DATA SH EET
Product specification
Supersedes data of 2003 Feb 24 2003 Sep 04
INTEGRATED CIRCUITS
74LVC04A
Hex inverter
2003 Sep 04 2
Philips Semiconductors Product specification
Hex inverter 74LVC04A
FEATURES
5 V tolerant inputs for interfacing with 5 V logic
Wide supply voltage range from 1.2 to 3.6 V
CMOS low power consumption
Direct interface with TTL levels
Inputs accept voltages up to 5.5 V
Complies with JEDEC standard no. 8-1A
ESD protection:
HBM EIA/JESD22-A114-A exceeds 2000 V
MM EIA/JESD22-A115-A exceeds 200 V.
Specified from 40 to +85 °C and 40 to +125 °C.
DESCRIPTION
The 74LVC04A is a high-performance, low-power,
low-voltage, Si-gate CMOS device, superior to most
advanced CMOS compatible TTL families.
Inputs can be driven from either 3.3 or 5 V devices. This
feature allows the use of these devices as translators in a
mixed 3.3 and 5 V environment.
The 74LVC04A provides six inverting buffers.
QUICK REFERENCE DATA
GND = 0 V; Tamb =25°C; tr=t
f2.5 ns.
Notes
1. CPD is used to determine the dynamic power dissipation (PDin µW).
PD=C
PD ×VCC2×fi×N+Σ(CL×VCC2×fo) where:
fi= input frequency in MHz;
fo= output frequency in MHz;
CL= output load capacitance in pF;
VCC = supply voltage in Volts;
N = total load switching outputs;
Σ(CL×VCC2×fo) = sum of the outputs.
2. The condition is VI= GND to VCC.
FUNCTION TABLE
See note 1.
Note
1. H = HIGH voltage level;
L = LOW voltage level.
SYMBOL PARAMETER CONDITIONS TYPICAL UNIT
tPHL/tPLH propagation delay nA to nY CL= 50 pF; VCC = 3.3 V 2.1 ns
CIinput capacitance 4.0 pF
CPD power dissipation capacitance per gate VCC = 3.3 V; notes 1 and 2 15 pF
INPUT OUTPUT
nA nY
LH
HL
2003 Sep 04 3
Philips Semiconductors Product specification
Hex inverter 74LVC04A
ORDERING INFORMATION
PINNING
TYPE NUMBER PACKAGE
TEMPERATURE RANGE PINS PACKAGE MATERIAL CODE
74LVC04AD 40 to +125 °C 14 SO14 plastic SOT108-1
74LVC04ADB 40 to +125 °C 14 SSOP14 plastic SOT337-1
74LVC04APW 40 to +125 °C 14 TSSOP14 plastic SOT402-1
74LVC04ABQ 40 to +125 °C 14 DHVQFN14 plastic SOT762-1
PIN SYMBOL DESCRIPTION
1 1A data input
2 1Y data output
3 2A data input
4 2Y data output
5 3A data input
6 3Y data output
7 GND ground (0 V)
8 4Y data output
9 4A data input
10 5Y data output
11 5A data input
12 6Y data output
13 6A data input
14 VCC supply voltage
2003 Sep 04 4
Philips Semiconductors Product specification
Hex inverter 74LVC04A
handbook, halfpage
MNA340
04
1
2
3
4
5
6
78
14
13
12
11
10
9
1A
1Y
2A
2Y
3A
3Y
GND 4Y
4A
5Y
5A
6Y
6A
VCC
Fig.1 Pin configuration SO14 and (T)SSOP14.
handbook, halfpage
114
GND(1)
1A VCC
7
2
3
4
5
6
1Y
2A
2Y
3A
3Y
13
12
11
10
9
6A
6Y
5A
5Y
4A
8
GND
Top view 4Y
MBL760
Fig.2 Pin configuration DHVQFN14.
(1) The die substrate is attached to this pad using conductive die
attach material. It can not be used as a supply pin or input.
handbook, halfpage
MNA342
1A 1Y
12
2A 2Y
34
3A 3Y
56
4A 4Y
98
5A 5Y
11 10
6A 6Y
13 12
Fig.3 Logic symbol. Fig.4 Logic symbol (IEEE/IEC).
handbook, halfpage
112
MNA343
314
516
918
11 110
13 112
2003 Sep 04 5
Philips Semiconductors Product specification
Hex inverter 74LVC04A
handbook, halfpage
MNA341
AY
Fig.5 Logic diagram (one gate).
RECOMMENDED OPERATING CONDITIONS
LIMITING VALUES
In accordance with the absolute maximum rating system (IEC 60134); voltages are referenced to GND (ground=0V).
