Field Programmable Oscillator The Smart Timing Choice Features Applications Support for 8 MEMS oscillator families Generic samples in seconds for prototype builds * Low power (SiT1602, SiT8008, SiT8009) * Ultra-performance (SiT8208, SiT8209) * Ultra-performance differential (SiT9120, SiT9121, SiT9122) * High temp (SiT1618, SiT8918, SiT8919, SiT8920, SiT8921) * AEC-Q100 Automotive (SiT2024, SiT2025, SiT8924, SiT8925) * Clock Generators (SiT2001, SiT2002, SiT2018, SiT2019, SiT2020, SiT2021) * VCXO (SiT3807, SiT3808, SiT3809) * Differential VCXO (SiT3821, SiT3822) * Spread spectrum (SiT9001, SiT9003) * Differential spread spectrum (SiT9002) Experiment with different options for optimal timing margin Configure different drive strengths for best EMI and/or to drive larger loads Fast prototype builds Wide variety of programmable options * Frequency from 1 - 625 MHz * Frequency stability from 20 to 50 ppm * Supply voltages of 1.8V or 2.5 to 3.3V * Operating temperature up to 125 C and down to -55C * Package sizes for 2.0 x 1.6 mmxmm to 7.0 x 5.0 mmxmm * Pull ranges from 25 to 1600 ppm (VCXO only) * Spread percentage from 0.25% to 2% or -0.5% to -4% (Spread spectrum only) * Rise/fall time from 0.25 ns to 40 ns Pb-free, RoHS and REACH compliant Description SiTime offers a wide range of field programmable (FP) MEMS oscillators including simple oscillators, differential oscillators, high temperature oscillators, VCXO and spread spectrum oscillators. These FP devices support the same specifications and performance as their factory-programmed counterparts. They enable engineers to experiment with different configurations and generate customized samples in seconds for fast prototyping. Figure 1 illustrates the simple programming setup required for programming SiTime FP devices by using the SiT6100DK, a field programming kit. Refer to SiT6100DK quick start guide and other documents for more information http://www.sitime.com/time-machine. For production volume, SiTime offers factory programming of its entire portfolio with the shortest lead time available in the industry. Figure 1. Field Programmable Software and Hardware SiTime Corporation Rev. 1.4 990 Almanor Avenue, Sunnyvale, CA 94085 (408) 328-4400 www.sitime.com Revised March 14, 2016 Field Programmable Oscillator The Smart Timing Choice Field Programmable Device Ordering Information A FP device works as a superset of its programmed counterpart. In certain cases, it can also be mapped to different programmed base products. As an example, SiT8008AI-71-XXX-000.FP0000 is a field programmable device in the low power family. It comes in the 2.1 x 1.6 mm x mm package, and can be programmed to support different combinations of the following: * Frequency: 1 MHz to 110 MHz with 6 decimal places of accuracy * Frequency stability: 20 ppm, 25 ppm, 50 ppm * Temperature range: -20C to 70C, -40C to 85C * Supply voltages: 1.8V or 2.5V to 3.3V * Output drive strength: 8 different options for different rise/fall time In addition, the SiT8008AI-11--XXX-000.FP0000 can be used for either SiT1602 or SiT8008 in the 2.0 x 1.6 mm x mm package. The SiT1602 and the SiT8008 share similar electrical specs and the same field programmable devices, but they support different frequencies. Below is a complete summary of all currently available field programmable devices, the mapping to the programmed devices and the supported programmable options. Contact SiTime for devices of your interest that are not covered here. Table 1. Field Programmable Devices - MEMS XO[1] Oscillator Product Family Field Programmable (FP) Part Number Package Size (mm x mm) Voltage (V) LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.0 x 1.6 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.5 x 2.0 SiT1602 SiT8008 LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8008BI-31-XXX-000.FP0000 LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8008BI-81-XXX-000.FP0000 LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 7.0 x 5.0 SiT8009BI-71-XXX-000.FP0000 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.0 x 1.6 SiT8009BI-11-XXX-000.FP0000 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.5 x 2.0 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8009BI-31-XXX-000.FP0000 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8009BI-81-XXX-000.FP0000 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 7.0 x 5.0 SiT8208AI-G1-XXX-000.FP0000 LVCMOS 1 to 80 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.5 x 2.0 SiT8009 LVCMOS 1 to 80 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8208AI-31-XXX-000.FP0000 LVCMOS 1 to 80 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8208AI-81-XXX-000.FP0000 LVCMOS 1 to 80 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 7.0 x 5.0 SiT8209AI-G1-XXX-000.FP0000 LVCMOS 80 to 220 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.5 x 2.0 SiT8209AI-21-XXX-000.FP0000 LVCMOS 80 to 220 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8209AI-31-XXX-000.FP0000 LVCMOS 80 to 220 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8209AI-81-XXX-000.FP0000 LVCMOS 80 to 220 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 7.0 x 5.0 SiT9121AI-1B1-XXX000.FP0000 LVPECL 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 3.2 x 2.5 LVPECL 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 LVPECL 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 7.0 x 5.0 LVDS 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 3.2 x 2.5 SiT9121AI-2C1-XXX000.FP0000 LVDS 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 SiT9121AI-2D1-XXX000.FP0000 LVDS 1 to 220 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 7.0 x 5.0 SiT9122AI-1B1-XXX000.FP0000 LVPECL 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 3.2 x 2.5 SiT9122AI-1C1-XXX000.FP0000 LVPECL 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 SiT8208 SiT8209 SiT9121AI-1C1-XXX000.FP0000 SiT9121AI-1D1-XXX000.FP0000 SiT9121AI-2B1-XXX000.FP0000 SiT9122AI-1D1-XXX000.FP0000 Rev. 1.4 Temp Range (C) LVCMOS SiT8208AI-21-XXX-000.FP0000 High Performance Differential Oscillator Frequency Stability (ppm) SiT8008BI-11-XXX-000.FP0000 SiT8009BI-21-XXX-000.FP0000 UltraPerformance Single-Ended Oscillator Frequency Range (MHz) SiT8008BI-71-XXX-000.FP0000 SiT8008BI-21-XXX-000.FP0000 Low Power Single-Ended Oscillator Supported Signaling Devices Type SiT9120, SiT9121 LVPECL 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 7.0 x 5.0 SiT9122AI-2B1-XXX000.FP0000 LVDS 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 3.2 x 2.5 SiT9122AI-2C1-XXX000.FP0000 LVDS 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 5.0 x 3.2 SiT9122AI-2D1-XXX000.FP0000 LVDS 220 to 625 20, 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 7.0 x 5.0 SiT9122 Page 2 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Table 1. Field Programmable Devices - MEMS XO[1] (continued) Oscillator Product Family Signaling Type Frequency Range (MHz) Frequency Stability (ppm) SiT8920BM-71-XXX-000.FP0000 LVCMOS 1 to 110 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.0 x 1.6 SiT8920BM-11-XXX-000.FP0000 LVCMOS 1 to 110 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.5 x 2.0 LVCMOS 1 to 110 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8920BM-31-XXX-000.FP0000 LVCMOS 1 to 110 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8920BM-81-XXX-000.FP0000 High Temperature Single-Ended Oscillator SiT8921BM-71-XXX-000.FP0000 LVCMOS 1 to 110 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 7.0 x 5.0 LVCMOS 115.194001 or 119.342001 to 137 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.0 x 1.6 SiT8921BM-11-XXX-000.FP0000 LVCMOS 115.194001 or 119.342001 to 137 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.5 x 2.0 LVCMOS 115.194001 or 119.342001 