Introduces M310x Series LVPECL/LVDS/CML VCXO Featuring QiK ChipTM Technology Features: Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz - 20 MHz) Frequencies from 150 MHz to 1.4 GHz Designed for a short 2 week cycle time Applications: Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 Wireless base stations / WLAN / Gigabit Ethernet Avionic flight controls and military communications MtronPTI Corporate Headquarters 100 Douglas Avenue PO Box 630 Yankton, SD 57078-0630 1-800-762-8800 www.mtronpti.com Applications Note: The MtronPTI M310x series of voltage controlled cystal oscillators, featuring QiK ChipTM technology, provides for extremely low jitter of 0.50 ps RMS, typical at 622.08 MHz. For applications requiring low jitter, frequencies from 150 MHz to 1.4 GHz are available. LVPECL, LVDS, or CML compatible outputs, as well as operating voltage of 1.8 V, 2.5 V, and 3.3 V are also options on the M310x. The M310x is available with a standard APR of 50 ppm and 100 ppm, over the industrial operating temperature range of -40C to +85C. The M310x achieves this level of performance by utilizing an AT-cut crystal. An enable/disable function is also an available option on the M310x. An internal 0.01 F by-pass capacitor also assures optimum noise suppression on the supply voltage pad. The superior integrated jitter performance of 0.50 pS RMS, typical at 622.08 MHz, makes the M310x suitable for 10 Gig-E, broadband networks, network switches, SONET, SDH, SERDES, DWDM, FEC, WLAN, and OC-3 thru OC-192 systems. The M310x is available in a six-pad or nine-pad, 5x7x1.9 mm, leadless, ceramic, surface mount package (see page 4, N package drawing) that is RoHS and +260C reflow compatible, (no PCB traces should be located directly under the 5x7 product). The M310x oscillators are backward compatible to many of the existing products in the industry from Vectron, Epson, and others. For superior performance in a high frequency clock oscillator, the M310x is a logical choice for designers. The unique design architecture allows the M310x fast turn around on engineering design samples, as well as production quantities in 2 weeks or less. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 2 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Product Features Featuring QiK ChipTM Technology From order to ship in 2 weeks Superior Jitter Performance (less than 0.25 ps RMS, 12 kHz - 20 MHz) APR from 50 to 300ppm over industrial temperature range SAW replacement performance Frequencies from 150 MHz to 1.4 GHz Product Description The M310x series of VCXO's is designed with a hermetically sealed high precision AT cut quartz crystal, combined with our QiK ChipTM technology. This combination provides an industry setting 0.35 ps RMS jitter performance and excellent Phase Noise for your demanding circuit. The M310x is available in LVPECL, LVDS, or CML output and can be built to a variety of power requirements, 3.3, 2.5, and 1.8V. Tight thermal stability performance, broad frequency range, in a small 5x7 mm package, and the ability to build and provide product in approximately 2 weeks, gives the designer a quick, solid foundation to build a solution with. Product Applications Telecommunications such as SONET / SDH / DWDM / FEC / SERDES / OC-3 thru OC-192 Wireless base stations / WLAN / Gigabit Ethernet xDSL, Network Communications Avionic Flight Controls Military Communications Clock and Data Recovery Low Jitter Clock Generation Product Ordering Information MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 3 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Electrical Specifications Performance Characteristics PARAMETER Frequency Range Operating Temperature Storage Temperature Frequency Stability Aging 1st Year Thereafter (per year) Pullability/APR Gain Transfer Function Symbol F TA TS F/F Control Voltage Vc Linearity Modulation Bandwidth Input Impedance Supply Voltage fm Zin Vcc Input Current Load Icc Min. Typ. Max. 50 1400 (See ordering information) -55 +125 25 Units MHz -3 +3 -1 +1 (See ordering information) 90 135 180 0.18 0.90 1.62 0.25 1.25 2.25 0.30 1.65 3.0 1 5 10 500k 1M 1.71 1.8 1.89 2.375 2.5 2.625 3.135 3.3 3.465 125 ppm ppm 45 Output Skew Differential Voltage Vod Vod Common Mode Output Voltage Vcm Logic "1" Level Voh Logic "0" Level Rise/Fall Time Enable Function Vol Tr/Tf Start up Time Phase Jitter @ 622.08 MHz Environmental C ppm ppm/V ppm/V ppm/V V V V % KHz Ohms