DATA SHEET Solid State Relay OCMOS FET PS7360-1A,PS7360L-1A 6-PIN DIP, HIGH ISOLATION VOLTAGE 1-ch Optical Coupled MOS FET DESCRIPTION The PS7360-1A and PS7360L-1A are solid state relays containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. They are suitable for analog signal control because of their low offset and high linearity. The PS7360L-1A has a surface mount type lead. FEATURES * High isolation voltage (BV = 3 750 Vr.m.s.) * 1 channel type (1 a output) * Low LED operating current (IF = 2 mA) * Designed for AC/DC switching line changer * Small package (6-pin DIP) * Low offset voltage * PS7360L-1A: Surface mount type * UL approved: File No. E72422 (S) * BSI approved: No. 8252/8253 * CSA approved: No. CA 101391 APPLICATIONS * Exchange equipment * Measurement equipment * FA/OA equipment The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version. Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices representative for availability and additional information. Document No. PN10310EJ01V1DS (1st edition) (Previous No. P11567EJ6V0DS00) Date Published February 2003 CP(K) Printed in Japan The mark * shows major revised points. NEC Compound Semiconductor Devices 1996, 2003 PS7360-1A,PS7360L-1A PACKAGE DIMENSIONS (in millimeters) PS7360-1A 9.250.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 7.62 3.50.3 3.30.3 4.150.3 6.50.5 0.50.1 1.340.1 0.25 M 0 to 15 2.54 PS7360L-1A 9.250.5 TOP VIEW 6 5 4 1 2 3 1. LED Anode 2. LED Cathode 3. NC 4. MOS FET Drain 5. MOS FET Source 6. MOS FET Drain 3.50.3 0.10+0.10 -0.05 6.50.5 1.340.1 0.25 M 2 0.90.25 2.54 9.600.4 Data Sheet PN10310EJ01V1DS PS7360-1A,PS7360L-1A ORDERING INFORMATION Part Number PS7360-1A Package 6-pin DIP Packing Style Magazine case 50 pcs PS7360L-1A PS7360L-1A-E3 Application Part Number *1 PS7360-1A PS7360L-1A Embossed Tape 1 000 pcs/reel PS7360L-1A-E4 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10310EJ01V1DS 3 PS7360-1A,PS7360L-1A ABSOLUTE MAXIMUM RATINGS (TA = 25 C, unless otherwise specified) Diode Parameter Symbol Ratings Unit Forward Current (DC) IF 50 mA Reverse Voltage VR 5.0 V PD 50 mW IFP 1 A VL 600 V IL 90 (120) mA Power Dissipation Peak Forward Current MOS FET *1 Break Down Voltage Continuous Load Current Connection A *2 Pulse Load Current Connection B 130 (160) Connection C 200 (210) *3 ILP 250 mA PD 560 mW BV 3 750 Vr.m.s. Total Power Dissipation PT 610 mW Operating Ambient Temperature TA -40 to +85 C Storage Temperature Tstg -40 to +125 C (AC/DC Connection) Power Dissipation Isolation Voltage *4 *1 PW = 100 s, Duty Cycle = 1 % *2 Conditions: IF 2 mA. Conditions: IF 5 mA. Load current ( ) value is. The following types of load connections are available. Connection A Connection B Connection C 1 2 3 1 2 3 1 2 3 1 2 3 6 5 4 6 5 IL IL VL (AC/DC) L L + VL (DC) - 4 6 5 4 6 5 IL 4 IL IL L L IL + IL - + VL (DC) + VL (DC) - *3 PW = 100 ms, 1 shot *4 AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output 4 Data Sheet PN10310EJ01V1DS PS7360-1A,PS7360L-1A RECOMMENDED OPERATING CONDITIONS (TA = 25 C) Parameter Symbol MIN. TYP. MAX. Unit LED Operating Current IF 2 10 20 mA LED Off Voltage VF 0 0.5 V ELECTRICAL CHARACTERISTICS (TA = 25 C) Parameter Diode MOS FET Coupled Symbol Conditions MIN. TYP. MAX. Unit 1.2 1.4 V 5.0 A 1.0 A Forward Voltage VF IF = 10 mA Reverse Current IR VR = 5 V Off-state Leakage Current ILoff VD = 600 V 0.03 Output Capacitance Cout VD = 0 V, f = 1 MHz 110 LED On-state Current IFon IL = 90 mA On-state Resistance Ron1 IF = 10 mA, IL = 10 mA pF 2.0 mA 41 50 Ron2 IF = 10 mA, IL = 90 mA, t 10 ms 33 45 Turn-on Time *1 ton IF = 10 mA, VO = 5 V, RL = 2 k, 0.6 2.0 Turn-off Time *1 toff PW 10 ms 0.03 0.2 Isolation Resistance RI-O VI-O = 1.0 kVDC Isolation Capacitance CI-O V = 0 V, f = 1 MHz ms 9 10 1.1 pF *1 Test Circuit for Switching Time IF Pulse Input VL 50 % Input 0 VO = 5 V Input monitor 90 % VO monitor Output Rin RL 10 % ton Data Sheet PN10310EJ01V1DS toff 5 PS7360-1A,PS7360L-1A TYPICAL CHARACTERISTICS (TA = 25 C, unless otherwise specified) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE 150 Maximum Load Current IL (mA) Maximum Forward Current IF (mA) 100 80 60 40 20 0 -25 0 25 7585 50 100 75 50 25 0 -25 100 0 25 85 FORWARD VOLTAGE vs. AMBIENT TEMPERATURE OUTPUT CAPACITANCE vs. APPLIED VOLTAGE 100 250 Output Capacitance Cout (pF) 1.4 f = 1 MHz 1.2 1.0 0 25 50 75 200 150 100 50 0 100 20 40 60 80 100 120 Ambient Temperature TA (C) Applied Voltage VD (V) OFF-STATE LEAKAGE CURRENT vs. APPLIED VOLTAGE LOAD CURRENT vs. LOAD VOLTAGE 10-3 150 IF = 10 mA -4 10 100 TA = 85 C Load Current IL (mA) Off-state Leakage Current ILoff (A) 75 Ambient Temperature TA (C) IF = 50 mA 30 mA 20 mA 10 mA 5 mA 1 mA 0.8 -25 10-5 10-6 -7 10 25 C 50 -4.0 10-8 10-9 0 -2.0 0 -50 -100 100 200 300 400 500 600 Applied Voltage VD (V) 6 50 Ambient Temperature TA (C) 1.6 Forward Voltage VF (V) 125 -150 Load Voltage VL (V) Data Sheet PN10310EJ01V1DS 2.0 4.0 PS7360-1A,PS7360L-1A NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE ON-STATE RESISTANCE DISTRIBTION 30 Normalized to 1.0 at TA = 25 C, IF = 10 mA, IL = 10 mA 2.5 2.0 1.5 1.0 0.5 0.0 -25 n = 50 pcs, IF = 10 mA, IL = 10 mA 25 Number (pcs) Normalized On-state Resistance Ron 3.0 20 15 10 5 0 25 50 0 100 75 40 41 Ambient Temperature TA (C) On-state Resistance Ron () TURN-ON TIME vs. FORWARD CURRENT TURN-OFF TIME vs. FORWARD CURRENT 8.0 0.5 VO = 5 V Turn-off Time toff (ms) Turn-on Time ton (ms) VO = 5 V 6.0 4.0 2.0 0 10 20 30 0.4 0.3 0.2 0.1 0 Forward Current IF (mA) 30 TURN-OFF TIME DISTRIBUTION TURN-ON TIME DISTRIBUTION 30 n = 50 pcs, IF = 10 mA, VO = 5 V 25 20 15 10 n = 50 pcs, IF = 10 mA, VO = 5 V 25 Number (pcs) Number (pcs) 20 Forward Current IF (mA) 30 20 15 10 5 5 0 10 0.5 0.6 0 Turn-on Time ton (ms) 0.03 0.05 Turn-off Time toff (ms) Data Sheet PN10310EJ01V1DS 7 PS7360-1A,PS7360L-1A NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE 3.0 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 Normalized Turn-off Time toff Normalized Turn-on Time ton 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 Ambient Temperature TA (C) 0 25 50 75 Ambient Temperature TA (C) Remark The graphs indicate nominal characteristics. 8 Normalized to 1.0 at TA = 25 C, IF = 10 mA, VO = 5 V Data Sheet PN10310EJ01V1DS 100 PS7360-1A,PS7360L-1A TAPING SPECIFICATIONS (in millimeters) 4.5 MAX. 10.30.1 7.50.1 1.5 +0.1 -0 16.00.3 2.00.1 4.00.1 1.750.1 Outline and Dimensions (Tape) 4.00.1 10.40.1 1.550.1 12.00.1 0.3 Tape Direction PS7360L-1A-E3 PS7360L-1A-E4 Outline and Dimensions (Reel) 2.00.5 R 1.0 21.00.8 1001.0 3302.0 2.00.5 13.00.2 17.51.0 21.51.0 Packing: 1 000 pcs/reel Data Sheet PN10310EJ01V1DS 15.9 to 19.4 Outer edge of flange 9 PS7360-1A,PS7360L-1A RECOMMENDED SOLDERING CONDITIONS (1) Infrared reflow soldering * Peak reflow temperature 260C or below (package surface temperature) * Time of peak reflow temperature 10 seconds or less * Time of temperature higher than 220C 60 seconds or less * Time to preheat temperature from 120 to 180C 12030 s * Number of reflows Two * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Package Surface Temperature T (C) Recommended Temperature Profile of Infrared Reflow (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature 260C or below (molten solder temperature) * Time 10 seconds or less * Preheating conditions 120C or below (package surface temperature) * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 10 Data Sheet PN10310EJ01V1DS PS7360-1A,PS7360L-1A * The information in this document is current as of February, 2003. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. * No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. * NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. * Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer's equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. * While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment, and anti-failure features. * NEC semiconductor products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products developed based on a customer-designated "quality assurance program" for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. (Note) (1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd. and also includes its majority-owned subsidiaries. (2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for NEC (as defined above). M8E 00. 4 - 0110 Data Sheet PN10310EJ01V1DS 11 PS7360-1A,PS7360L-1A SAFETY INFORMATION ON THIS PRODUCT Caution GaAs Products The product contains gallium arsenide, GaAs. GaAs vapor and powder are hazardous to human health if inhaled or ingested. * Do not destroy or burn the product. * Do not cut or cleave off any part of the product. * Do not crush or chemically dissolve the product. * Do not put the product in the mouth. Follow related laws and ordinances for disposal. The product should be excluded from general industrial waste or household garbage. For further information, please contact NEC Compound Semiconductor Devices, Ltd. 5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579 E-mail: salesinfo@csd-nec.com NEC Compound Semiconductor Devices Hong Kong Limited Hong Kong Head Office FAX: +852-3107-7309 TEL: +852-3107-7303 Taipei Branch Office TEL: +886-2-8712-0478 FAX: +886-2-2545-3859 Korea Branch Office FAX: +82-2-558-5209 TEL: +82-2-558-2120 NEC Electronics (Europe) GmbH http://www.ee.nec.de/ TEL: +49-211-6503-01 FAX: +49-211-6503-487 California Eastern Laboratories, Inc. http://www.cel.com/ TEL: +1-408-988-3500 FAX: +1-408-988-0279 0302