to 137 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8921BM-31-XXX-000.FP0000 LVCMOS 115.194001 or 119.342001 to 137 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8921BM-81-XXX-000.FP0000 LVCMOS 115.194001 or 119.342001 to 137 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 7.0 x 5.0 Field Programmable (FP) Part Number SiT8920BM-21-XXX-000.FP0000 SiT8921BM-21-XXX-000.FP0000 SiT8919, SiT8921 Voltage Package Size (V) (mm x mm) SiT2024 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 SiT2025BM-S1-XXX-000.FP0000 SiT2025 LVCMOS 115.20 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 SiT8924BM-71-XXX-000.FP0000 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.0 x 1.6 SiT8924BM-11-XXX-000.FP0000 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.5 x 2.0 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8924BM-31-XXX-000.FP0000 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8924BM-81-XXX-000.FP0000 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 7.0 x 5.0 SiT8925BM-71-XXX-000.FP0000 LVCMOS 115.20 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.0 x 1.6 SiT8925BM-11-XXX-000.FP0000 LVCMOS 115.20 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.5 x 2.0 LVCMOS 115.20 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 3.2 x 2.5 SiT8925BM-31-XXX-000.FP0000 LVCMOS 115.20 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 5.0 x 3.2 SiT8925BM-81-XXX-000.FP0000 LVCMOS 115.20 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 7.0 x 5.0 SiT8925BM-21-XXX-000.FP0000 Clock Generator Oscillator SiT1618, SiT8918, SiT8920 Temp Range (C) SiT2024BM-S1-XXX-000.FP0000 SiT8924BM-21-XXX-000.FP0000 AEC-Q100 Automotive Oscillator Supported Devices SiT8924 SiT8925 SiT2001BI-S1-XXX-000.FP0000 SiT2001 LVCMOS 1 to 110 20, 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 2.9 x 2.8 SiT2002BI-S1-XXX-000.FP0000 SiT2002 LVCMOS 115 to 137 20, 25, 50 -40 to 85, -20 to 70 2.9 x 2.8 SiT2020BM-S1-XXX-000.FP0000 SiT2018, SiT2020 LVCMOS 1 to 110 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 1.8V, 2.5-3.3V SiT2021BM-S1-XXX-000.FP0000 SiT2019, SiT2021 LVCMOS 115.194001 or 119.342001 to 137 20, 25, 30, 50 -40 to 105, -40 to 125, -55 to 125 1.8V, 2.5-3.3V 2.9 x 2.8 2.9 x 2.8 Note: 1. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to SiT8008B. Rev. 1.4 Page 3 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Table 2. Field Programmable Devices - MEMS VCXO[2] Oscillator Product Family Frequency Range (MHz) Frequency Stability (ppm) Temp Range (C) Voltage (V) Pull Range (ppm) Package Size (mm x mm) LVCMOS 1 to 80 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 2.5 x 2.0 LVCMOS 1 to 80 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 3.2 x 2.5 LVCMOS 1 to 80 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 5.0 x 3.2 LVCMOS 1 to 80 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 7.0 x 5.0 LVCMOS 80 to 220 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 2.5 x 2.0 LVCMOS 80 to 220 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 3.2 x 2.5 SiT3809AI-32-XXXX-000.FP0000 LVCMOS 80 to 220 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 5.0 x 3.2 SiT3809AI-82-XXXX-000.FP0000 LVCMOS 80 to 220 25, 50 -40 to 85, -20 to 70 1.8V, 2.5-3.3V 25 to 1600 7.0 x 5.0 SiT3821AI-1C2-XXXX000.FP0000 LVPECL 1 to 220 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 5.0 x 3.2 LVPECL 1 to 220 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 7.0 x 5.0 SiT3821AI-2C2-XXXX000.FP0000 LVDS 1 to 220 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 5.0 x 3.2 SiT3821AI-2D2-XXXX000.FP0000 LVDS 1 to 220 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 7.0 x 5.0 SiT3822AI-1C2-XXXX000.FP0000 LVPECL 220 to 625 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 5.0 x 3.2 LVPECL 220 to 625 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 7.0 x 5.0 