RSR
SERIES
WIRE WOUND RESISTORS
SILICONE COATED TYPE
ower Resistor
Heavy Duty Industrial Applications
Silicone Coated P
EDGE WOUND
HTR
TYPE
POWER
RATING
at 70°C L
+3 d
+1
DIMENSIONS (mm)
W
+0.35
RESISTANCE
RANGE
min max
RR120A 120W 115.0 29.0 19.1 6.35 1.65 103/303 R10 4R0
RR120B 120W 115.0 29.0 19.1 8.0 4.3 8.0 4R0
RR150A 150W 140.0 19.1 6.35 5R0
RR150B 150W 140.0 19.1 8.0 5R0
RR200A 200W 200.0 7R0
RR200B 200W 200.0 7R0
RR300A 300W 250.0 40.5 24.0 104/304 10R
RR300B 300W 250.0 24.0 10R
RR400A 400W 300.0 24.0 14R
RR400B 400W 300.0 24.0 14R
RR500A 500W 300.0 27.0 18R
RR500B 500W 300.0 18R
7.0
103/303 R10
29.0 1.65 7.0 103/303 R10
29.0 4.3 8.0 103/303 R10
29.0 19.1 6.35 1.65 7.0 103/303 R10
29.0 19.1 8.0 4.3 8.0 103/303 R10
6.35 1.65 7.0 R10
40.5 8.0 4.3 8.0 104/304 R10
40.5 6.35 1.65 7.0 104/304 R10
40.5 8.0 4.3 8.0 104/304 R10
50.0 6.35 1.65 7.0 104/304 R10
50.0 27.0 8.0 4.3 8.0 104/304 R10
MOUNTING
HARDWARE
AVAILABLE
f Id
+0.3
H
[min]
D
+2
PHYSICAL CONFIGURATION
L
W
fId
D
d
H
TM
Nickel - Plated
Terminations
Flame Retardant
Silicone Coating
Alloy Resistance Strips,
Corrugated And
Wound Edge - Wise
On Ceramic Substrate
D-Dimensions given are indicative and could exceed tolerances given depending on resistance value being wound.
Resistor types suffixed with ‘A’ are compatible with Amp 250 connectors.
*
WIRE WOUND RESISTORS
SILICONE COATED TYPE
RSR
MOUNTING SPECIFICATIONS
Nut
Lockwasher
Screw
VERTICAL THRU-BOLT
Ceramic Centering
Washer
Core
Length (L)
Plus ‘X’
9.2mm (min)
HORIZONTAL THRU-BOLT
ZC
1.3mm (max) H
B
Y
ELECTRICAL DATA
TYPICAL APPLICATIONS
RESISTANCE TOLERANCE : + 10% [K] - [STD]; + 5% [J] - on request
In RSR Series, a corrugated alloy tape is wound edgewise or flat onto a ceramic tube which is coated with a
silicone resin.
This ribbed construction puts both sides of the resistive element in contact with air thus creating a convection
area four times greater than that obtained with normal wire wound resistors.
These resistors are designed primarily to withstand heavy overload surges upto max 7 times their rated
wattage for 10 to 15 seconds (max). This characteristic makes them most suitable for controlling motors
requiring high dissipation, low resistance values and high current capacity.
ORDERING INFORMATION
TYPE OF MOUNTING
HARDWARE
TOLERANCE
RESISTANCE VALUE
HTR TYPE
SERIES
RSR RR200B 3R0 K 103 or 303
Y
+1.0mm Z
+2mm H
+2mm
BRACKET
TYPE MOUNTING
SLOT
+1.0mm C
+2mm B
+2mm
103 31.5 30.0 35.0 7.1 x 11.11 22.22 53.98
104 48.0 31.5 56.88 7.1 x 11.11 23.22 82.0
X (APPROXIMATE)
(mm)
BRACKET
TYPE
303 15.0
304 16.0
TM