2SK4003 TOSHIBA Field Effect Transistor Silicon N-Channel MOS Type (-MOS VI) 2SK4003 Chopper Regulator, DC/DC Converter and Motor Drive Applications Unit: mm Low leakage current Enhancement mode : Vth = 2.0~4.0 V (VDS = 10 V, ID = 1 mA) MAX : RDS (ON) = 1.7 (typ.) : IDSS = 100 A (max) (VDS = 600 V) Low drain-source ON-resistance Maximum Ratings (Ta = 25C) Symbol Rating Unit Drain-source voltage VDSS 600 V Drain-gate voltage (RGS = 20 k) VDGR 600 V Gate-source voltage VGSS 30 V A DC (Note 1) ID 3 Pulse (Note 1) IDP 12 A Drain power dissipation (Tc = 25C) PD 20 W Single-pulse avalanche energy (Note 2) EAS 168 mJ Avalanche current IAR 6 A Repetitive avalanche energy (Note 3) EAR 2 mJ Drain current Channel temperature Tch 150 C Storage temperature range Tstg -55~150 C Symbol Max Unit Rth (ch-a) 125 C / W MAX 1 MAX MAX Characteristic JEDEC JEITA TOSHIBA 2-7J2B Weight: 0.36 g (typ.) Thermal Characteristics Characteristic Thermal resistance, channel to ambient Note 1: Ensure that the channel temperature does not exceed 150C. Note 2: VDD = 90 V, Tch = 25C (initial), L = 8.2 mH, RG = 25 , IAR = 6 A Note 3: Repetitive rating: pulse width limited by maximum channel temperature This transistor is an electrostatic-sensitive device. Handle with care. JEDEC JEITA SC-64 TOSHIBA 2-7J1B Weight: 0.36 g (typ.) 1 2005-01-21 2SK4003 Electrical Characteristics (Ta = 25C) Characteristic Gate leakage current Gate-source breakdown voltage Symbol Test Condition Min Typ. Max Unit IGSS VGS = 25 V, VDS = 0 V -- -- 10 A V (BR) GSS IG = 10 A, VDS = 0 V 30 -- -- V IDSS VDS = 600 V, VGS = 0 V -- -- 100 A V (BR) DSS ID = 10 mA, VGS = 0 V 600 -- -- V Vth VDS = 10 V, ID = 1 mA 2.0 -- 4.0 V Drain-source ON-resistance RDS (ON) VGS = 10 V, ID = 1.5 A -- 1.7 2.2 Forward transfer admittance |Yfs| VDS = 10 V, ID = 1.5 A 0.5 2.0 -- S Input capacitance Ciss -- 600 -- Drain cutoff current Drain-source breakdown voltage Gate threshold voltage Reverse transfer capacitance Crss Output capacitance Coss Rise time Turn-on time tr ton VDS = 25 V, VGS = 0 V, f = 1 MHz ID = 1.5 A 10 V VGS 0V Fall time tf Turn-off time toff Total gate charge (gate-source plus gate-drain) Qg Gate-source charge Qgs Gate-drain ("Miller") charge Qgd 7 -- 60 -- -- 16 -- -- 40 -- -- 18 -- -- 80 -- -- 15 -- -- 9 -- -- 6 -- RL= 133 50 Switching time VOUT -- -- VDD - 200 V Duty < = 1%, tw = 10 s VDD 400 V, VGS = 10 V, ID = 3 A pF ns nC Source-Drain Ratings and Characteristics (Ta = 25C) Characteristic Symbol Test Condition Min Typ. Max Unit Continuous drain reverse current (Note 1) IDR -- -- -- 3 A Pulse drain reverse current (Note 1) IDRP -- -- -- 12 A Forward voltage (diode) VDSF Reverse recovery time trr Reverse recovery charge Qrr IDR = 3 A, VGS = 0 V -- -- -1.7 V IDR = 3 A, VGS = 0 V dIDR / dt = 100 A / s -- 800 -- ns -- 5 -- C Marking K4003 Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2005-01-21 2SK4003 RESTRICTIONS ON PRODUCT USE 030619EAA * The information contained herein is subject to change without notice. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 3 2005-01-21