SiT3822AI-2C2-XXXX000.FP0000 LVDS 220 to 625 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 5.0 x 3.2 SiT3822AI-2D2-XXXX000.FP0000 LVDS 220 to 625 25, 50 -40 to 85, -20 to 70 2.5V, 3.3V 25 to 1600 7.0 x 5.0 Field Programmable (FP) Part Number Supported Signaling Devices Type SiT3808AI-G2-XXXX-000.FP0000 SiT3808AI-22-XXXX-000.FP0000 SiT3808AI-32-XXXX-000.FP0000 SiT3807, SiT3808 High SiT3808AI-82-XXXX-000.FP0000 Performance Single-Ended SiT3809AI-G2-XXXX-000.FP0000 VCXO SiT3809AI-22-XXXX-000.FP0000 SiT3809 SiT3821AI-1D2-XXXX000.FP0000 SiT3821 High Performance Differential VCXO SiT3822AI-1D2-XXXX000.FP0000 SiT3822 Note: 2. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to SiT8008B. Rev. 1.4 Page 4 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Table 3. Field Programmable Devices - MEMS Spread Spectrum XO[3] Oscillator Product Family Field Programmable (FP) Part Number Supported Devices Signaling Type Frequency Frequency Range Stability (MHz) (ppm) Voltage (V) Spread Percentage Package Size (mm x mm) LVCMOS 1 to 200 50, 100 -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V LVCMOS 1 to 200 50, 100 -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V SiT9001AI-33-XXXX-000.FP000 LVCMOS 1 to 200 50, 100 -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V SiT9001AI-83-XXXX-000.FP000 LVCMOS 1 to 200 50, 100 -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V 7.0 x 5.0 SiT9003AI-13-33XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 2.5V, 2.8V, 3.3V 2.5 x 2.0 SiT9003AI-23-33XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 2.5V, 2.8V, 3.3V 3.2 x 2.5 SiT9003AI-33-33XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 2.5V, 2.8V, 3.3V 5.0 x 3.2 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 SiT9003AI-13-18XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 2.5V, 2.8V, 3.3V 0.25% to 0.5% -0.5% to -1% 1.8V SiT9003AI-23-18XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 1.8V 3.2 x 2.5 SiT9003AI-33-18XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 1.8V 5.0 x 3.2 SiT9003AI-83-18XX-000.FP000 LVCMOS 1 to 110 50, 100 -40 to 85, -20 to 70 1.8V 7.0 x 5.0 SiT9002AI-X32XXXXX000.FP000 LVPECL LVDS HCSL CML 1 to 220 -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V 5.0 x 3.2 SiT9001AI-13-XXXX-000.FP000 SiT9001AI-23-XXXX-000.FP000 SiT9001 Spread Spectrum Single-Ended Oscillator Temp Range (C) SiT9003AI-83-33XX-000.FP000 SiT9003 Spread Spectrum Differential Oscillator SiT9002 SiT9002AI-X82XXXXX000.FP000 LVPECL LVDS HCSL CML 1 to 220 -20 to 70: 25, 50 -40 to 85: 50 -20 to 70: 25, 50 -40 to 85: 50 2.5 x 2.0 0.25% to 1% -0.5% to -2% 3.2 x 2.5 5.0 x 3.2 7.0 x 5.0 2.5 x 2.0 0.25% to 2% -0.5% to -4% -40 to 85, -20 to 70 1.8V, 2.5V, 3.3V 7.0 x 5.0 Note: 3. Revision number which is placed right after SiTXXXX in the part number is fixed and not programmable. For instance, SiT8008A cannot be programed to SiT8008B. Rev. 1.4 Page 5 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Tape & Reel Options For example, the last letter ""G in the SiT8008AI-71-XXX000.FP0000G indicates 250 pieces of SiT8008AI FP devices shipped in 8 mm tape. FP devices are shipped with standard Tape & Reel options. An additional letter is affixed to the end of the FP device part numbers in Tables 1 to 3 to specify the tape size and the reel quantity. The complete list of T&R options for different device package sizes are shown in the table below. Table 4. Ordering Codes for Supported Tape & Reel Packing Method Supported FP Device: SiT8008, SiT8009, SiT8920, SiT8921, SiT8924, SiT8925 Tape & Reel Package Size 8 mm Tape 12 mm Tape 16 mm Tape 250 pcs reel 1ku reel 250 pcs reel 1ku reel 250 pcs reel 1ku reel 2.0 x 1.6 mmxmm G E - - - - 2.5 x 2.0 mmxmm G E - - - - 3.2 x 2.5 mmxmm G E - - - - 5.0 x 3.2 mmxmm - - X Y - - 7.0 x 5.0 mmxmm - - - - X Y Table 5. Ordering Codes for Supported Tape & Reel Packing Method Supported FP