BROXA, DIODES LIMITED BROXA & BRIOXA FAMILY FAIRACRES ESTATE, DEDWORTH ROAD. b WINDSOR, BERKSHIRE. BRIDGE RECTIFIERS Telephone: WINDSOR 69571 Telex: 847255 SEMICONDUCTOR MANUFACTURERS e 4 AMP, 6 AMP AND 10 AMP RATING e 50 TO 800 VOLTS (P.I.V.) e@ SINGLE PHASE FULL WAVE e@ EXTREMELY LOW INVERSE CURRENT e CONSTRUCTED WITH CONTROLLED AVALANCHE DEVICES e COMPACT e RUGGED e ECONOMICAL S a < < < < < mo S/T Halt fale < l/t cit < PARAMETER 8 Sle 5 2/8 Slt # Sig 8 Slee mee Mel me Mr hr Mrmr Mh a 2 A Mio me eRe Mae Mm eRe Mie Rm Peak Inverse Voltage (per leg) 50 100 200 400 600 800 RMS Input Voltage (Sinusoidal Wave) 35 70 140 280 420 560 Average Rectified Forward Current (Note 1.) Amps 4/6/10} 4] 6 |10| 4|6 j;10| 4] 6|10| 4] 6 }10) 4/6 {10 Non-Repetitive Surge Current (Note 2.) Amps SISiS/S/S/SISISIS|SISIS/S/S/3/S/S/85 Sloat al sale Alals| Alale [a] ole] al als Recurrent Peak Current Amps 6| 8/12) 6] 8/12} 6/ 8/12! 6] 8}12) 6] 8/12] 6 |'8 | 12 Reverse Current @ PIV UA 5110/25) 5/10] 25) 5110/25; 5 |10]25) 5 |10/ 25] 5 |10)25 Reverse Current @ PIV @ 100C vA 15 | 30] 75| 15) 30) 75/15) 30) 75} 15) 30) 75 | 15] 30 | 75|15| 30] 75 Forward Voltage Drop @ Rated Current (per leg) 1.2 1.2 1.2 1.2 1.2 1.2 Ambient Storage Temperature 65C to + 150C Ambient Operating Temperature 65C to + 150C NOTE 1. Output current ratings listed are specified when unit is mounted to a flat heat conducting surface which is held to a tem- perature of 50C or less. For heat sink temperatures above 50C refer to the Derating Curve (Figure 2). NOTE 2. Maximum surge current listed is specified as peak current of a 60 cycle sine wave for a duration of % cycle (8 milliseconds). COOLING For maximum cooling efficiency apply silicone grease to the base of the rectifier and mount to large metal surface with binder head machine screw(s). Use at least #18 wire to all terminals. MARKING AC terminals, indicated by yellow dots. Positive DC terminal indicated by red dot, and negative DC terminal indicated by black dot. Bridge type is stamped on the side of unit. 4 AMP, 6 AMP AND 10 AMP BRIDGEPER CENT RATED DC OUTPUT CURRENT FIG. 2 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150 HEAT SINK TEMPERATURE C MECHANICAL SPECIFICATIONS BR-6XA SERIES BR-9XA SERIES BH | BY is 25 Mi ! 125 | | be .20 TYP TT GD + @/' @ 17 DIA. MARKING: ac terminals indicated by yellow dots. Positive dc terminal indicated by red dot and negative dc terminal indicated by black dot. Bridge type number is stamped on side of the unit. DIODES LIMITED FIG. 1 . P| a 100 a a2 80 ~~ w O a5 PN ZF 6 . rE a6 uw C6 N ra N ld 40 26 g N s N > < 20 1 1.5 2 3 4 6 8 10 FORM FACTOR BR-10XA SERIES 0,25 aur ay Iams AVG Lowe aoe ot +. Le -25 MAX. 2.02 P| 1.64 oo | Oo 0.25 TYP. Te p t 0.25 TYP. COOLING: for maximum cooling efficiency appiy silicone grease to the base of the bridge rectifier and mount to a large metal surface with binder head machine screws. Use at least #18 wire to all terminals. 4-6-10 AMP BRIDGES FAIRACRES ESTATE, DEDWORTH ROAD, WINDSOR, BERKSHIRE. Telephone: WINDSOR 695771 Telex: 847255 b SEMICONDUCTOR MANUFACTURERS