN

32 points input

16 points in/16 points out

XW2C-20G5-IN16

(See Note 3)

Note: 1. The G79-PCable with a connector for the G7TC cannot be used for the XW2C due to a difference in wiring. The G79-PC

Cable can be used for some of the XW2B Screw Terminal Blocks, refer to the XW2B data sheet.

2. The Input or Output Modules above have two connectors, so each one can use up to two Terminal Blocks and two dedicated

cables.

3. The XW2C is a dedicated Input Terminal Block. If the XW2C is connected to a PLC module that handles both input and output

signals (modules with “MD” in the part number), only the input portion of the PLC module can be used.

XW2Z XW2Z

Unit: mm (inch)

3XW2Z-PPPB FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)

Cable length L

Part number Cable length L

XW2Z-050B 0.5 m (1.64 ft)

XW2Z-100B 1 m (3.28 ft)

XW2Z-150B 1.5 m (4.92 ft)

XW2Z-200B 2 m (6.56 ft)

XW2Z-300B 3 m (9.84 ft)

XW2Z-500B 5 m (16.40 ft)

Wiring Diagram

FCN-367J040-AU/F

(mated side) XG4M-4030

(mated side)

Triangle mark

Combinations of Omron PLC I/O Modules and Screw Terminal Blocks

PLC I/O module I/O points Terminal block Dedicated cable

CQM1-ID213

CQM1-OD213

C200H-ID216

C200H-OD218

C200H-OD21B

32 points XW2B-40G5

XW2B-40G4 XW2Z-PPPB

C200H-ID111

C200H-ID217

C200H-OD219

C500-ID114

3G2A5-ID219

3G2A5-OD213

64 points

Note: 32-point I/O modules use one Terminal Block and one dedicated cable.

64-point I/O modules use two Terminal Blocks and two dedicated cables.

XW2Z XW2Z

3XW2Z-PPPD FOR 32-POINT AND 64-POINT PLC I/O MODULES (CONNECTOR TYPE)

Cable length for A and B

Line

ALine

Yellow

Black

B250 (9.84)

500 (19.68)

XW2Z-P00D

Part number Cable length A Cable length B

XW2Z-100D 1 m (3.28 ft) 0.75 m (2.46 ft)

XW2Z-150D 1.5 m (4.92 ft) 1.25 m (4.10 ft)

XW2Z-200D 2 m (6.56 ft) 1.75 m (5.74 ft)

XW2Z-300D 3 m (9.84 ft) 2.75 m (9.02 ft)

XW2Z-500D 5 m (16.40 ft) 4.75 m (15.58 ft)

Note: 1. CN2 (black cable side) is wired to line A of CN1 and

CN3 (yellow cable side) is wired to line B of CN1.

2. The G79-PC Cable for the G7TC Terminal Block can-

not be used for the XW2C due to a difference in wiring.

FCN-367J024-AU/F

CN1 (mated side) XG4M-2030

CN3 (mated side)

Triangle mark

XG4M-2030

CN2 (mated side)

Triangle mark

Wiring Diagram

Combinations of Omron PLC I/O Modules and Screw Terminal Blocks

PLC I/O module I/O points Terminal block Dedicated cable

CQM1-ID213

C200H-ID216 32 points Two XW2C-20GS-IN16 input blocks One XW2Z-PPPD cable

C200H-ID217

64 points Four XW2C-20GS-IN16 input blocks Two XW2Z-PPPD cables

3G2A5-ID219

XW2Z XW2Z

Unit: mm (inch)

3XW2Z-PPPH-PFOR 96-POINT CS1 PLC I/O MODULES (CONNECTOR TYPE)

XW2Z-P00H-2 XW2Z-P00H-3XW2Z-P00H-1

AAA

Part number Cable length A

XW2Z-100H-1 1 m (3.28 ft)

XW2Z-200H-1 2 m (6.56 ft)

XW2Z-300H-1 3 m (9.84 ft)

XW2Z-500H-1 5 m (16.40 ft)

Part number Cable length A Cable length B

XW2Z-100H-2 1 m (3.28 ft) 1 m (3.28 ft)

XW2Z-200H-2 2 m (6.56 ft) 2 m (6.56 ft)

XW2Z-300H-2 3 m (9.84 ft) 3 m (9.84 ft)

XW2Z-500H-2 5 m (16.40 ft) 5 m (16.40 ft)

Part number Cable length

A B C

XW2Z-100H-3 1 m (3.28 ft) 0.75 ft (2.45 ft) 1 m (3.28 ft)

XW2Z-200H-3 2 m (6.56 ft) 1.75 ft (5.74 ft) 2 m (6.56 ft)

XW2Z-300H-3 3 m (9.84 ft) 2.75 ft (9.02 ft) 3 m (9.84 ft)

XW2Z-500H-3 5m

(16.40 ft) 4.75 ft

(15.58 ft) 5m

(16.40 ft)

Combinations of Omron PLC I/O Modules and Screw Terminal Blocks

PLC I/O module I/O points Terminal blocks Dedicated cable

CS1W-ID291,

CS1W-OD291, CS1W-OD292

CS1W-MD291, CS1W-MD292

96 points Two XW2B-60GPterminal blocks Two XW2Z-PPPH-1 cables

CS1W-ID291,

CS1W-OD291, CS1W-OD292

CS1W-MD291, CS1W-MD292

96 points Two XW2B-40G4 + XW2B-20G4 or

two XW2B-40G5 + XW2B-20G5

terminal blocks

Two XW2Z-PPPH-2 cables

CS1W-ID291,

CS1W-OD291, CS1W-OD292

CS1W-MD291, CS1W-MD292

96 points Six XW2B-20G4 or six XW2B-20G5

terminal blocks Two XW2Z-PPPH-3 cables

Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A.