Device: SiT3808, SiT3809, SiT3821, SiT3822, SiT8208, SiT8209, SiT9001, SiT9002, SiT9003, SiT9121, SiT9122 Tape & Reel Package Size 12 mm Tape 16 mm Tape 250 pcs reel 1ku reel 250 pcs reel 1ku reel 2.5 x 2.0 mmxmm X Y - - 3.2 x 2.5 mmxmm X Y - - 5.0 x 3.2 mmxmm X Y - - 7.0 x 5.0 mmxmm - - X Y Table 6. Ordering Codes for Supported Tape & Reel Packing Method Supported FP Device: SiT2024, SiT2025, SiT9021, SiT2001, SiT2002, SiT2020 SiT2021 Tape & Reel Package Size 2.9 x 2.8 mmxmm Rev. 1.4 8mm Tape 250 pcs reel 1ku reel G E Page 6 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Time Machine II Programmer Kit FP devices are programmed with SiTime's oscillator programmer. Time Machine II is a complete programming kit. It comes with the programmer base unit and three socket cards, each of which accommodates two different oscillator package sizes. The ordering codes for the programming kit and the socket cards are shown in the table below. Note that earlier versions of the programming kit was shipped with the SiT6162DK socket card that accommodates 2.7 x 2.4 mmxmm (2.5 x 2.0 compatible) and 3.2 x 2.5 mmxmm 4-pin packages. The SiT6162DK has since been replaced with SiT6165DK, which supports the 2.9 x 2.8 mmxmm (SOT23-5) packages in addition to 3.2 x 2.5 mmxmm packages. Table 7. Programmer Kit Description and Ordering Codes Device Name Part Number Description Programming Kit SiT6100DK The complete kit that includes the programmer base (SiT61650DK) and three socket cards (SiT6160DK, SiT6161 and SiT6165). Programmer Base SiT6150DK The base programmer with no sockets. Programming Socket SiT6160DK 5.0x3.2 and 7.0x5.0 packages programming sockets to program all 6-in and 4-pin field programmable devices. Programming Socket SiT6161DK 2.0x1.6 and 2.5x2.0 packages programming sockets to program all 6-in and 4-pin field programmable devices. SiT6165DK 3.2x2.5 package programming sockets to program all 6-in and 4-pin field programmable devices. 2.9x2.8 (SOT23-5) package supports 5-pin field programmable devices Programming Socket Rev. 1.4 Page 7 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Socket Card Selection for Programming Each socket card for the Time Machine II programmer comes with two sockets, each of which accommodates a particular package size. In addition, some sockets are designed to work with 4-pin devices only whereas other sockets can accommodate both 4-pin and 6-pin devices. Table below shows how to select the proper socket card for the desired FP device package size. Note that the package sizes are also printed right next to the sockets on the socket cards for visual identification during device programming. Table 8. Supported Packages Package Size 2.0 x 1.6 (4-pin) Socket to use Supported Field Programmable Devices 2.5 x 2.0 (4-pin) SiT6161DK SiT8008 SiT8009 SiT8920 SiT8921 SiT8924 SiT8925 SiT8008 SiT8009 SiT8920 SiT8921 SiT8924 SiT8925 SiT9001 SiT9003 2.9 x 2.8 (5-pin) 3.2 x 2.5 (4-pin & 6-pin) 5.0 x 3.2 (4-pin & 6-pin) SiT6165DK SiT2024 SiT2025 SiT9201 SiT2001 SiT2002 SiT2020 SiT2021 SiT8008 SiT8009 SiT8208 SiT8209 SiT8920 SiT8921 SiT8924 SiT8925 SiT3808 SiT3809 SiT9121 SiT9122 SiT9001 SiT9003 7.0 x 5.0 (4-pin & 6-pin) SiT6160DK SiT8008 SiT8009 SiT8208 SiT8209 SiT8920 SiT8921 SiT8924 SiT8925 SiT3808 SiT3809 SiT9121 SiT9122 SiT3821 SiT3822 SiT9001 SiT9002 SiT8008 SiT8009 SiT8208 SiT8209 SiT8920 SiT8921 SiT8924 SiT8925 SiT3808 SiT3809 SiT9121 SiT9122 SiT3821 SiT3822 SiT9001 SiT9002 SiT9003 SiT9003 Revision History Table 9. Datasheet Version and Change Log Revision Release Date 0.8 4/1/13 Change Summary 1.0 2/27/14 * * * Added more field programmer devices Updated Time Machine Socket Card information Formatted enhancement 1.01 3/12/14 * Corrected the ordering code for High Temperature, Single-Ended devices 1.1 3/30/15 * * Updated revision from A to B for SiT8008/8009/8920/8921 Corrected frequency stability of SiT9002 