UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 CURRENT MODE PWM CONTROLLER FEATURES * * * * * * * * * * * DESCRIPTION Optimized For Off-line and DC-to-DC Converters Low Start-Up Current (<1 mA) Automatic Feed Forward Compensation Pulse-by-Pulse Current Limiting Enhanced Load Response Characteristics Under-Voltage Lockout With Hysteresis Double Pulse Suppression High Current Totem Pole Output Internally Trimmed Bandgap Reference 500-kHz Operation Low RO Error Amp The UC1842/3/4/5 family of control devices provides the necessary features to implement off-line or dc-to-dc fixed frequency current mode control schemes with a minimal external parts count. Internally implemented circuits include under-voltage lockout featuring start up current less than 1 mA, a precision reference trimmed for accuracy at the error amp input, logic to insure latched operation, a PWM comparator which also provides current limit control, and a totem pole output stage designed to source or sink high peak current. The output stage, suitable for driving N-Channel MOSFETs, is low in the off state. Differences between members of this family are the under-voltage lockout thresholds and maximum duty cycle ranges. The UC1842 and UC1844 have UVLO thresholds of 16 VON and 10 VOFF, ideally suited to off-line applications. The corresponding thresholds for the UC1843 and UC1845 are 8.4 V and 7.6 V. The UC1842 and UC1843 can operate to duty cycles approaching 100%. A range of zero to 50% is obtained by the UC1844 and UC1845 by the addition of an internal toggle flip flop which blanks the output off every other clock cycle. BLOCK DIAGRAM Vcc 7 12 UVLO 34 V S/R GROUND 5 9 5V REF 8 14 VREF 5V 50 mA 2.50 V Internal BIAS VREF Good Logic 4 7 RT/CT OSC Error Amp VFB 2 COMP 1 CURRENT SENSE 3 7 11 VC 3 1 6 10 OUTPUT T S 2R R R 1V CURRENT SENSE COMPARATOR PWM LATCH 5 8 POWER GROUND 5 Note 1: A/B A = DIL-8 Pin Number. B = SO-14 and CFP-14 Pin Number. Note 2: Toggle flip flop used only in 1844 and 1845. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1997-2007, Texas Instruments Incorporated UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 ABSOLUTE MAXIMUM RATINGS (1) UNIT Low impedance source Supply voltage 30 V ICC < 30 mA Self Limiting 1 A Output current 5 J Output energy (capacitive load) Analog inputs (Pins 2, 3) -0.3 V to 6.3 V Error amp output sink current 10 mA TA 25C (DIL-8) 1W TA 25C (SOIC-14) Power dissipation 725 mW TA 25C (SOIC-8) 650 mW Storage temperature range -65C to 150C Junction temperature range -55C to 150C Lead temperature (soldering, 10 seconds) (1) 300C All voltages are with respect to Pin 5. All currents are positive into the specified terminal. Consult Packaging Section of Databook for thermal limitations and considerations of packages. CONNECTION DIAGRAMS DIL-8, SOIC-8 N or J PACKAGE, D8 PACKAGE (TOP VIEW) 7 3 6 4 5 VREF VCC OUTPUT GROUND SOIC-14, CFP-14 D or W PACKAGE (TOP VIEW) COMP NC VFB NC ISENSE NC RT/CT 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VREF NC VCC VC OUTPUT GROUND PWR GND 3 2 1 20 19 NC VFB NC 4 18 5 6 17 16 ISENSE NC 7 15 14 8 NC - No internal connection 2 NC 8 2 NC COMP NC VREF 1 Submit Documentation Feedback 9 10 11 12 13 NC RT / CT NC PWR GND GROUND COMP VFB ISENSE RT/CT PLCC-20 Q PACKAGE (TOP VIEW) VCC VC NC OUTPUT NC UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 THERMAL CHARACTERISTICS over operating free-air temperature range (unless otherwise noted) JC JA J 28 (1) 125-160 N 25 110 (2) SOIC-8 D8 42 84-160 (2) SOIC-14 D14 35 50-120 (2) CFP-14 W 5.49C/W 175.4C/W PLCC-20 Q 34 43-75 (2) PACKAGE DIL-8 (1) (2) JC data values stated were derived from MIL-STD-1835B. Specified JA (junction to ambient) is for devices mounted to 5 in2 FR4 PC board with one ounce copper where noted. When resistance range is given, lower values are for 5 in2. Test PWB was 0.062 in thick and typically used 0.635-mm trace widths for power packages and 1.3-mm trace widths for non-power packages with 100 x 100-mil probe land area at the end of each trace. DISSIPATION RATINGS PACKAGE TA 25C POWER RATING DERATING FACTOR ABOVE TA 25C