83304E Non-Paired - MIL-W-16878/4 (Type E) For more information please call 1-800-Belden1 See Put-ups and Colors Description: 24 AWG stranded (19x36) silver-plated copper conductors, cabled and color-coded, extruded TFE Teflon(R) insulation, silver-plated copper braid shield (85% coverage), TFE teflon tape-wrapped jacket. PHYSICAL CHARACTERISTICS: CONDUCTOR: Number of Conductors 1 Total Number of Conductors 1 AWG 24 Stranding 19x36 Conductor Material SPC - Silver Plated Copper INSULATION: Insulation Material Trade Name Teflon(R) Insulation Material TFE - Tetrafluoroethylene Nom. Insulation Wall Thickness .010 in. Insulation Resistance 100, 000 Megaohms/1000 ft. @ 500 V DC OVERALL CABLING: Overall Cabling Color Code Chart White OUTER SHIELD: Outer Shield Type Braid Outer Shield Material SPC - Silver Plated Copper Outer Shield %Coverage 85 % OUTER JACKET: Outer Jacket Material Trade Name Teflon(R) Outer Jacket Material TFE - Tetrafluoroethylene Outer Jacket Nominal Wall Thickness .010 in. OVERALL NOMINAL DIAMETER: Overall Nominal Diameter .085 in. MECHANICAL CHARACTERISTICS: Page 1 of 3 83304E Non-Paired - MIL-W-16878/4 (Type E) Operating Temperature Range -65C To +200C Bulk Cable Weight 9.4 lbs/1000 ft. Max. Recommended Pulling Tension 15.5 lbs. Min. Bend Radius (Install) 0.875 in. APPLICABLE SPECIFICATIONS AND AGENCY COMPLIANCE: APPLICABLE STANDARDS: EU CE Mark (Y/N) Yes EU RoHS Compliant (Y/N) Yes EU RoHS Compliance Date (mm/dd/yyyy): 01/01/2005 Military Specification MIL-W-16878/4 (Type E except stranding, insulated conductors) FLAME TEST: UL Flame Test UL1685 UL Loading, VW-1 PLENUM/NON-PLENUM: Plenum (Y/N) N ELECTRICAL CHARACTERISTICS: Nom. Capacitance Conductor to Shield @ 1 KHz 46 pF/ft Nom. Conductor DC Resistance @ 20 Deg. C 23 Ohms/1000 ft Nominal Outer Shield DC Resistance @ 20 Deg. C 18 Ohms/1000 ft Max. Operating Voltage - UL 600 V RMS Max. Recommended Current 4 Amps per conductor @ 25C NOTES: Notes Teflon(R) is a registered trademark of E. I. duPont de Nemours and Co. used under license by Belden, Inc. PUT-UPS AND COLORS: Item Description Put-Up (ft.) 83304E 0091000 1 #24 TFE BRD TFE 1000 TAPE 83304E 009500 1 #24 TFE BRD TFE 500 TAPE Ship Weight (lbs.) 8 Jacket Color WHITE Notes E 4.5 WHITE E E = MAY CONTAIN MORE THAN 1 PIECE. MINIMUM LENGTH OF ANY ONE PIECE IS 25' Revision Number: 2 Revision Date: 06-07-2005 Page 2 of 3 83304E Non-Paired - MIL-W-16878/4 (Type E) (c) 2005 Belden Wire & Cable Company All Rights Reserved. Although Belden Electronics Division ("Belden") makes every reasonable effort to ensure their accuracy at the time of this publication, information and specifications described herein are subject to error or omission and to change without notice, and the listing of such information and specifications does not ensure product availability. Belden provides the information and specifications herein on an "AS IS" basis, with no representations or warranties, whether express, statutory or implied. In no event will Belden be liable for any damages (including consequential, indirect, incidental, special, punitive, or exemplary damages) whatsoever, even if Belden has been advised of the possibility of such damages, whether in an action under contract, negligence or any other theory, arising out of or in connection with the use, or inability to use, the information or specifications described herein. All sales of Belden products are subject to Belden's standard terms and conditions of sale. Belden CDT Electronics Division believes this product to be in compliance with the following environmental regulations: California Proposition 65 Consent Judgment For Wire & Cable Mfgs.(San Francisco Superior Court Nos. 312962 And 320342); EU RoHS (Directive 2002/95/EC, 27-Jan-2003);Material manufactured prior to the compliance date may still be in stock at Belden facilities and in our Distributor's inventory. EU ELV (Directive 2000/53/EC, 18-Sept-2000); EU WEEE (Directive 2002/96/EC, 27-Jan-2003); And EU BFR (Directive 2003/11/EC, 6-Feb-2003). The information provided in this Product Disclosure, and the identification of materials listed as reportable or restricted within the Product Disclosure, is correct to the best of Belden's knowledge, information and belief at the date of its publication. The information provided in the Product Disclosure is designed only as a general guide for the safe handling, storage, and any other operation of the product itself or the one that it becomes a part of. This Product Disclosure is not to be considered a warranty or quality specification. Regulatory information is for guidance purposes only. Product users are responsible for determining the applicability of legislation and regulations based on their individual usage of the product. Belden CDT Electronics Division declares this product to be in compliance with EU LVD (Low Voltage Directive 73/23/EEC), as amended by directive 93/68/EEC. Page 3 of 3