1.2 7/21/15 * * * * Added supports for AEC-Q100 automotive products;SiT2024, SiT2025, SiT8924,SiT8925 Added supports for clock generators products;SiT9201, 2001, 2002, SiT2018, SiT2019, SiT2020, SiT2021 Corrected frequency range and frequency stability of the high temperature products (SiT8920/SiT8921) in Table.1 Updated the part number of the program kits in Table.6 1.3 9/15/15 * * * Added 25 ppm frequency stability option to AEC-Q100 family Revised spread percentage of SiT9001 Added 2.8 V voltage option to SiT9003 1.4 3/14/16 * Corrected and added one more "0" at the end of all part numbers except for SiT900x" First release Disclaimer: This document is not an official SiTime datasheet. It is exported from a Master FrameMaker document for your convenience, to simplify the generation of your datasheet. The information in the official SiTime datasheet on SiTime's website will be the final reference in case of conflicting information. Rev. 1.4 Page 8 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Silicon MEMS Outperforms Quartz Best Reliability Best Electro Magnetic Susceptibility (EMS) Silicon is inherently more reliable than quartz. Unlike quartz suppliers, SiTime has in-house MEMS and analog CMOS expertise, which allows SiTime to develop the most reliable products. Figure 1 shows a comparison with quartz technology. Why is EpiSealTM MEMS Best in Class: SiTime's oscillators in plastic packages are up to 54 times more immune to external electromagnetic fields than quartz oscillators as shown in Figure 3. Why is EpiSeal MEMS Best in Class: * * Internal differential architecture for best common mode noise rejection * Electrostatically driven MEMS resonator is more immune to EMS SiTime's MEMS resonators are vacuum sealed using an advanced EpiSealTM process, which eliminates foreign particles and improves long term aging and reliability World-class MEMS and CMOS design expertise * TXC EpiSeal MEMS IDT Vibration Sensitivity (ppb/g) Reliability (Million Hours) 1,140 38 CW KYCA SLAB EpiSeal MEMS 10.0 1.0 0.1 0.0 10 EPSN EPS 100.0 100 1000 Vibration Frequency (Hz) 28 Figure 3. Electro Magnetic Susceptibility (EMS)[3] [1] Figure 1. Reliability Comparison Best Power Supply Noise Rejection Best Aging Unlike quartz, MEMS oscillators have excellent long term aging performance which is why every new SiTime product specifies 10-year aging. A comparison is shown in Figure 2. Why is EpiSeal MEMS Best in Class: * SiTime's MEMS resonators are vacuum sealed using an advanced EpiSeal process, which eliminates foreign particles and improves long term aging and reliability * Inherently better immunity of electrostatically driven MEMS resonator SiTime's MEMS oscillators are more resilient against noise on the power supply. A comparison is shown in Figure 4. Why is EpiSeal MEMS Best in Class: * * On-chip regulators and internal differential architecture for common mode noise rejection MEMS resonator is paired with advanced analog CMOS IC MEMS vs. Quartz Aging EpiSeal MEMS Oscillator Quartz Oscillator 10 8 Aging ( PPM) 8 6 4 2 3 3.5 Figure 4. Power Supply Noise Rejection[4] 1.5 0 1-Year 10-Year Figure 2. Aging Comparison[2] Rev. 1.4 Page 9 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Best Vibration Robustness Best Shock Robustness High-vibration environments are all around us. All electronics, from handheld devices to enterprise servers and storage systems are subject to vibration. Figure 5 shows a comparison of vibration robustness. SiTime's oscillators can withstand at least 50,000 g shock. They all maintain their electrical performance in operation during shock events. A comparison with quartz devices is shown in Figure 6. Why is EpiSeal MEMS Best in Class: Why is EpiSeal MEMS Best in Class: * The moving mass of SiTime's MEMS resonators is up to 3000 times smaller than quartz * * The moving mass of SiTime's MEMS resonators is up to 3000 times smaller than quartz Center-anchored MEMS resonator is the most robust design * Center-anchored MEMS resonator is the most robust design Figure 5. Vibration Robustness[5] Figure 6. Shock Robustness[6] Figure labels: TXC = TXC Epson = EPSN Connor Winfield = CW Kyocera = KYCA SiLabs = SLAB SiTime = EpiSeal MEMS Rev. 1.4 Page 10 of 11 www.sitime.com Field Programmable Oscillator The Smart Timing Choice Notes: 1. Data source: Reliability documents of named companies. 