TA 70C POWER RATING TA 85CPO WER RATING TA 125C POWER RATING W 700 mW 5.5 mW/C 452 mW 370 mW 150 mW ELECTRICAL CHARACTERISTICS Unless otherwise stated, these specifications apply for -55C TA 125C for the UC184X; -40C TA 85C for the UC284X; 0C TA 70C for the 384X; VCC = 15 V (1); RT = 10 k; CT = 3.3 nF, TA = TJ. PARAMETER TEST CONDITIONS UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 UNIT MIN TYP MAX MIN TYP MAX 4.95 4.90 REFERENCE SECTION Output Voltage TJ = 25C, IO = 1 mA 5.00 5.05 5.00 5.10 Line Regulation 12 VIN 25 V 6 20 6 20 Load Regulation 1 I0 20 mA 6 25 6 25 Temp. Stability See 0.2 0.4 Total Output Variation Line, load, tempature Output Noise Voltage 10 Hz f 10 kHz, TJ = Long Term Stability TA = 125C, 1000 Hrs (2) (2) (3) (2) Output Short Circuit 4.9 25C (2) 5.1 0.2 4.82 50 -30 25 -100 -180 -30 52 57 47 0.2% 1% mV 0.4 mV/C 5.18 V V 50 5 V 5 25 mV -100 -180 mA 52 57 kHz 0.2% 1% OSCILLATOR SECTION Initial Accuracy TJ = 25C (4) Voltage Stability 12 VCC 25 V Temp. Stability TMIN TA TMAX (2) Amplitude (1) (2) (3) (4) 47 VPIN 4 peak-to-peak (2) 5% 5% 1.7 1.7 V Adjust VCC above the start threshold before setting at 15 V. These parameters, although specified, are not 100% tested in production. Temperature stability, sometimes referred to as average temperature coefficient, is described by the equation: V (max) * VREF (min) Temp Stability + REF TJ(max) * TJ (min) VREF(max) and VREF(min) are the maximum and minimum reference voltages measured over the appropriate temperature range. Note that the extremes in voltage do not necessarily occur at the extremes in temperature. Output frequency equals oscillator frequency for the UC1842 and UC1843. Output frequency is one half oscillator frequency for the UC1844 and UC1845. Submit Documentation Feedback 3 UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 ELECTRICAL CHARACTERISTICS (continued) Unless otherwise stated, these specifications apply for -55C TA 125C for the UC184X; -40C TA 85C for the UC284X; 0C TA 70C for the 384X; VCC = 15 V; RT = 10 k; CT = 3.3 nF, TA = TJ. PARAMETER TEST CONDITIONS UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 UNIT MIN TYP MAX MIN TYP MAX 2.45 2.50 2.55 2.42 2.50 2.58 V -0.3 -1 -0.3 -2 A ERROR AMP SECTION Input Voltage VPIN 1 = 2.5 V Input Bias Current AVOL 2 VO 4 V Unity Gain Bandwidth TJ = 25C PSRR 12 VCC 25 V Output Sink Current VPIN 2 = 2.7 V, VPIN 1 = 1.1 V Output Source Current VPIN 2 = 2.3 V, VPIN 1 = 5 V VOUT High VPIN 2 = 2.3 V, RL = 15 k to ground VOUT Low VPIN 2 = 2.7 V, RL = 15 k to Pin 8 Gain See (6) (7) Maximum Input Signal VPIN 1= 5V PSRR 12 VCC 25 V (5) 65 90 65 90 dB 0.7 1 0.7 1 MHz 60 70 60 70 dB 2 6 2 6 -0.5 -0.8 -0.5 -0.8 5 6 5 6 0.7 1.1 2.85 3 3.15 0.9 1 1.1 mA V 0.7 1.1 2.85 3 3.15 V/V 0.9 1 1.1 V CURRENT SENSE SECTION (6) (5) (6) 70 Delay to Output 70 dB -2 -10 -2 -10 A 150 300 150 300 ns ISINK = 20 mA 0.1 0.4 0.1 0.4 ISINK = 200 mA 1.5 2.2 1.5 2.2 Input Bias Current VPIN 3 = 0 V to 2 V (5) OUTPUT SECTION Output Low Level Output High Level ISOURCE = 20 mA ISOURCE = 200 mA 13 13.5 12 13.5 (5) Rise Time TJ = 25C, CL = 1 nF Fall Time TJ = 25C, CL = 1nF (5) 13 13.5 12 13.5 50 150 50 150 50 150 50 150 V ns UNDER-VOLTAGE LOCKOUT SECTION Start Threshold Min. Operating Voltage After Turn On X842/4 15 16 17 14.5 16 17.5 X843/5 7.8 8.4 9.0 7.8 8.4 9.0 X842/4 9 10 11 8.5 10 11.5 X843/5 7.0 7.6 8.2 7.0 7.6 8.2 X842/3 95% 97% 100% 95% 97% 100% X844/5 46% 48% 50% 47% 48% 50% V PWM SECTION Maximum Duty Cycle Minimum Duty Cycle 0% 0% TOTAL STANDBY CURRENT Start-Up Current Operating Supply Current VPIN 2 = VPIN 3 = 0 V VCC Zener Voltager ICC = 25 mA (5) (6) (7) 4 30 These parameters, although specified, are not 100% tested in production. Parameter measured at trip point of latch with VPIN 2 = 0. A + DVPIN 1 , 0 v VPIN 3 v 0.8 V DVPIN 3 Gain defined as: Submit Documentation Feedback 0.5 1 0.5 1 11 17 11 17 34 30 34 mA V UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 ERROR AMP CONFIGURATION Error amp can source or sink up to 0.5 mA. 2.5 V 0.5 mA + VFB ZI _ 2 COMP ZF 1 UNDER-VOLTAGE LOCKOUT During under-voltage lock-out, the