Single-Mode LC XFP Transceiver For 10Gigabit Ethernet & 10G Fibre Channel ES1052-LPTTA Preliminary Data Sheet Features * * * * * * * * * * * * * 1310nm DFB laser Class 1 Laser Safety Conformance Links up to 10km Compliant with specifications for IEEE-802.3ae 10Gigabit Ethernet (10GBASE-L) at 10.3125 Gbps and 10G Fibre Channel at 10.51875Gbps XFI data input and receiver output levels LVTTL (open collector) digital diagnostic monitoring signals Industry standard duplex LC optical connector Operates with 9/125 m single mode optical fibers Conforms to 10Gbps Small Form-factor Pluggable (XFP) Multi-Source Agreement Compatible with industry standard XFP electrical connector & cage Hot pluggable EEPROM with serial ID functionality 2.5W power dissipation Product Description The ES1052-LPTTA from E2O Communications is a hot pluggable duplex-LC transceiver designed for use in 10Gigabit Ethernet applications. The transceiver is compatible with the industry standard XFP connector and cage and conforms to the 10Gbps Small Form-factor Pluggable (XFP) multi-source agreement (MSA). E2O Communications, Inc. The transceiver consists of optical subassemblies for both the transmitter and the receiver, and an electrical subassembly. All are packaged together with a top metal cover and bottom shield. The optical subassembly consists of 2 parts. The transmitter side has a high-performance 1310-nm DFB laser and back facet monitor. The receiver side has a high speed InGaAs PIN type detector and a preamplifier. All ES1052-LPTTA transceivers also include state-ofthe-art circuitry designed to restore signal quality of the high speed 10Gbps serial data inputs and outputs. This circuitry ensures that the serial data can be transmitted over as much as 200mm (8") of FR-4 printed circuit board from the host with no adverse effects. With enhanced FR-4 (NELCO) this can be increased to 300mm (12"). A serial EEPROM in the transceiver allows the user to access transceiver monitoring and configuration data via the 2-wire XFP Management Interface. The user can monitor transceiver parameters including module temperature, power supply voltage, laser bias current, laser power and received optical power. Alarms and Warnings are provided when the monitored parameters exceed pre-defined threshold values which are held in lower memory. Details of the Serial Identification Protocol is contained in the XFP Multi-Source Agreement. Electromagnetic Interference (EMI) & Immunity The ES1052-LPTTA transceivers, with their shielded design, have reduced emissions to assist the designer in the management of the overall equipment EMI performance. The ES1052-LPTTA transceiver has been designed to provide good immunity to radio-frequency electromagnetic fields. Key components to achieve the good electromagnetic performance (EMC) are the internal and bottom shields, the metal cover, and the XFP cage which includes an EMI gasket on the front. Eye Safety The ES1052-LPTTA 1300-nm laser-based transceivers have been designed to meet Class 1 eye safety. They conform to FDA 21CFR1040.10 and 1040.11 and IEC 60825-1. 26679 W. Agoura Road Calabasas, CA 91302 (818) 466-2800 (818) 878-9163 FAX www. e2oinc.com Page 1 11/15/2002 Single-Mode LC XFP Transceiver For 10Gigabit Ethernet & 10G Fibre Channel Mechanical Specs: Figure 1: XFP Transceiver Package Outline NOTE: Dimensions in mm. E2O Communications, Inc. reserves the right to make changes in product design, features, capabilities, function, or specifications at any time without notice. Information supplied by E2O Communications, Inc. is believed to be accurate and reliable at the time of release. No responsibility is assumed by E2O Communications, Inc. for its use nor for any infringements of third parties, which may result from its use. No license is granted by implication or otherwise under any patent right of E2O Communications, Inc. E2O Communications, Inc. 26679 W. Agoura Road Calabasas, CA 91302 (818) 466-2800 (818) 878-9163 FAX www. e2oinc.com Page 2 11/15/2002