2. Data source: SiTime and quartz oscillator devices datasheets. 3. Test conditions for Electro Magnetic Susceptibility (EMS): * According to IEC EN61000-4.3 (Electromagnetic compatibility standard) * Field strength: 3V/m * Radiated signal modulation: AM 1 kHz at 80% depth * Carrier frequency scan: 80 MHz - 1 GHz in 1% steps * Antenna polarization: Vertical * DUT position: Center aligned to antenna Devices used in this test: Label Manufacturer Part Number Technology EpiSeal MEMS SiTime SiT9120AC-1D2-33E156.250000 MEMS + PLL EPSN Epson EG-2102CA156.2500M-PHPAL3 Quartz, SAW TXC TXC BB-156.250MBE-T Quartz, 3rd Overtone CW Conner Winfield P123-156.25M Quartz, 3rd Overtone KYCA AVX Kyocera KC7050T156.250P30E00 Quartz, SAW SLAB SiLab 590AB-BDG Quartz, 3rd Overtone + PLL Part Number Technology 4. 50 mV pk-pk Sinusoidal voltage. Devices used in this test: Label Manufacturer EpiSeal MEMS SiTime SiT8208AI-33-33E-25.000000 MEMS + PLL NDK NDK NZ2523SB-25.6M Quartz KYCA AVX Kyocera KC2016B25M0C1GE00 Quartz EPSN Epson SG-310SCF-25M0-MB3 Quartz 5. Devices used in this test: same as EMS test stated in Note 3. 6. Test conditions for shock test: * MIL-STD-883F Method 2002 * Condition A: half sine wave shock pulse, 500-g, 1ms * Continuous frequency measurement in 100 s gate time for 10 seconds Devices used in this test: same as EMS test stated in Note 3. 7. Additional data, including setup and detailed results, is available upon request to qualified customer. Disclaimer: This document is not an official SiTime datasheet. It is exported from a Master FrameMaker document for your convenience, to simplify the generation of your datasheet. The information in the official SiTime datasheet on SiTime's website will be the final reference in case of conflicting information. (c) SiTime Corporation 2016. The information contained herein is subject to change at any time without notice. SiTime assumes no responsibility or liability for any loss, damage or defect of a Product which is caused in whole or in part by (i) use of any circuitry other than circuitry embodied in a SiTime product, (ii) misuse or abuse including static discharge, neglect or accident, (iii) unauthorized modification or repairs which have been soldered or altered during assembly and are not capable of being tested by SiTime under its normal test conditions, or (iv) improper installation, storage, handling, warehousing or transportation, or (v) being subjected to unusual physical, thermal, or electrical stress. Disclaimer: SiTime makes no warranty of any kind, express or implied, with regard to this material, and specifically disclaims any and all express or implied warranties, either in fact or by operation of law, statutory or otherwise, including the implied warranties of merchantability and fitness for use or a particular purpose, and any implied warranty arising from course of dealing or usage of trade, as well as any common-law duties relating to accuracy or lack of negligence, with respect to this material, any SiTime product and any product documentation. Products sold by SiTime are not suitable or intended to be used in a life support application or component, to operate nuclear facilities, or in other mission critical applications where human life may be involved or at stake. All sales are made conditioned upon compliance with the critical uses policy set forth below. CRITICAL USE EXCLUSION