IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary Distinctive features and specifications Rear mounting for easier installation UG1006-A Momentary metal models Fixed or variable panel thickness Screw version available up to 4A Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - Gold plated silver contacts (code 4) : 200mA 48VDC - 200mA 250VAC - Silver contacts (code 2) - screw terminals : 2A 250VAC - 4A 48VDC * Electrical life at full load : 500.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 2,1V 2,3V Yellow (L0Y) 20mA 2,1V 2,3V Green (L0G) 20mA 2,1V 2,3V Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V * Panel thickness : - IZM : 3 mm (.118) max. - IZN : 4 mm (.157) max. * Total travel : 1,8 mm (.070) +/- 0,3 mm * Typical operating force : 6N +/- 2N * Mechanical life : 1.000.000 cycles * Torque : IZN : 1 Nm max. IZM : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. MATERIALS * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : brass, nickel plated * Contacts : 4 : silver, gold plated 2 : silver (screw terminals) * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING 27.00 (1.063) 4.00 Maxi (.157MAX) 27.00 (1.063) O16.20 (.637DIA) (.118MAX) 3.00 Maxi Flat seal O-ring O16.20 (.637DIA) 1 2 IZM (adjustable hex nut) B-36 IZN (fixed hex nut) www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary Overview IZ Electrical function Model SERIES M N Metal, variable panel thickness Metal, fixed panel thickness 3 Actuator shape R P Actuator colour 1 B 2 3 5 6 7 8 9 A Blue Dark blue Black Green Yellow Red White Bright chrome Orange Satin chrome Normally open (NO) Round, curved Round, flat Bushing & bezel finish N Nickel plated Solder lugs Flying leads Straight PC Quick-connect (non-illuminated) V Screw (non-illuminated & N model only) S F P Z 4 2 Silver, gold plated Silver (screw term.) B LED colour Blank L0S L0Y L0G L0B L0W Other : on request. Contacts Terminals Non-illum. Super red Yellow Green Blue White ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : - IZM : 1 castellated nickel plated brass nut U6915 + 1 silicone flat seal + 1 hex nut 19 mm (.748) across flats U4116. - IZN : 1 castellated nickel plated brass nut U6915 + 1 O-ring Packaging unit : 25 pieces for flying lead models - 40 pieces for other models APEM www.apem.com B-37 IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary For variable panel thickness : IZM (-) Non-illuminated 2.40 (.094) 8.70 (.342) 1.00 (.039) (+) 2.80 (.110) Illuminated 1.20 (.047) MODEL STRUCTURE Plunger marking available on IZMP models (symbol 10 mm max.). On request. Illuminated - solder lug terminals 12.00 (.472) 6.20 (.244) EPOXY NO Normally Open NO LED Cathode (-) 2.00 (.078) O3.30 (.113DIA) 6.10 (.240) Flat actuator IZMP3S4 Normally Open 5.20 (.204) Curved actuator IZMR3S4 2.00 (.078) O16.00x100SI (.630DIAx100IS) O12.00 (.472DIA) 2.00 (.078) Also available with straight PC terminals : IZM*3P4. LED colour is indicated by the bottom of the switch. 12.00 (.472) 15.20maxi. (.598MAX.) Flat actuator IZMP3F4 Normally Open O10.50 (.413DIA) Normally Open O3.30 (.113DIA) 50010 (19.68.393) Curved actuator IZMR3F4 O16.00x100SI (.630DIAx100IS) O12.00 (.472DIA) 2.00 (.078) Illuminated - flying lead terminals Wire colours : black : NO contact, red : LED anode (+), blue : LED cathode (-) O16.00x100SI (.630DIAx100IS) Normally Open Flat actuator IZMP3S4 Normally Open EPOXY 2.65 (.104) 2.80 (.110) Curved actuator IZMR3S4 12.00 (.472) O12.00 (.472DIA) 2.00 (.078) Non-illuminated - solder lug terminals 3.20 (.126) B 4.55 (.179) 5.20 (.204) * Five LED colours * Tin plated LED terminals * Gold plated contacts Also available with straight PC terminals : IZM*3P4 and quick-connect terminals : IZM*3Z4. For non-illuminated FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. B-38 www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary For fixed panel thickness : IZN * Five LED colours * Tin plated LED terminals Quick-connect Z Non-illuminated (+) 2.00X0.40 (.078X.015) 7.10 (.279) 1.00X0.40 (.039X.015) 3.60 (.141) 3.60 (.141) (-) 1.00 (.039) 2.40 (.094) Straight P 1.50 (.059) Solder lug S 1.20 (.047) 2.80X0.50 (.110X.019) Illuminated MODEL STRUCTURE Plunger marking available on IZNP models (symbol 10 mm max.). On request. O16.00x100SI (.630DIAx100IS) 20.00 (.787) O12.00 (.472DIA) 2.00 (.078) Illuminated - solder lug terminals 8.70 (.342) Normally Open NO Normally Open NO LED Cathode (-) 2.00 (.078) 2.00 (.078) Also available with straight PC terminals : IZN*3P4. LED colour is indicated by the bottom of the switch. Illuminated - sealed flying lead terminals O3.30 (.113DIA) 3.60 (.141) O16.00x100SI (.630DIAx100IS) 20.00 (.787) O12.00 (.472DIA) 2.00 (.078) Flat actuator IZNP3S4 11.00 (.433) O18.00 (.708DIA) 4.50 (.177) Curved actuator IZNR3S4 4.00 (.157) GOLD PLATED CONTACTS 8.70 (.342) Curved actuator IZNR3F4 4.00 (.157) GOLD PLATED CONTACTS Normally Open Normally Open Wire colours : black : NO contact, red : LED anode (+), blue : LED cathode (-) Non-illuminated - solder lug terminals O16.00x100SI (.630DIAx100IS) 2.00 (.078) 8.70 (.342) 4.00 (.157) Normally Open 11.00 (.433) O18.00 (.708DIA) Normally Open Also available with straight PC terminals : IZN*3P4 and quick-connect terminals : IZN*3Z4. 3.60 (.141) Flat actuator IZNP3S4 20.00 (.787) O12.00 (.472DIA) GOLD PLATED CONTACTS Curved actuator IZNR3S4 O3.30 (.113DIA) 50010 (19.68.393) Flat actuator IZNP3F4 18.50maxi. (.728MAX. ) O18.00 (.708DIA) 2.00 (.078) For non-illuminated FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. APEM www.apem.com B-39 B IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - momentary For fixed panel thickness : IZN - options Non-illuminated - screw terminals 11.00 (.433) O18.00 (.708DIA) 8.70 (.342) Normally open Normally open 7.00 Maxi (.275 MAX) Flat actuator IZNP3V2 4.00 (.157) SILVER CONTACTS Curved actuator IZNR3V2 20.00 (.787) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) B ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOUR LED COLOUR N : nickel plated (standard) Other : on request. Blank : non-illuminated L0S : super red - L0Y : yellow - L0G : green L0B : blue - L0W : white B-40 www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching Distinctive features and specifications Rear mounting for easier installation UG1006-A Latching action metal models Fixed or variable panel thickness Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Robustness (non-illuminated) : IK06 according to EN 50102 (1 joule) * Operating temperature : -40C to +85C * Panel thickness : - IZM : 3 mm (.118) max. - IZN : 4 mm (.157) max. * Total travel : 2,5 mm (.098) +/-0,3 mm * Typical operating force : 5N +/- 2N * Mechanical life : 200.000 cycles * Torque : IZN : 1 Nm max. IZM : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : 100mA 24VDC - 200.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms between terminals 1.000 Vrms between terminals and frame MATERIALS * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : brass, nickel plated * Contacts : silver, gold plated * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 1,95V 1,95V Yellow (L0Y) 20mA 2V 2,05V Green (L0G) 20mA 3,2V 3,70V Blue (L0B) 20mA 3,2V 4V A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING 27.00 (1.063) 4.00 Maxi (.157MAX) 27.00 (1.063) O16.20 (.637DIA) (.118MAX) 3.00 Maxi Flat seal O-ring O16.20 (.637DIA) 1 2 IZM (adjustable hex nut) APEM IZN (fixed hex nut) www.apem.com B-41 IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching Overview IZ Electrical function Model SERIES M N Metal, variable panel thickness Metal, fixed panel thickness 1 Actuator colour 1 B 2 3 5 6 7 8 9 A Blue Dark blue Black Green Yellow Red White Bright chrome Orange Satin chrome OFF - ON Solder lugs Flying leads Straight PC Quick-connect Contacts 4 Silver, gold plated Round, curved Round, flat Bushing & bezel finish N S F P Z Actuator shape R P B Terminals Nickel plated (standard) Other : on request. LED colour Blank L0S L0Y L0G L0B Non-illum. Super red Yellow Green Blue ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. : please note that not all combinations of above numbers are available. Refer to the following pages for further information. NOTICE Mounting accessories : Standard hardware supplied : - IZN : 1 castellated nickel plated brass nut U6915 + 1 O-ring - IZM : 1 castellated nickel plated brass nut U6915 + 1 silicone flat seal + 1 hex nut 19 mm (.748) across flats U4116. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models B-42 www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching For variable panel thickness : IZM OFF (-) (+) 2.80 (.110) ON 1.10X0.50 (.043X.019) 8.40 (.330) 2.40 (.094) 4.20 (.165) Quick-connect Z 3.40 (.133) (+) 3.20 (.125) 1.40 (.055) (-) Straight P Solder lug S 2.30 (.090) * Four LED colours * Tin plated LED terminals * Gold plated contacts 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Plunger marking available on IZMP models (symbol 10 mm max.). On request. Illuminated - solder lug terminals 2.00 (.078) O16.00x100SI (.630DIAx100IS) Curved actuator IZMR1S4 12.70 (.500) O12.00 (.472DIA) OFF - ON 0.50x0.60 (.019x.023) 5.08 (.200) Also available with straight PC terminals : IZM*1P4 & quick-connect terminals : IZM*1Z4. Illuminated - flying lead terminals 2.00 (.078) O16.00x100SI (.630DIAx100IS) 12.70 (.500) O12.00 (.472DIA) Curved actuator IZMR1F4 OFF - ON O13.00 (.511DIA) 12.00 (.472) OFF - ON Wire colours : black : contact, red : LED anode(+), blue : LED cathode (-) Non-illuminated - solder lug terminals 2.00 (.078) O16.00x100SI (.630DIAx100IS) O12.00 (.472DIA) OFF - ON 12.70 (.500) Curved actuator IZMR1S4 O3.30 (.113DIA) 50010 (19.68.393) Flat actuator IZMP1F4 O3.30 (.113DIA) 3.20 (.125) 12.00 (.472) OFF - ON 16.00maxi. (.630MAX.) Flat actuator IZMP1S4 10.00 (.393) O13.00 (.511DIA) 12.00 (.472) OFF - ON 5.08 Also available with straight PC terminals : (.200) IZM*1P4 & quick-connect terminals : IZM*1Z4. Also available with straight PC terminals : IZM*1P4 & quick-connect 3.20 (.125) Flat actuator IZMP1S4 10.00 (.393) O13.00 (.511DIA) For FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. APEM www.apem.com B-43 B IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching For fixed panel thickness : IZN OFF 2.80 (.110) 1.10X0.50 (.043X.019) 8.40 (.330) 2.40 (.094) 4.20 (.165) (+) ON Quick-connect Z 3.40 (.133) (-) 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Plunger marking available on IZNP models (symbol 10 mm max.). On request. Illuminated - solder lug terminals 20.00 (.787) 8.70 (.342) OFF - ON OFF - ON O3.30 (.113DIA) Illuminated - flying lead terminals O16.00x100SI (.630DIAx100IS) 20.00 (.787) 8.70 (.342) OFF - ON OFF - ON Wire colours : black : contact, red : LED anode(+), blue : LED cathode (-) Non-illuminated - solder lug terminals O16.00x100SI (.630DIAx100IS) 20.00 (.787) O12.00 (.472DIA) Curved actuator IZNR1S4 OFF - ON 14.00 (.551) O13.00 (.511DIA) Flat actuator IZNP1S4 O3.30 (.113DIA) 50010 (19.68.393) Flat actuator IZNP1F4 20.00maxi. (.787MAX.) O13.00 (.511DIA) 2.00 (.078) Curved actuator IZNR1F4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Also available with straight PC terminals : IZN*1P4 & quick-connect terminals : IZN*1Z4. 