output drive is biased to sink minor amounts of current. Pin 6 should be shunted to ground with a bleeder resistor to prevent activating the power switch with extraneous leakage currents. VCC VCC 7 ON/OFF Command to REST of IC UC1842 UC1844 UC1843 UC1845 VON 16 V 8.4 V VOFF 10 V 7.6 V <17 mA <1 mA VCC VOFF VON CURRENT SENSE CIRCUIT A small RC filter may be required to suppress switch transients. ERROR AMP 2R IS R 1 R 3 RS COMP CURRENT SENSE 1V CURRENT SENSE COMPARATOR C GND 5 5 Peak Current (IS) is Determined By The Formula ,1.0 V ISMAX RS Submit Documentation Feedback 5 UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 OSCILLATOR SECTION 8 30 4 CT GROUND 100 10 t d - ms RT/CT Timing Resistance vs Frequency Deadtime vs CT (RT >5 kW) RT RT - (k W) VREF 3 5 1 0.3 1 2.2 4.7 1.72 For RT> 5 K f ~ RTCT 10 22 CT - nF 47 30 10 3 100 100 1k OUTPUT SATURATION CHARACTERISTICS 4 VCC = 15 V Saturation Voltage - V 3 TA = 25C TA = -55C 2 SOURCE SAT (VCC - VOH) 1 SINK SAT (VOL) 0 .01 .02 .03 .04 .05 .07 .1 .2 .3 .4 .5 .7 1 Output Current, Source or Sink - A 80 0 60 -45 40 -90 20 -135 Av -180 0 100 1k 10 k 100 k 1M f - Frequency - Hz 6 Submit Documentation Feedback 10 M Phase Margin - Voltage Gain - dB ERROR AMPLIFIER OPEN-LOOP FREQUENCY RESPONSE 10 10 k 100 k f - Frequency - Hz 1M UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 OPEN-LOOP LABORATORY FIXTURE High peak currents associated with capacitive loads necessitate careful grounding techniques. Timing and bypas capacitors should be conected close to pin 5 in a single point ground. The transistor and 5k potentiometer are used to sample the oscillator waveform and apply an adjustable ramp to pin 3. VREF R1 2N2222 4.7 kW 100 kW 1 kW ERROR AMP ADJUST 5 kW 4.7 kW ISENSE ADJUST A UC1842 1 COMP 2 VFB 3 ISENSE OUTPUT 6 4 RT / CT GROUND 5 VREF 8 VCC 0.1 mF VCC 7 0.1 mF 1 kW 1 W OUTPUT GROUND CT SHUTDOWN TECHNIQUES Shutdown of the UC1842 can be accomplished by two methods; either raise pin 3 above 1 V or pull pin 1 below a voltage two diode drops above ground. Either method causses the output of the PWM comparator to be high (refer to block diagram). The PWM latch is reset dominant so that the output will remain low until the next clock cycle after the shutdown condition at pin 1 and/or 3 is removed. In one example, an externally latched shutdown may be accomplished by adding an SCR which will be reset by cycling VCC below the lower UVLO threshold. At this pint the reference turns off, allowing the SCR to reset. 1 kW 8 VREF 3 ISENSE 1 COMP SHUTDOWN 330 W 500 W SHUTDOWN To Current SENSE RESISTOR Submit Documentation Feedback 7 UC1842/3/4/5 UC2842/3/4/5 UC3842/3/4/5 www.ti.com SLUS223C - APRIL 1997 - REVISED JUNE 2007 OFFLINE FLYBACK REGULATOR T1 R1 51W 117 VAC D6 U9D946 L1 +6 V VARO VM 68 C9 3300 pF 600 V R12 4.7 k 2W C1 250 F 250 V R2 56 k 2W N5 NP C10 4700 F 10 V C11 4700 F 10 V COM D4 1N3613 D7 UF81002 +12 V R4 4.7 k D2 1N3612 R3 20 k D3 1N3612 C12 2200 F 16 V N12 N12 2 C2 100 F 25 V 7 R5 150 k R9 68 3W C3 22 F C4 47 F 25 V -12 V NC D8 UES1002 1 C14 UC3844 R7 22 100 pF 8 Q1 UFN833 6 R8 R6 10 k C5 0.01 F 12 V COM C13 2200 F 16 V C8 680 pF 600 V 3 4 5 1 k USD1120 R13 20 k C7 470 pF C6 0.0022 F R10 0.55 1W D8 1N3613 R11 2.7 k 2W Power Supply Specifications 1. Input Voltages a. 5VAC to 130VA (50 Hz/60 Hz) 2. Line Isolation: 3750 V 3. Switchng Frequency: 40 kHz 4. Efficiency at Full Load 70% 5. Output Voltage: a. +5 V, 5%; 1A to 4A load Ripple voltage: 50 mV P-P Max b. +12 V, 3%; 0.1A to 0.3A load Ripple voltage: 100 mV P-P Max c. -12 V, 3%; 0.1A to 0.3A load Ripple voltage: 100 mV P-P Max SLOPE COMPENSATION A fraction of the oscillator ramp can be resistively summed with the current sense signal to provide slope compensation for converters requiring duty cycles over 50%. VREF 8 0.1 mF RT / CT RT 4 CT UC1842/3 ISENSE ISENSE R1 R2 3 C 8 Submit Documentation Feedback RSENSE PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Samples (Requires Login) 5962-8670401PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI 5962-8670401XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8670402PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI 5962-8670402XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8670403PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI 5962-8670403XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI 5962-8670404DA ACTIVE CFP W 14 1 TBD Call TI Call TI 5962-8670404PA ACTIVE CDIP JG 8 1 TBD Call TI Call TI 5962-8670404XA ACTIVE LCCC FK 20 1 TBD Call TI Call TI UC1842J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type A42 N / A for Pkg Type UC1842J883B ACTIVE CDIP JG 8 1 TBD UC1842L883B ACTIVE LCCC FK 20 1 TBD UC1842W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type POST-PLATE N / A for Pkg Type UC1843J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type UC1843J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type UC1843L ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type UC1843L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type UC1843W ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type UC1844J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type UC1844J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type UC1844L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type UC1845J ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type UC1845J883B ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type UC1845L ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type UC1845L883B ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type UC1845W ACTIVE CFP W 14 1 TBD UC1845W883B ACTIVE CFP W 14 1 TBD UC2842D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) Addendum-Page 1 (3) A42 N / A for Pkg Type A42 N / A for Pkg Type CU NIPDAU Level-1-260C-UNLIM PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2842J OBSOLETE CDIP JG 8 UC2842N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2842NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2843D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2843J OBSOLETE CDIP JG 8 TBD Addendum-Page 2 Call TI Call TI Samples (Requires Login) UC2842D8 TBD (3) Call TI Call TI PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp UC2843N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2843NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2844D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2844N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2844NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2845D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 3 (3) Samples (Requires Login) PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC2845J OBSOLETE CDIP JG 8 UC2845N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC2845NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3842D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3842N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3842NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3843D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 4 Call TI Samples (Requires Login) UC2845DTR TBD (3) Call TI PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3843N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3843NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3843QTR OBSOLETE PLCC FN 20 UC3844D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3844N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3844NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3845AJ ACTIVE CDIP JG 8 1 TBD Addendum-Page 5 Call TI A42 Samples (Requires Login) UC3843D8TR TBD (3) Call TI N / A for Pkg Type PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp UC3845D ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845D8 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845D8G4 ACTIVE SOIC D 8 75 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845D8TR ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845D8TRG4 ACTIVE SOIC D 8 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845DG4 ACTIVE SOIC D 14 50 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845DTR ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845DTRG4 ACTIVE SOIC D 14 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM UC3845N ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type UC3845NG4 ACTIVE PDIP P 8 50 Green (RoHS & no Sb/Br) CU NIPDAU N / A for Pkg Type (3) Samples (Requires Login) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) Addendum-Page 6 PACKAGE OPTION ADDENDUM www.ti.com (3) 5-Sep-2011 MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF UC1842, UC1843, UC1844, UC1845, UC3842, UC3843, UC3844, UC3845, UC3845AM : * Catalog: UC3842, UC3843, UC3844, UC3845, UC3842M, UC3845A * Military: UC1842, UC1843, UC1844, UC1845 * Space: UC1842-SP, UC1843-SP, UC1844-SP, UC1845-SP NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Military - QML certified for Military and Defense Applications * Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 7 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel Diameter Width (mm) W1 (mm) A0 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant UC2842D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC2842DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC2843D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC2843DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC2844D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC2844DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC2845D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC2845DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC3842D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC3842DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC3843D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC3843DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC3844D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC3844DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 UC3845D8TR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1 UC3845DTR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 19-Mar-2008 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) UC2842D8TR SOIC UC2842DTR SOIC D 8 2500 340.5 338.1 20.6 D 14 2500 333.2 345.9 28.6 UC2843D8TR SOIC UC2843DTR SOIC D 8 2500 340.5 338.1 20.6 D 14 2500 333.2 345.9 UC2844D8TR 28.6 SOIC D 8 2500 340.5 338.1 20.6 UC2844DTR SOIC D 14 2500 333.2 345.9 28.6 UC2845D8TR SOIC D 8 2500 340.5 338.1 20.6 UC2845DTR SOIC D 14 2500 333.2 345.9 28.6 UC3842D8TR SOIC D 8 2500 340.5 338.1 20.6 UC3842DTR SOIC D 14 2500 333.2 345.9 28.6 UC3843D8TR SOIC D 8 2500 340.5 338.1 20.6 UC3843DTR SOIC D 14 2500 333.2 345.9 28.6 UC3844D8TR SOIC D 8 2500 340.5 338.1 20.6 UC3844DTR SOIC D 14 2500 333.2 345.9 28.6 UC3845D8TR SOIC D 8 2500 340.5 338.1 20.6 UC3845DTR SOIC D 14 2500 333.2 345.9 28.6 Pack Materials-Page 2 MECHANICAL DATA MCER001A - JANUARY 1995 - REVISED JANUARY 1997 JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE 0.400 (10,16) 0.355 (9,00) 8 5 0.280 (7,11) 0.245 (6,22) 1 0.063 (1,60) 0.015 (0,38) 4 0.065 (1,65) 0.045 (1,14) 0.310 (7,87) 0.290 (7,37) 0.020 (0,51) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.100 (2,54) 0.014 (0,36) 0.008 (0,20) 4040107/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP1-T8 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MPLC004A - OCTOBER 1994 FN (S-PQCC-J**) PLASTIC J-LEADED CHIP CARRIER 20 PIN SHOWN Seating Plane 0.004 (0,10) 0.180 (4,57) MAX 0.120 (3,05) 0.090 (2,29) D D1 0.020 (0,51) MIN 3 1 19 0.032 (0,81) 0.026 (0,66) 4 E 18 D2 / E2 E1 D2 / E2 8 14 0.021 (0,53) 0.013 (0,33) 0.007 (0,18) M 0.050 (1,27) 9 13 0.008 (0,20) NOM D/E D2 / E2 D1 / E1 NO. OF PINS ** MIN MAX MIN MAX MIN MAX 20 0.385 (9,78) 0.395 (10,03) 0.350 (8,89) 0.356 (9,04) 0.141 (3,58) 0.169 (4,29) 28 0.485 (12,32) 0.495 (12,57) 0.450 (11,43) 0.456 (11,58) 0.191 (4,85) 0.219 (5,56) 44 0.685 (17,40) 0.695 (17,65) 0.650 (16,51) 0.656 (16,66) 0.291 (7,39) 0.319 (8,10) 52 0.785 (19,94) 0.795 (20,19) 0.750 (19,05) 0.756 (19,20) 0.341 (8,66) 0.369 (9,37) 68 0.985 (25,02) 0.995 (25,27) 0.950 (24,13) 0.958 (24,33) 0.441 (11,20) 0.469 (11,91) 84 1.185 (30,10) 1.195 (30,35) 1.150 (29,21) 1.158 (29,41) 0.541 (13,74) 0.569 (14,45) 4040005 / B 03/95 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-018 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated