1 Publication Order Number :
NSVP249SDSF3/D
© Semiconductor Components Industries, LLC, 2016
July 2016 - Rev. P1
www.onsemi.com
This document contains information on a new product. Specifications and information
herein are subject to change without notice.
NSVP249SDSF3
Advance Information
PIN Diode
Dual series PIN Diode for VHF, UHF and AGC
This PIN diode is designed to realize compact and efficient designs. Two
PIN diodes are incorporated in one SC-70 package. The use of dual PIN
diodes can reduce both system cost and board space. This PIN diode is
AEC-Q101 qualified and PPAP capable for automotive applications.
Features
Series connection of 2 elements in a small-size package
Small Interterminal Capacitance (C = 0.23 pF typ)
Small Forward Series Resistance (rs = 4.5 max)
Pb-Free, Halogen Free and RoHS Compliance
MCP3 package is pin-compatible with SC-70
AEC-Q101 qualified and PPAP capable
Typical Applications
Auto Gain Control for Radio
SPECIFICATIONS
ABSOLUTE MAXIMUM RATINGS at Ta = 25°C (Note 1)
Parameter Symbol Value Unit
Reverse Voltage VR 50 V
Forward Current IF 50 mA
Allowable Power Dissipation P 100 mW
Operating Junction and Storage Temp erature TJ, Tstg 55 to 125 C
Note 1 : Stresses exceeding those listed in the Maximum Ratings table ma y damage
the device. If any of these limits are exceeded, device functionality should not
be assumed, damage may occur and reliability may be affected.
ELECTRICAL CONNECTION
ORDERING INFORMATION
See detailed ordering and shipping
information on page 5 of this data sheet
50
V
, 50 m
A
rs = 4.5 max
PIN Diode
MARKING
3
12
1 : Anode
2 : Cathode
3 : Cathode / Anode
MCP3
3
2
1
NSVP249SDSF3
www.onsemi.com
2
ELECTRICAL CHARACTERISTICS at Ta = 25°C (Notes 2, 3)
Parameter Symbol Conditions Value Unit
min typ max
Reverse Voltage VR I
R = 10 µA 50 V
Reverse Current IR V
R = 50 V 0.1 µA
Forward Voltage VF I
F = 50 mA 0.92 V
Interterminal Capacitance C VR = 50 V, f = 1 MHz 0.23 pF
Series Resistance rs I
F = 10 mA, f = 100 MHz 4.5
Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted.
Product performance may not be indicated by the Electrical Characteristics if operated under different conditions..
Note 3 : The specifications shown above are for each individual diode.
NSVP249SDSF3
www.onsemi.com
3
NSVP249SDSF3
www.onsemi.com
4
PACKAGE DIMENSIONS
unit : mm
RECOMMENDED
SOLDERING FOOTPRINT
1 : Anode
2 : Cathode
3 : Cathode / Anode
SC-70 / MCP3
CASE 419AJ
ISSUE O
to
*1 : Lot indicaon
0.65 0.65
2.1
0.7
1.0
NSVP249SDSF3
www.onsemi.com
5
ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries
in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other
intellectual property. A listing of ON Semiconductor’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON
Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or
guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or
use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is
responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or
standards, regardless of any support or applications information provided by ON Semiconductor. “Typical parameters which may be provided in ON
Semiconduc tor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. Al l operating parameters,
including “Typicals must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its
patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support
systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for
implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall
indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and
expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or
unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an
Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
ORDERING INFORMATION
Device Marking Package Shipping
NSVP249SDSF3T1G GV
SC-70 / MCP3
Pb-Free / Halogen Free) 3,000 / Tape & Reel
† For information on tape and reel spe cification s, including part orientation a nd tape si zes, plea se refer to our Tape and Reel Packaging Speci fications
Brochure, BRD8011/D. http://www.onsemi.com/pub_link/Collateral/BRD8011-D.PDF