3.20 (.125) 0.50x0.60 (.019x.023) 5.08 (.200) 8.70 (.342) Flat actuator IZNP1S4 14.00 (.551) O13.00 (.511DIA) OFF - ON Also available with straight PC terminals : IZN*1P4 & quick-connect terminals : IZN*1Z4. 5.08 (.200) 3.20 (.125) Curved actuator IZNR1S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) 4.00 (.157) B (+) 3.20 (.125) 1.40 (.055) (-) Straight P Solder lug S 2.30 (.090) * Four LED colours * Tin plated LED terminals * Gold plated contacts For FLYING LEAD versions, refer to illuminated models above. Non-illuminated have 2 wires only. B-44 www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - metal - latching Options ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOUR LED COLOUR N : nickel plated (standard) Other : on request. Blank : non-illuminated L0S : super red - L0Y : yellow - L0G : green L0B : blue APEM www.apem.com B B-45 IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Distinctive features and specifications Rear mounting for easier installation UG1006-A Momentary models Screw version available up to 4A Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : 3 mm (.118) max. * Total travel : 1,8 mm (.070) +/- 0,3 mm * Typical operating force : 6N +/- 2N * Mechanical life : 1.000.000 cycles * Torque : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS * Max. current/voltage rating with resistive load : - Gold plated silver contacts (code 4) : 200mA 48VDC - 200mA 250VAC - Silver contacts (code 2) - screw terminals : 2A 250VAC - 4A 48VDC * Electrical life at full load : 500.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.000 Vrms 50 Hz LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 2,1V 2,3V Yellow (L0Y) 20mA 2,1V 2,3V Green (L0G) 20mA 2,1V 2,3V Blue (L0B) 20mA 3,2V 3,8V White (L0W) 20mA 3,35V 4,25V MATERIALS * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : polyamide * Contacts : 4 : silver, gold plated 2 : silver (screw terminals) * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING Flat seal (.118MAX) (.633DIA) 22.00 (.866) 3.00 Maxi 22.00 (.866) O16.10 O16.10 (.633DIA) 1 15.10 (.594) B-46 www.apem.com 15.10 (.594) APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Overview IZ Electrical function Model SERIES P Plastic 3 Normally open (NO) Actuator shape Round, curved Round, flat R P Actuator colour 1 B 2 3 5 6 7 8 9 A Blue Dark blue Black Green Yellow Red White Bright chrome Orange Satin chrome Bushing & bezel finish 2 Black (standard) Terminals Solder lugs Flying leads Straight PC Quick-connect (non-illuminated) V Screw (non-illuminated) S F P Z 4 2 Silver, gold plated Silver (screw term.) B LED colour Blank L0S L0Y L0G L0B L0W Other : on request. Contacts Non-illum. Super red Yellow Green Blue White ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 castellated black plastic nut U4249 and 1 silicone flat seal. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models APEM www.apem.com B-47 IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Illuminated * Five LED colours * Tin plated LED terminals * Gold plated contacts LED Cathode (-) LED Cathode (-) Plunger marking available on IZPP models (symbol 10 mm max.). On request. O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) NO Also available with straight PC terminals : IZP*3P4. LED colour is indicated by the bottom of the switch. 