POLICY BUYER AGREES NOT TO USE SITIME'S PRODUCTS FOR ANY APPLICATION OR IN ANY COMPONENTS USED IN LIFE SUPPORT DEVICES OR TO OPERATE NUCLEAR FACILITIES OR FOR USE IN OTHER MISSION-CRITICAL APPLICATIONS OR COMPONENTS WHERE HUMAN LIFE OR PROPERTY MAY BE AT STAKE. SiTime owns all rights, title and interest to the intellectual property related to SiTime's products, including any software, firmware, copyright, patent, or trademark. The sale of SiTime products does not convey or imply any license under patent or other rights. SiTime retains the copyright and trademark rights in all documents, catalogs and plans supplied pursuant to or ancillary to the sale of products or services by SiTime. Unless otherwise agreed to in writing by SiTime, any reproduction, modification, translation, compilation, or representation of this material shall be strictly prohibited. Rev. 1.4 Page 11 of 11 www.sitime.com Document Feedback Form The Smart Timing Choice The Smart Timing Choice SiTime values your input in improving our documentation. Click here for our online feedback form or fill out and email the form below to productsupport@sitime.com. 1. Does the Electrical Characteristics table provide complete information? Yes No If No, what parameters are missing? _________________________________________________________________________________________________ 2. Is the organization of this document easy to follow? Yes No If "No," please suggest improvements that we can make: _________________________________________________________________________________________________ 3. Is there any application specific information that you would like to see in this document? (Check all that apply) EMI Termination recommendations Shock and vibration performance Other If "Other," please specify: _________________________________________________________________________________________________ 4. Are there any errors in this document? Yes No If "Yes", please specify (what and where): _________________________________________________________________________________________________ 5. Do you have additional recommendations for this document? _________________________________________________________________________________________________ Name ________________________________________________________________________________ Title ________________________________________________________________________________ Company _________________________________________________________________________________________ Address _________________________________________________________________________________________ City / State or Province / Postal Code / Country ___________________________________________________________ Telephone __________________________________ Application ________________________________________________________________________________________ Would you like a reply? Yes No Thank you for your feedback. Please click the email icon in your Adobe Reader tool bar and send to productsupport@sitime.com. Or you may use our online feedback form. Feedback Form Rev. 1.0 www.sitime.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: SiTime: SIT3808AI-C2-33EB27.000000 SiT9121AI-2C2-XXX000.FP000 SiT8208AI-31-XXX-000.FP0000 SiT9122AI-2D2XXX000.FP000 SiT9121AI-1C2-XXX000.FP000 SiT8208AI-21-XXX-000.FP0000 SiT8209AI-31-XXX-000.FP0000 SiT9122AI-1D2-XXX000.FP000 SiT9001AI-83-XXXX-000.FP000 SiT9003AI-13-18XX-000.FP000 SiT9001AI-33-XXXX000.FP000 SiT9003AI-33-18XX-000.FP000 SiT9122A-2C2-XXX000.FP000 SiT9003AI-83-18XX-000.FP000 SiT8208AI-81-XXX-000.FP0000 SiT9121AI-1D2-XXX000.FP000 SiT9122AI-1C2-XXX000.FP000 SiT8209AI-G1-XXX000.FP0000 SiT9003AI-23-18XX-000.FP000 SiT8209AI-21-XXX-000.FP0000 SiT9001AI-13-XXXX-000.FP000 SiT9001AI-23-XXXX-000.FP000 SiT8209AI-81-XXX-000.FP0000 SiT8208AI-G1-XXX-000.FP0000 SiT9121AI-2D2XXX000.FP000 SiT8008AC-33-18E-33.333330 SIT3808AI-CF-33NB-50.000000X