XW2Z XW2Z

3XW2Z-PPPF CABLE WITH CRIMP TERMINALS (20 POLES)

Cable length L

devices

XG4M-2030 Terminal Y

(M3.5)

300

(11.81)

Wiring Diagram

XG4M-2030

(mated side)

Triangle mark

Terminal Y

(M3.5)

Part number Cable length L

XW2Z-100F 1 m (3.28 ft)

XW2Z-150F 1.5 m (4.92 ft)

XW2Z-200F 2 m (6.56 ft)

XW2Z-300F 3 m (9.84 ft)

XW2Z-500F 5 m (16.40 ft)

Combinations of Omron PLC I/O Modules and Screw Terminal Blocks

PLC I/O module Terminal block Dedicated cable

Use any I/O module with a terminal block

from Omron or another manufacturer, or an

I/O board for a computer.

XW2B-20G5

XW2B-20G4 XW2Z-PPPF

XW2Z XW2Z

Installation

3CONNECTIONS BETWEEN OMRON’S I/O MODULES AND SCREW TERMINAL BLOCKS

Item Input (ID) Output (OD)

PLC I/O modules

C200H-ID215

C200H-ID501

C500-ID501CN

C500-ID218CN

32-point input modules use two

blocks and two cables.

C200H-OD215

C200H-OD501

C500-OD501CN

32-point output modules use two

blocks and two cables.

Terminal blocks XW2B-20G5

XW2B-20G4 XW2B-20G5

XW2B-20G4

Cable

XW2Z-PPPAXW2Z-PPPA

Connection

diagram XW2B--20G5 XW2B--20G5

Cable

G79-PCG79-PC

Connection

diagram XW2B-20G5 XW2B-20G5

XW2Z XW2Z

Item Output (OD)

PLC I/O module

C500-OD415CN

32-point output module uses

two blocks and two cables.

Terminal block

XW2B-20G5

XW2B-20G4

Cable

XW2Z-PPPAG79-PC

Connection

diagram XW2B-20G5

XW2B-20G5

XW2Z XW2Z

Item Mixed I/O (MD)

PLC I/O modules

C200H-MD115

C200H-MD215

C200H-MD501

C500-MD211CN

16-point input/16-point output mixed I/O

modules use two blocks and two cables.

Terminal blocks XW2B-20G5

XW2B-20G4

Cable

XW2Z-PPPAG79-PC

Connection

diagram XW2B-20G5

XW2B-20G5

XW2Z XW2Z

Item Group 2 High--density Input/Output

PLC I/O module CQM1-ID213 32-point Use one terminal block and one cable.

C200H-ID216 32-point Use one terminal block and one cable.

C200H-ID111 64-point Use two terminal blocks and two cables.

C200H-ID217 64-point Use two terminal blocks and two cables.

C500-ID114 64-point Use two terminal blocks and two cables.

3G2A5-ID219 64-point Use two terminal blocks and two cables.

CQM1-OD213 32-point Use one terminal block and one cable.

C200H-OD218 32-point Use one terminal block and one cable.

C200H-OD219 64-point Use two terminal blocks and two cables.

Terminal block XW2B-40G5

XW2B-40G4

Cable XW2Z-PPPB

Connection

diagram XW2B-40G5

()

() ()

XW2Z XW2Z

Item High-density I/O 1:1 Connection

PLC I/O module

CS1W-ID29P

CS1W-OD29P

CS1W-MD29P

Use two terminal blocks and two cables.

Terminal block One XW2B-60G5 or

one XW2B-60G4 per cable

Cable XW2Z-PPPH-1

Connection XW2B-60GP

Item High-density I/O 1:2 Connection

PLC I/O module

CS1W-ID29P

CS1W-OD29P

CS1W-MD29P

Use two 40-point and two 20-point

terminal blocks and two cables.

Terminal block

XW2B-40G5 + XW2B-20G5 blocks or

XW2B-40G4 + XW2B-20G4 blocks

per cable

Cable

XW2Z-PPPH-2

Connection XW2B-40GPXW2B-20GP

Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A.

XW2Z XW2Z

Item High-density I/O 1:3 Connection

PLC I/O module

CS1W-ID29P

CS1W-OD29P

CS1W-MD29P

Use six 20-point terminal blocks of

the same kind and two cables.

Terminal block Three XW2B-20G5 blocks or

three XW2B-20G4 blocks

per cable

Cable

XW2Z-PPPH-3

Connection XW2B-20GPXW2B-20GP

XW2B-20GP

Note: For detailed information about connector pin-outs, refer to CS1 Operation Manual (W339), Appendix A.

Cat. No. GC RIO-1 04/00 Specifications subject to change without notice. Printed in U.S.A.

OMRON ELECTRONICS, INC.

OneEastCommerceDrive

Schaumburg, IL 60173

NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.

1-800-55-OMRON

OMRON CANADA, INC.

885 Milner Avenue

Scarborough, Ontario M1B 5V

416-286-6465