2.00 (.078) 2.00 (.078) Flat Flying lead terminals - momentary NO O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) 4.00 (.157) O12.00 (.472DIA) Normally Open Normally Open 50010 (19.68.393) Flat actuator IZPP3F4 15.00/Plat (.590/Flat) 18.50maxi. (.728MAX. ) O15.00 (.590DIA) 4.50 (.177) Normally Open LED Cathode (-) Curved actuator IZPR3F4 8.70 (.342) 11.00 (.433) O15.00 (.590DIA) 2.00 (.078) Flat actuator IZPP3S4 Normally Open 15.00/Plat (.590/Flat) 8.70 (.342) Curved actuator IZPR3S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Flat Solder lug terminals 3.60 (.141) B MODEL STRUCTURE Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode (-) ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOUR LED COLOUR 2 : black (standard) Other : on request. L0S : super red - L0Y : yellow - L0G : green L0B : blue - L0W : white B-48 www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - momentary Non-illuminated Straight P Quick-connect Z 2.00X0.40 (.078X.015) 2.40 (.094) 7.10 (.279) 3.60 (.141) 1.00 (.039) 3.60 (.141) 1.50 (.059) Solder lug S 1.00X0.40 (.039X.015) 1.20 (.047) 2.80X0.50 (.110X.019) MODEL STRUCTURE Plunger marking available on IZPP models (symbol 12 mm max.). On request. Flat Solder lug terminals - gold plated contacts O20.00 (.787DIA) Also available with straight PC terminals : IZP*3P4 and quick-connect terminals : IZP*3Z4. Sealed flying lead terminals - gold plated contacts 2.00 (.078) Flat O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) 15.00/Plat (.590/Flat) Normally Open 12.00maxi (.472MAX.) O15.00 (.590DIA) Normally Open 50010 (19.68.393) Flat actuator IZPP3F4 4.00 (.157) O12.00 (.472DIA) Curved actuator IZPR3F4 8.70 (.342) 11.00 (.433) O15.00 (.590DIA) 2.00 (.078) Normally Open 15.00/Plat (.590/Flat) 8.70 (.342) Flat actuator IZPP3S4 Normally Open 3.60 (.141) Curved actuator IZPR3S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) Normally open O15.00 (.590DIA) Normally open 7.00 Maxi (.275 MAX) Flat actuator IZPP3V2 4.00 (.157) Curved actuator IZPR3V2 15.00/Plat (.590/Flat) 8.70 (.342) O20.00 (.787DIA) O12.00 (.472DIA) 11.00 (.433) O16.00x100SI (.630DIAx100IS) 2.00 (.078) Flat Screw terminals - silver contacts Actuator colour and bushing/bezel colour : select the desired codes on previous page. APEM www.apem.com B-49 B IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Distinctive features and specifications UG1006-A Rear mounting for easier installation Latching action models Sealed to IP67 Illuminated or non-illuminated Flat actuator for optional marking B ENVIRONMENTAL SPECIFICATIONS GENERAL SPECIFICATIONS * Front panel sealing : IP67 according to IEC 60529 * Shock resistance : 100 g according to IEC 512-4, test 6c * Vibration resistance : 10-500Hz - 10 g according to IEC 512-4, test 6d * Salt spray : IEC 512-6, test 11f * Operating temperature : -40C to +85C * Panel thickness : 3 mm (.118) max. * Total travel : 2,5 mm (.098) +/- 0,3 mm * Typical operating force : 5N +/- 2N * Mechanical life : 200.000 cycles * Torque : 0,7 Nm max. applied to nut * Soldering : 320C max. for 3 sec. ELECTRICAL SPECIFICATIONS MATERIALS * Max. current/voltage rating with resistive load : 100mA 24VDC - 200.000 cycles * Initial contact resistance : 100 m max. * Insulation resistance : 1 G min. at 500VDC * Dielectric strength : 1.500 Vrms between terminals LED COMPONENT SPECIFICATIONS LED colour Forward current Super red (L0S) 20mA Typ. forward voltage Max. forward voltage 1,95V 1,95V Yellow (L0Y) 20mA 2V 2,05V Green (L0G) 20mA 3,2V 3,70V Blue (L0B) 20mA 3,2V 4V * Case : thermoplastic UL94-V0 * Plunger : polyamide * Bushing/bezel : polyamide * Contacts : silver, gold plated * Multi-wire lead AWG20, section 0,6 mm2 * LED wire : AWG26, section 0,12 mm2 * Lens : polycarbonate * Terminal seal : epoxy A resistor must be series-connected by the user. Resistor value = supply voltage - LED forward voltage LED forward current On flying lead versions, the LED resistor can be integrated by APEM on request. PANEL CUT-OUT MATRIX MOUNTING Flat seal (.118MAX) (.633DIA) 22.00 (.866) 3.00 Maxi 22.00 (.866) O16.10 O16.10 (.633DIA) 1 15.10 (.594) B-50 www.apem.com 15.10 (.594) APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Distinctive features and specifications IZ Electrical function Model SERIES P Plastic 1 Terminals ON - OFF S F P Z Actuator shape 1 B 2 3 5 6 7 8 9 A Blue Dark blue Black Green Yellow Red White Bright chrome Orange Satin chrome 4 Silver, gold plated Round, curved Round, flat R P Actuator colour Solder lugs Flying leads Straight PC Quick-connect Contacts B Bushing & bezel finish 2 Black (standard) LED colour Blank L0S L0Y L0G L0B Other : on request. Non-illum. Super red Yellow Green Blue ABOUT THIS SERIES On the following pages, you will find successively : model structure of switches and options in the same order as in above chart Dimensions : first dimensions are in mm while inches are shown as bracketted numbers. NOTICE : please note that not all combinations of above numbers are available. Refer to the following pages for further information. Mounting accessories : Standard hardware supplied : 1 castellated black plastic nut U4249 and 1 silicone flat seal. Packaging unit : 25 pieces for flying lead models - 40 pieces for other models APEM www.apem.com B-51 IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Illuminated OFF 2.80 (.110) ON 8.40 (.330) 2.40 (.094) 4.20 (.165) 1.10X0.50 (.043X.019) 1.20 (.047) 2.80 (.110) MODEL STRUCTURE Plunger marking available on IZPP models (symbol 10 mm max.). On request. Flat O20.00 (.787DIA) 14.00 (.551) O15.00 (.590DIA) ON - OFF 0.50x0.60 (.019x.023) 5.08 (.200) Also available with straight PC terminals : IZP*1P4 and quick-connect terminals : IZP*1Z4. Flat Sealed flying lead terminals 3.20 (.125) Flat actuator IZPP1S4 O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) O12.00 (.472DIA) Curved actuator IZPR1F4 ON - OFF 15.00/Plat (.590/Flat) 20.00maxi. (.787MAX.) O15.00 (.590DIA) ON - OFF 50010 (19.68.393) Flat actuator IZPP1F4 15.00/Plat (.590/Flat) 8.70 (.342) ON - OFF 2.00 (.078) Curved actuator IZPR1S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) O16.00x100SI (.630DIAx100IS) 8.70 (.342) Solder lug terminals 4.00 (.157) B (+) (-) Quick-connect Z 3.40 (.133) (+) 3.20 (.125) 1.40 (.055) (-) Straight P Solder lug S 2.30 (.090) * Four LED colours * Tin plated LED terminals * Gold plated contacts Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode (-) ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOUR LED COLOUR 2 : black (standard) Other : on request. L0S : super red - L0Y : yellow - L0G : green L0B : blue B-52 www.apem.com APEM IZ series New! Rear mounted sealed pushbutton switches - bushing O 16 mm - latching Non-illuminated * Gold plated contacts Straight P 2.80 (.110) 8.40 (.330) 2.40 (.094) 1.10X0.50 (.043X.019) 1.20 (.047) 3.40 (.133) ON 3.20 (.125) 1.40 (.055) OFF Quick-connect Z 4.20 (.165) 2.30 (.090) Solder lug S 2.80 (.110) MODEL STRUCTURE Plunger marking available on IZPP models (symbol 10 mm max.). On request. O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) O16.00x100SI (.630DIAx100IS) O20.00 (.787DIA) 4.00 (.157) O12.00 (.472DIA) ON - OFF O15.00 (.590DIA) ON - OFF 15.00/Plat (.590/Flat) 50010 (19.68.393) Flat actuator IZPP1F4 2.00 (.078) 5.08 (.200) Flat Sealed flying lead terminals 3.20 (.125) ON - OFF Also available with straight PC terminals : IZP*1P4 and quick-connect terminals : IZP*1Z4. Curved actuator IZPR1F4 8.70 (.342) 14.00 (.551) O15.00 (.590DIA) 8.70 (.342) Flat actuator IZPP1S4 ON - OFF 15.00/Plat (.590/Flat) 20.00 maxi (.787MAX.) Curved actuator IZPR1S4 4.00 (.157) O12.00 (.472DIA) 2.00 (.078) Flat Solder lug terminals ACTUATOR COLOUR 1 : blue - B : dark blue - 2 : black - 3 : green - 5 : yellow - 6 : red - 7 : white - 8 : bright chrome - 9 : orange A : satin chrome BUSHING AND BEZEL COLOUR 2 : black (standard) Other : on request. APEM www.apem.com B-53 B