Notes
1. The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
2. For SO14 packages: above 70 °C derate linearly with 8 mW/K.
For SSOP14 and TSSOP14 packages: above 60 °C derate linearly with 5.5 mW/K.
For DHVQFN14 packages: above 60 °C derate linearly with 4.5 mW/K.
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCC supply voltage for maximum speed performance 2.7 3.6 V
for low-voltage applications 1.2 3.6 V
VIinput voltage 0 5.5 V
VOoutput voltage 0 VCC V
Tamb ambient temperature 40 +125 °C
tr,t
finput rise and fall times VCC = 1.2 to 2.7 V 0 20 ns/V
VCC = 2.7 to 3.6 V 0 10 ns/V
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
VCC supply voltage 0.5 +6.5 V
IIK input diode current VI<0 −−50 mA
VIinput voltage note 1 0.5 +6.5 V
IOK output diode current VO>V
CC or VO<0 −±50 mA
VOoutput voltage note 1 0.5 VCC + 0.5 V
IOoutput source or sink current VO=0toV
CC −±50 mA
ICC, IGND VCC or GND current −±100 mA
Tstg storage temperature 65 +150 °C
Ptot power dissipation per package Tamb =40 to +125 °C; note 2 500 mW
2003 Sep 04 6
Philips Semiconductors Product specification
Hex inverter 74LVC04A
DC CHARACTERISTICS
At recommended operating conditions; voltages are referenced to GND (ground=0V).
SYMBOL PARAMETER TEST CONDITIONS MIN. TYP.(1) MAX. UNIT
OTHER VCC (V)
Tamb =40 to +85 °C
VIH HIGH-level input voltage 1.2 VCC −−V
2.7 to 3.6 2.0 −−V
V
IL LOW-level input voltage 1.2 −−GND V
2.7 to 3.6 −−0.8 V
VOH HIGH-level output voltage VI=V
IH or VIL
IO=100 µA 2.7 to 3.6 VCC 0.2 −−V
I
O
=12 mA 2.7 VCC 0.5 −−V
I
O
=18 mA 3.0 VCC 0.6 −−V
I
O
=24 mA 3.0 VCC 0.8 −−V
V
OL LOW-level output voltage VI=V
IH or VIL
IO= 100 µA 2.7 to 3.6 −−0.2 V
IO=12mA 2.7 −−0.4 V
IO=24mA 3.0 −−0.55 V
ILI input leakage current VI= 5.5 Vor GND 3.6 −±0.1 ±5µA
ICC quiescent supply current VI=V
CC or GND;
IO=0 3.6 0.1 10 µA
ICC additionalquiescentsupply
current per input pin VI=VCC 0.6 V;
IO=0 2.7 to 3.6 5 500 µA
2003 Sep 04 7
Philips Semiconductors Product specification
Hex inverter 74LVC04A
Note
1. All typical values are measured at VCC = 3.3 V and Tamb =25°C.
Tamb =40 to +125 °C
VIH HIGH-level input voltage 1.2 VCC −−V
2.7 to 3.6 2.0 −−V
V
IL LOW-level input voltage 1.2 −−GND V
2.7 to 3.6 −−0.8 V
VOH HIGH-level output voltage VI=V
IH or VIL
IO=100 µA 2.7 to 3.6 VCC 0.3 −−V
I
O
=12 mA 2.7 VCC 0.65 −−V
I
O
=18 mA 3.0 VCC 0.75 −−V
I
O
=24 mA 3.0 VCC 1−−V
V
OL LOW-level output voltage VI=V
IH or VIL
IO= 100 µA 2.7 to 3.6 −−0.3 V
IO=12mA 2.7 −−0.6 V
IO=24mA 3.0 −−0.8 V
ILI input leakage current VI= 5.5 Vor GND 3.6 −−±20 µA
ICC quiescent supply current VI=V
CC or GND;
IO=0 3.6 −−40 µA
ICC additionalquiescentsupply
current per input pin VI=VCC 0.6 V;
IO=0 2.7 to 3.6 −−5000 µA
SYMBOL PARAMETER TEST CONDITIONS MIN. TYP.(1) MAX. UNIT
OTHER VCC (V)
2003 Sep 04 8
Philips Semiconductors Product specification
Hex inverter 74LVC04A
AC CHARACTERISTICS
GND = 0 V; tr=t
f2.5 ns.
Notes
1. All typical values are measured at VCC = 3.3 V.
2. Skew between any two outputs of the same package switching in the same direction. This parameter is guaranteed
by design.