V V V mA Mechanical Shock Vibration Max Soldering Conditions Hermeticity Solderability J 250 0.7 20 15 20 350 0.95 1.2 Vcc 1.02 55 % 450 1.20 ps ps ps mV Vpp V LVDS V Vcc -1.63 V 0.23 0.35 ns 80% Vcc min or N/C: Output active 0.5V max: Output disables to high-Z 0.5V max or N/C: Output active 80% Vcc min: Output disables to high-Z 10 ms 0.25 See Note 2 For 50 ppm APR For 100 ppm APR For 200 ppm APR @ 1.8V Vcc @ 2.5V Vcc @ 3.3V Vcc Positive Monotonic -3 dB bandwidth @ DC LVDS/CML LVPECL/LVDS/CML See Note 3 LVPECL Waveform LVDS/CML Waveform LVPECL: Vdd-1.3 V LVDS: 1.25 V LVPECL CML LVDS LVDS CML 50 Ohms to (Vcc -2) Vdc 100 Ohm differential load Symmetry (Duty Cycle) Condition/Notes See Note 1 ps RMS LVPECL LVPECL @ 20/80% LVPECL, LVDS, CML Output Option G Output Option M Integrated 12 kHz - 20 MHz Per MIL-STD-202, Method 213, Condition C Per MIL-STD-202, Method 201 & 204 See solder profile, Figure 1 Per MIL-STD-202, Method 112 (1 x 10-8 atm cc/s of helium) Per MIL-STD-883, Method 203 Note 1: Contact factory for standard frequency availability over 945 MHz. Note 2: APR specification is inclusive of initial tolerance, deviation over temperature, shock, vibration, supply voltage, and aging for one year at 50C mean ambient temperature. Note 3: See Load Circuit Diagram in this Datasheet. Consult factory with nonstandard output load requirements. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 4 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Phase Noise Plot Output Waveform Output Waveform: LVDS/CML/PECL MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 5 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Product Dimension & Pinout Information 6 Pad Standard Option 9 Pad Option MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 6 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Handling Information Although protection circuitry has been designed into the M310x oscillator, proper precautions should be taken to avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation. ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industrywide standard has been adopted for the CDM, a standard HBM (resistance = 1500 , capacitance = 100 pF) is widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was obtained using these circuit parameters. Quality Parameters Part Marking Guide Line 1: Model Number Line 2: Frequency Line 3: Date Code Line 4: Pin 1 Indicator / MtronPTI MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 7 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Tape & Reel Specifications (all measurements are in mm) M310x A B C D E F G H I J K L 6.51 9.29 1.5 7.5 2.8 4 8/12 16 180-330 13 21 60-100 Standard Tape and Reel: 100 parts per reel Maximum Soldering Conditions Solder Conditions Note: Exceeding these limits may damage the device. MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 8 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Typical Test Circuit & Load Circuit Diagrams Product Revision Table Date 7/20/07 Revision A PCN Number Details of Revision 10118 IC Revision to improve phase noise and electrical performance For custom products or additional specifications contact our sales team at 800.762.8800 (toll free) or 605.665.9321 For more information on this product visit the MtronPTI website at www.mtronpti.com MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 9 M310x Series LVPECL/LVDS/CML Voltage Controlled Crystal Oscillator - 3.3/2.5/1.8 Volt - 5x7 mm Yankton Orlando PO Box 630 Yankton, SD 57078-0630 USA Phone: 605-665-9321 Toll Free: 800-762-8800 Fax: 605-665-1709 Email: SalesYKT@mtronpti.com 2525 Shader Rd Orlando, FL 32804 USA Phone: 407-298-2000 Fax: 407-293-2979 Email: SalesORL@mtronpti.com Connecticut Santa Clara 755 Main Street Suite 2B, Building 2 Monroe, CT 06470 USA Phone: 800.762.8800 Fax: 203.452.9435 Email: MilSales@mtronpti.com 1495 Franklin Street Santa Clara, CA 95050 USA Phone: 408.395.0700 Fax: 408.395.8074 Email: SalesCA@mtronpti.com Asia Pacific Europe 1104 Shanghai Industrial Investment Building 48-62 Hennessy Road Wanchai, Hong Kong, China Phone: 852-2866-8023 Fax: 852-2529-1822 Email: SalesHK@mtronpti.com The Netherlands Phone: 31-40-368-6818 Fax: 011-31-40-368-3501 Email: SalesEU@mtronpti.com MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application. Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact us for your application specific requirements: MtronPTI 1-800-762-8800. 10