littelfuse.com© 2017 Littelfuse Revised: 03/14/17
Specifications are subject to change without notice.
59630 Sensor with Integral Float Actuator
Reed Sensors
Activation
Using sensor with float magnet orientated is illustrated
Float Sensor > 59630
Notes:
1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Breakdown Voltage - per MIL-STD-202, Method 301.
4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
5. This resistance value is for 300mm wire length. Resistance varies based on wire length.
6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II).
7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.
8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse.
Note:
Normally Open: contacts are open when float is down as shown in the De-activate
view. The contacts close when float is in upward position as shown on the left view.
Normally Closed: Contacts are closed when the float is in the down position.
The contacts open when float is in the upward position as shown in the left view.
Electrical Ratings
Contact Type Normally
Open
Normally Open
High Voltage
Change
Over
Normally
Closed
Switch Type 1 2 3 4
Contact Rating 1VA/Watt - max. 10 10 5 10
Voltage 4
Switching 2
Breakdown 3
Vdc - max.
Vac - max.
Vdc - min.
200
140
250
300
265
400
175
120
200
200
120
250
Current 4
Switching 2
Carry
Adc - max.
Aac - max.
Adc - max.
0.5
0.35
1.2
0.4
0.30
1.4
0.25
0.18
1.5
0.5
0.18
1.2
Resistance 5Contact, Initial
Insulation
Ω - max.
Ω - min.
0.2
1010
0.2
1010
0.2
109
0.2
1010
Capacitance Contact pF - typ. 0.3 0.2 0.3 0.3
Temperature Operating °C -40 to +105 -20 to +105 -40 to +105 -40 to +105
Product Characteristics
Operate Time 6ms - max. 1.0 1.0 3.0 3.0
Release Time 6ms - max. 1.0 1.0 3.0 3.0
Shock 711ms ½ sine G - max. 100 100 50 50
Vibration 750-2000 Hz G - max. 30 30 30 30
Activate
>5.00 (0.20)
De-activate
<10.0