PAGE . 1
June 2,2011-REV.03
ES1AW SERIES
FEATURES
• For surface mounted applications
• Low profile package
• Built-in strain relief
• Easy pick and place
• Superfast recovery times for high efficiency
• Plastic package has Underwriters Laboratory
Fla mmability Cla ssification 94V-O
• In compliance with EU RoHS 2002/95/EC directives
MECHANICAL DA TA
• Ca se: JEDEC DO-214AC molded plastic
• Terminals: Solder plated, solderable per MIL-STD-750,Method 2026
• Polarity: Indicated by cathode band
• Standard packaging: 12mm tape (EIA-481)
• Weight: 0.0023 ounce, 0.0679 gram
SURF ACE MOUNT SUPERF AST RECTIFIER
MAXIMUM RA TINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
NOTES:
1.Reverse Recovery Tset Conditions:IF=0.5A,IR=1.0A,Irr=0.25A
2.Measured at 1.0MHz and applied reverse voltage of 4.0 volts.
3.8.0mm2( .013mm thick ) land areas.
50 to 600 Volts 1.0 Ampere
CURRENT
VOLTAGE
PARAMETER SYMBOL ES1AW ES1BW ES1CW ES1DW ES1EW ES1GW ES1JW UNITS
Maximum Recurrent Peak Reverse Voltage V
RRM
50 100 150 200 300 400 600 V
Maximum RMS Voltage V
RMS
35 70 105 140 210 280 420 V
Maximum DC Blocking Voltage V
DC
50 100 150 200 300 400 600 V
Maximum Average Forward Current at T
L
=105
O
CI
F(AV)
1.0 A
Peak Forward Surge Current : 8.3ms single half sine-wave
superimposed on rated load (JEDEC method) I
FSM
30 A
Maximum Forward Voltage at 1.0A V
F
0.95 1.25 1.7 V
Maximum DC Reverse Current at Rated DC
Blocking Voltage T
J
= 25
O
C
T
J
=100
O
CI
R
1.0
10 μA
Maximum Reverse Recovery Time (Note 1) t
rr
35 ns
Typical Junction Capacitance (Note 2) C
J
7.0 pF
Typical Thermal Resistance (Note 3) R
θJL
35
O
C / W
Operating Junction and Storage Temperature Range T
J
,T
STG
-55 to +150
O
C