STPS340-Y Automotive power Schottky rectifier Datasheet production data Features Very small conduction losses Negligible switching losses Low forward voltage drop Low thermal resistance Extremely fast switching Surface mounted device Avalanche capability specified AEC-Q101 qualified A A K K SMB STPS340UY Table 1. Description This single chip Schottky rectifier is suited for switch mode power supplies and high frequency DC to DC converters. SMC STPS340SY Device summary IF(AV) 3A VRRM 40 V Tj (max) 150 C VF (max) 0.57 V Packaged in SMB, and SMC, this device is intended for use in low and medium voltage operation, high frequency inverters, free wheeling and polarity protection applications where low switching losses are required for automotive applications. October 2012 This is information on a product in full production. Doc ID 17390 Rev 1 1/8 www.st.com 8 Characteristics 1 STPS340-Y Characteristics Table 2. Absolute ratings (limiting values) Symbol Unit Repetitive peak reverse voltage 40 V IF(RMS) Forward rms current 6 A SMB TL = 95 C = 0.5 3 A SMC TL = 105 C = 0.5 3 A Surge non repetitive forward current tp =10 ms sinusoidal 75 A Repetitive peak avalanche power tp = 1 s Tj = 25 C 1300 W Storage temperature range -65 to + 150 C Operating junction temperature (1) range -40 to +150 C Value Unit IF(AV) Average forward current IFSM PARM Tj 1 dPtot < condition to avoid thermal runaway for a diode on its own heatsink Rth(j-a) dTj Table 3. Thermal resistance Symbol Rth(j-l) Table 4. Symbol IR(1) Parameter VF(1) SMB 25 SMC 20 Junction to lead C/W Static electrical characteristics Parameter Reverse leakage current Test conditions Tj = 25 C Tj = 125 C Tj = 25 C Forward voltage drop Tj = 125 C Tj = 25 C Tj = 125 C Min. VR = VRRM Typ. 2 Max. Unit 20 A 10 mA 0.63 IF = 3 A 0.52 0.57 V 0.84 IF = 6 A 1. Pulse test: tp = 380 s, < 2% To evaluate the conduction losses use the following equation: P = 0.42 x IF(AV) + 0.050 IF2(RMS) 2/8 Value VRRM Tstg 1. Parameter Doc ID 17390 Rev 1 0.63 0.72 STPS340-Y Characteristics Figure 1. Average forward power dissipation Figure 2. versus average forward current (per diode) Average forward current versus ambient temperature ( = 0.5, per diode) IF(AV)(A) PF(AV)(W) 3.5 2.5 = 0.05 = 0.1 = 0.2 = 0.5 Rth(j-a)=Rth(j-l) 3.0 2.0 =1 2.5 SMB / SMC 1.5 Rth(j-a)=65C/W 2.0 1.5 1.0 1.0 T 0.5 T 0.5 IF(AV)(A) =tp/T 0.0 0.0 0.5 1.0 Figure 3. 1.5 2.0 2.5 3.0 =tp/T tp 0.0 3.5 4.0 Non repetitive surge peak forward current versus overload duration (maximum values) (SMB) 0 25 Figure 4. IM(A) Tamb(C) tp 50 75 100 125 150 Non repetitive surge peak forward current versus overload duration (maximum values) (SMC) IM(A) 10 12 SMB SMC 11 9 10 8 9 7 8 Ta=25C 6 Ta=25C 7 5 6 Ta=75C Ta=75C 5 4 4 3 3 2 Ta=125C IM t 1 t(s) =0.5 0 Ta=125C IM 2 t 1 t(s) =0.5 0 1.E-03 Figure 5. 1.E-02 1.E-01 1.E+00 Normalized avalanche power derating versus pulse duration 1.E-03 Figure 6. PARM(tp) PARM(1s) 1.E-02 1.E-01 1.E+00 Normalized avalanche power derating versus junction temperature PARM(Tj) PARM(25C) 1 1.2 1 0.1 0.8 0.6 0.4 0.01 0.2 0.001 0.01 Tj(C) tp(s) 0.1 1 0 10 100 1000 25 Doc ID 17390 Rev 1 50 75 100 125 150 3/8 Characteristics Figure 7. STPS340-Y Relative variation of thermal impedance junction to ambient versus pulse duration (SMB) Figure 8. Zth(j-a)/Rth(j-a) Relative variation of thermal impedance junction to ambient versus pulse duration (SMC) Zth(j-a)/Rth(j-a) 1.0 1.0 0.9 0.9 SMB 0.8 0.8 0.7 0.7 0.6 0.6 0.5 0.5 0.4 0.4 0.3 SMC 0.3 T 0.2 T 0.2 Single pulse Single pulse 0.1 0.1 tp(s) =tp/T 0.0 1.E-02 1.E-01 Figure 9. 