Doc #97033 DATA DELAY DEVICES, INC. 1
12/10/97 3 Mt. Prospect Ave. Clifton, NJ 07013
5-TAP, TTL-INTERFACED
FIXED DELAY LINE
(SERIES DDU4F)
FEATURES PACKAGES
• Five equally spaced outputs
• Fits standard 14-pin DIP socket
• Low profile
• Auto-insertable
• Input & outputs fully TTL interfaced & buffered
• 10 T2L fan-out capability
FUNCTIONAL DESCRIPTION
The DDU4F-series device is a 5-tap digitally buffered delay line. The
signal input (IN) is reproduced at the outputs (T1-T5), shifted in time by an
amount determined by the device dash number (See Table). For dash
numbers less than 5025, the total delay of the line is measured from T1 to
T5. The nominal tap-to-tap delay increment is given by one-fourth of the
total delay, and the inherent delay from IN to T1 is nominally 3.5ns. For
dash numbers greater than or equal to 5025, the total delay of the line is measured from IN to T5. The
nominal tap-to-tap delay increment is given by one-fifth of this number.
SERIES SPECIFICATIONS
• Minimum input pulse width: 20% of total delay
• Output rise time: 2ns typical
• Supply voltage: 5VDC ± 5%
• Supply current: ICCL = 32ma typical
ICCH = 7ma typical
• Operating temperature: 0° to 70° C
• Temp. coefficient of total delay: 100 PPM/°C
25% 25% 25% 25%
VCC GNDIN T1 T2 T3 T4 T5
Functional diagram for dash numbers < 5025
3.5ns
20% 20% 20% 20% 20%
VCC GNDIN T1 T2 T3 T4 T5
Functional diagram for dash numbers >= 5025
1997 Data Delay Devices
delay
devices, inc.
2
3
4
5
6
7
13
12
11
10
9
8
N/C
N/C
T2
N/C
T4
GND
N/C
T1
N/C
T3
N/C
T5
14
12
10
8
1
4
6
7
IN
T2
T4
GND
VCC
T1
T3
T5
DDU4F-xx DIP
DDU4F-xxA2 Gull-Wing
DDU4F-xxB2 J-Lead
DDU4F-xxM Military DIP
Military SMD
DDU4F-xxMC2
PIN DESCRIPTIONS
IN Signal Input
T1-T5 Tap Outputs
VCC +5 Volts
GND Ground
DASH NUMBER SPECIFICATIONS
Part
Number Total
Delay (ns) Delay Per
Tap (ns)
DDU4F-5004 4 ± 1.0 * 1.0 ± 0.5
DDU4F-5006 6 ± 1.0 * 1.5 ± 0.5
DDU4F-5008 8 ± 2.0 * 2.0 ± 1.0
DDU4F-5010 10 ± 2.0 * 2.5 ± 1.0
DDU4F-5012 12 ± 2.0 * 3.0 ± 1.0
DDU4F-5016 16 ± 2.0 * 4.0 ± 1.5
DDU4F-5020 20 ± 3.0 * 5.0 ± 2.0
DDU4F-5025 25 ± 3.0 5.0 ± 2.0
DDU4F-5030 30 ± 3.0 6.0 ± 2.0
DDU4F-5040 40 ± 3.0 8.0 ± 2.0
DDU4F-5050 50 ± 3.0 10.0 ± 3.0
DDU4F-5060 60 ± 3.0 12.0 ± 3.0
DDU4F-5075 75 ± 4.0 15.0 ± 3.0
DDU4F-5100 100 ± 5.0 20.0 ± 3.0
DDU4F-5125 125 ± 6.5 25.0 ± 3.0
DDU4F-5150 150 ± 7.5 30.0 ± 3.0
DDU4F-5200 200 ± 10.0 40.0 ± 4.0
DDU4F-5250 250 ± 12.5 50.0 ± 5.0
DDU4F-5300 300 ± 15.0 60.0 ± 6.0
DDU4F-5400 400 ± 20.0 80.0 ± 8.0
DDU4F-5500 500 ± 25.0 100.0 ± 10.0
* Total delay is referenced to first tap output
Input to first tap = 3.5ns ±± 1ns
NOTE: Any dash number between 5004 and 5500
not shown is also available.