01.11.2013Page1/6

Panel feed-through terminal block-UWV 16/S-3073432

Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's

documentation. Our General Terms of Use for Downloads are valid

Panel feed-through terminal block, Connection method:Screw connection, Load current :101 A, Cross section:6

mm²-25 mm², AWG10-6, Connection direction of the conductor to plug-in direction:90 °, Width:12.1 mm,

Spacer plates increase air and creepage distances

Universal screw connection with screw locking



Key commercial data

Packing unit 1 1

Custom tariff number 85369010

Country of origin China

Technical data

Number of levels 1

Pollution degree 3

Surge voltage category III

01.11.2013Page2/6

Panel feed-through terminal block-UWV 16/S-3073432

Technical data

Insulating material group I

Connection in acc. with standard IEC 60947-7-1

Nominal current IN76 A

Nominal voltage UN800 V with spacer plate

Open side panel nein

Number of positions 1

Note Note: Product releases, connection cross sections and notes on

connecting aluminum cables can be found in the download area.

Conductor cross section solid min. 6 mm²

Conductor cross section solid max. 25 mm²

Conductor cross section stranded min. 6 mm²

Conductor cross section stranded max. 16 mm²

Conductor cross section AWG/kcmil min. 10

Conductor cross section AWG/kcmil max 4

Conductor cross section stranded, with ferrule without plastic sleeve min. 6 mm²

Conductor cross section stranded, with ferrule without plastic sleeve max. 16 mm²

2 conductors with same cross section, stranded, ferrules without plastic

sleeve, min. 4 mm²

2 conductors with same cross section, stranded, ferrules without plastic

sleeve, max. 6 mm²

2 conductors with same cross section, stranded, TWIN ferrules with plastic

sleeve, min. 4 mm²

2 conductors with same cross section, stranded, TWIN ferrules with plastic

sleeve, max. 6 mm²

Stripping length 16 mm

Internal cylindrical gage B 7

01.11.2013Page3/6

Panel feed-through terminal block-UWV 16/S-3073432

Technical data

Connection data

Screw thread M5

Tightening torque, min 2.5 Nm

Tightening torque max 3 Nm

eCl@ss 6.0 27141134

eCl@ss 7.0 27141134

eCl@ss 8.0 27141134

ETIM 2.0 EC001283

ETIM 3.0 EC001283

ETIM 4.0 EC001283

ETIM 5.0 EC001283

UNSPSC 6.01 30211811

UL Recognized / GOST

Ex Approvals

01.11.2013Page4/6

Panel feed-through terminal block-UWV 16/S-3073432

Approvals submitted

Approval details

UL Recognized

 B C

mm²/AWG/kcmil 10-4 10-4

Nominal current IN 85 A 85 A

Nominal voltage UN 600 V 600 V

Partition plate

Spacer plate-DP-UWV 16-3074428

Spacer plate, Color:gray

Screwdriver tools

01.11.2013Page5/6

Panel feed-through terminal block-UWV 16/S-3073432

Screwdriver-SZS 1,0X4,0 VDE-1205066

Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip

Marker for terminal blocks-UC-TMF 12-0819233

Marker for terminal blocks, Sheet, white, Unlabeled, Can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,

Mounting type: Snap into flat marker groove, For terminal block width: 12 mm, Lettering field: 11.45 x 5.1 mm

Zack marker strip-ZB 12:UNPRINTED-0812120

Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For

terminal block width: 12.2 mm, Lettering field: 12 x 10.5 mm

01.11.2013Page6/6

Panel feed-through terminal block-UWV 16/S-3073432

Marker for terminal blocks-TMT 100 R-0816605

Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X,

THERMOMARK S1.1, Unperforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove,

Marker for terminal blocks-TMT (EX9,5)R-0828295

Marker for terminal blocks, Roll, white, Unlabeled, Can be labeled with: THERMOMARK ROLL, THERMOMARK X,

THERMOMARK S1.1, Mounting type: Snap into universal marker groove, Snap into flat marker groove, Lettering field:

9.5 x 50000 mm