1.E+00 1.E+01 tp 1.E+02 tp(s) =tp/T 0.0 1.E+03 Reverse leakage current versus reverse voltage applied (typical values) 1.E-02 1.E-01 1.E+00 1.E+01 tp 1.E+02 1.E+03 Figure 10. Junction capacitance versus reverse voltage applied (typical values) IR(mA) C(pF) 1.E+01 1000 Tj=150C F=1MHz VOSC=30mVRMS Tj=25C Tj=125C 1.E+00 Tj=100C 1.E-01 Tj=75C 100 1.E-02 Tj=25C 1.E-03 VR(V) VR(V) 1.E-04 0 5 10 15 10 20 25 30 35 Figure 11. Forward voltage drop versus forward current 10.00 1 40 10 100 Figure 12. Thermal resistance junction to ambient versus copper surface under each lead IFM(A) Rth(j-a)(C/W) 110 Printed circuit board FR4 copper thickness = 35 m 100 90 Tj=125C (Maximum values) SMB / SMC 80 1.00 70 60 Tj=125C (Typical values) 50 0.10 40 Tj=25C (Maximum values) 30 20 10 VFM(V) 0.01 0.0 4/8 SCU(cm) 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 0.0 Doc ID 17390 Rev 1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 STPS340-Y 2 Package information Package information Epoxy meets UL94, V0 Band indicates cathode on SMB and SMC In order to meet environmental requirements, ST offers these devices in different grades of ECOPACK(R) packages, depending on their level of environmental compliance. ECOPACK(R) specifications, grade definitions and product status are available at: www.st.com. ECOPACK(R) is an ST trademark. Table 5. SMB dimensions Dimensions Ref. Millimeters Inches E1 D Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 1.95 2.20 0.077 0.087 c 0.15 0.40 0.006 0.016 E 5.10 5.60 0.201 0.220 E1 4.05 4.60 0.159 0.181 D 3.30 3.95 0.130 0.156 L 0.75 1.50 0.030 0.059 E A1 A2 C L b Figure 13. SMB footprint (dimensions in mm) 1.62 2.60 1.62 2.18 5.84 Doc ID 17390 Rev 1 5/8 Package information Table 6. STPS340-Y SMC package dimensions Dimensions Ref Millimeters Inches E1 Min. Max. Min. Max. A1 1.90 2.45 0.075 0.096 A2 0.05 0.20 0.002 0.008 b 2.90 3.2 0.114 0.126 c 0.15 0.41 0.006 0.016 E 7.75 8.15 0.305 0.321 E1 6.60 7.15 0.260 0.281 E2 4.40 4.70 0.173 0.185 D 5.55 6.25 0.218 0.246 L 0.75 1.40 0.030 0.063 D E A1 C A2 E2 L b Figure 14. Footprint dimensions (in millimeters) 1.54 5.03 1.54 3.15 8.11 6/8 Doc ID 17390 Rev 1 STPS340-Y 3 Ordering information Ordering information Table 7. 4 Ordering information Order code Marking Package Weight STPS340UY U34Y SMB 0.107 g STPS340SY S34Y SMC 0.243 g Base qty Delivery mode 2500 Tape and reel Revision history Table 8. Document revision history Date Revision 24-Oct-2012 1 Changes First issue. Doc ID 17390 Rev 1 7/8 STPS340-Y Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY TWO AUTHORIZED ST REPRESENTATIVES, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2012 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 8/8 Doc ID 17390 Rev 1 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: STMicroelectronics: STPS340SY STPS340UY