AC WAVEFORMS
SYMBOL PARAMETER TEST CONDITIONS MIN. TYP.(1) MAX. UNIT
WAVEFORMS VCC (V)
Tamb =40 to +85 °C
tPHL/tPLH propagation delay nA to nY see Figs 6 and 7 1.2 14 ns
2.7 1.0 2.2 5.5 ns
3.0 to 3.6 1.0 1.9 4.5 ns
tsk(0) skew note 2 3.0 to 3.6 −−1.0 ps
Tamb =40 to +125 °C
tPHL/tPLH propagation delay nA to nY see Figs 6 and 7 1.2 −−−ns
2.7 1.0 7.0 ns
3.0 to 3.6 1.0 6.0 ns
tsk(0) skew note 2 3.0 to 3.6 −−1.5 ps
Fig.6 The input nA to output nY propagation delays.
VM= 1.5 V at VCC 2.7 V;
VM= 0.5VCC at VCC < 2.7 V;
VOL and VOH are typical output voltage drop that occur with the output load.
handbook, halfpage
MNA344
tPHL tPLH
VM
VM
nA input
nY output
GND
VI
VOH
VOL
2003 Sep 04 9
Philips Semiconductors Product specification
Hex inverter 74LVC04A
handbook, full pagewidth
open
GND
50 pF
2 × VCC
VCC
VIVO
MNA368
D.U.T.
CL
RT
RL
500
RL
500
PULSE
GENERATOR
S1
Fig.7 Load circuitry for switching times.
VCC VItPLH/tPHL
1.2 V VCC open
2.7 V 2.7 V open
3.0 to 3.6 V 2.7 V open
Definitions for test circuits:
RL= Load resistor.
CL= Load capacitance including jig and probe capacitance.
RT= Termination resistance should be equal to the output impedance Zo of the pulse generator.
2003 Sep 04 10
Philips Semiconductors Product specification
Hex inverter 74LVC04A
PACKAGE OUTLINES
UNIT A
max. A1A2A3bpcD
(1) E(1) (1)
eH
ELL
pQZywv θ
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm
inches
1.75 0.25
0.10 1.45
1.25 0.25 0.49
0.36 0.25
0.19 8.75
8.55 4.0
3.8 1.27 6.2
5.8 0.7
0.6 0.7
0.3 8
0
o
o
0.25 0.1
DIMENSIONS (inch dimensions are derived from the original mm dimensions)
Note
1. Plastic or metal protrusions of 0.15 mm (0.006 inch) maximum per side are not included.
1.0
0.4
SOT108-1
X
wM
θ
A
A1
A2
bp
D
HE
Lp
Q
detail X
E
Z
e
c
L
vMA
(A )
3
A
7
8
1
14
y
076E06 MS-012
pin 1 index
0.069 0.010
0.004 0.057
0.049 0.01 0.019
0.014 0.0100
0.0075 0.35
0.34 0.16
0.15 0.05
1.05
0.041
0.244
0.228 0.028
0.024 0.028
0.012
0.01
0.25
0.01 0.004
0.039
0.016
99-12-27
03-02-19
0 2.5 5 mm
scale
SO14: plastic small outline package; 14 leads; body width 3.9 mm SOT108-1
2003 Sep 04 11
Philips Semiconductors Product specification
Hex inverter 74LVC04A
UNIT A1A2A3bpcD
(1) E(1) eH
ELL
pQZywv θ
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.21
0.05 1.80
1.65 0.25 0.38
0.25 0.20
0.09 6.4
6.0 5.4
5.2 0.65 1.25 0.2
7.9
7.6 1.03
0.63 0.9
0.7 1.4
0.9 8
0
o
o
0.13 0.1
DIMENSIONS (mm are the original dimensions)
Note
1. Plastic or metal protrusions of 0.25 mm maximum per side are not included.
SOT337-1 99-12-27
03-02-19
(1)
wM
bp
D
HE
E
Z
e
c
vMA
X
A
y
17
14 8
θ
A
A1
A2
Lp
Q
detail X
L
(A )
3
MO-150
pin 1 index
0 2.5 5 mm
scale
SSOP14: plastic shrink small outline package; 14 leads; body width 5.3 mm SOT337-1
A
max.
2
2003 Sep 04 12
Philips Semiconductors Product specification
Hex inverter 74LVC04A
UNIT A
1
A
2
A
3
b
p
cD
(1)
E
(2) (1)
eH
E
LL
p
QZywv θ
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 0.15
0.05 0.95
0.80 0.30
0.19 0.2
0.1 5.1
4.9 4.5
4.3 0.65 6.6
6.2 0.4
0.3 0.72
0.38 8
0
o
o
0.13 0.10.21
DIMENSIONS (mm are the original dimensions)
Notes
1. Plastic or metal protrusions of 0.15 mm maximum per side are not included.
2. Plastic interlead protrusions of 0.25 mm maximum per side are not included.
0.75
0.50
SOT402-1 MO-153 99-12-27
03-02-18
w
M
b
p
D
Z
e
0.25
17
14 8
θ
A
A
1
A
2
L
p
Q
detail X
L
(A )
3
H
E
E
c
v
M
A
X
A
y
0 2.5 5 mm
scale
TSSOP14: plastic thin shrink small outline package; 14 leads; body width 4.4 mm SOT402-1
A
max.
1.1
pin 1 index
2003 Sep 04 13
Philips Semiconductors Product specification
Hex inverter 74LVC04A
terminal 1
index area
0.51
A1Eh
b
UNIT ye
0.2
c
REFERENCES
OUTLINE
VERSION EUROPEAN
PROJECTION ISSUE DATE
IEC JEDEC JEITA
mm 3.1
2.9
Dh
1.65
1.35
y1
2.6
2.4 1.15
0.85
e1
2
0.30
0.18
0.05
0.00 0.05 0.1
DIMENSIONS (mm are the original dimensions)
SOT762-1 MO-241 - - -- - -
0.5
0.3
L
0.1
v
0.05
w
0 2.5 5 mm
scale
SOT762-1
DHVQFN14: plastic dual in-line compatible thermal enhanced very thin quad flat package; no leads;
14 terminals; body 2.5 x 3 x 0.85 mm
A(1)
max.
AA1c
detail X
y
y1C
e
L
Eh
Dh
e
e1
b
26
13 9
8
7
1
14
X
D
E
C
BA
02-10-17
03-01-27
terminal 1
index area
AC
CB
vM
wM
E(1)
Note
1. Plastic or metal protrusions of 0.075 mm maximum per side are not included.
D(1)
2003 Sep 04 14
Philips Semiconductors Product specification
Hex inverter 74LVC04A
DATA SHEET STATUS
Notes
1. Please consult the most recently issued data sheet before initiating or completing a design.
2. The product status of the device(s) described in this data sheet may have changed since this data sheet was
published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
3. For data sheets describing multiple type numbers, the highest-level product status determines the data sheet status.
LEVEL DATA SHEET
STATUS(1) PRODUCT
STATUS(2)(3) DEFINITION
I Objective data Development This data sheet contains data from the objective specification for product
development. Philips Semiconductors reserves the right to change the
specification in any manner without notice.
II Preliminary data Qualification This data sheet contains data from the preliminary specification.
Supplementary data will be published at a later date. Philips
Semiconductors reserves the right to change the specification without
notice, in order to improve the design and supply the best possible
product.
III Product data Production This data sheet contains data from the product specification. Philips
Semiconductors reserves the right to make changes at any time in order
to improve the design, manufacturing and supply. Relevant changes will
be communicated via a Customer Product/Process Change Notification
(CPCN).
DEFINITIONS
Short-form specification The data in a short-form
specification is extracted from a full data sheet with the
same type number and title. For detailed information see
the relevant data sheet or data handbook.
Limiting values definition Limiting values given are in
accordance with the Absolute Maximum Rating System
(IEC 60134). Stress above one or more of the limiting
values may cause permanent damage to the device.
These are stress ratings only and operation of the device
attheseoratany other conditions above thosegiveninthe
Characteristics sections of the specification is not implied.
Exposure to limiting values for extended periods may
affect device reliability.
Application information Applications that are
described herein for any of these products are for
illustrative purposes only. Philips Semiconductors make
norepresentationorwarrantythatsuchapplicationswillbe
suitable for the specified use without further testing or
modification.
DISCLAIMERS
Life support applications These products are not
designed for use in life support appliances, devices, or
systems where malfunction of these products can
reasonably be expected to result in personal injury. Philips
Semiconductorscustomersusingorsellingtheseproducts
for use in such applications do so at their own risk and
agree to fully indemnify Philips Semiconductors for any
damages resulting from such application.
Right to make changes Philips Semiconductors
reserves the right to make changes in the products -
including circuits, standard cells, and/or software -
described or contained herein in order to improve design
and/or performance. When the product is in full production
(status ‘Production’), relevant changes will be
communicated via a Customer Product/Process Change
Notification (CPCN). Philips Semiconductors assumes no
responsibility or liability for the use of any of these
products, conveys no licence or title under any patent,
copyright, or mask work right to these products, and
makes no representations or warranties that these
products are free from patent, copyright, or mask work
right infringement, unless otherwise specified.
© Koninklijke Philips Electronics N.V. 2003 SCA75
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Philips Semiconductors – a worldwide company
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Printed in The Netherlands R20/06/pp15 Date of release: 2003 Sep 04 Document order number: 9397 750 11928