F97 Series Resin-Molded Chip, Improved Reliability J-Lead FEATURES * Compliant to the RoHS2 directive 2011/65/EU * Compliant to AEC-Q200 * Improved reliability - FR=0.5%/1000hrs (twice better than standard) LEAD-FREE COMPATIBLE COMPONENT * SMD J-lead APPLICATIONS * Automotive electronics(Engine ECU) * Industrial equipment A, B CASE L CASE DIMENSIONS: millimeters (inches) C, N CASE W1 L Code W1 H A H B W2 W2 C S S S S N MARKING B CASE 10 16r C 475 Rated Voltage Code C CASE Capacitance (F) Capacitance (F) Month Code Rated Voltage (V) Month Code Rated Voltage W2 H S 1.20 0.10 (0.047 0.004) 2.20 0.10 (0.087 0.004) 2.20 0.10 (0.087 0.004) 2.40 0.10 (0.094 0.004) 1.60 0.20 (0.063 0.008) 1.90 0.20 (0.075 0.008) 2.50 0.20 (0.098 0.008) 2.80 0.20 (0.110 0.008) 0.80 0.20 (0.031 0.008) 0.80 0.20 (0.031 0.008) 1.30 0.20 (0.051 0.008) 1.30 0.20 (0.051 0.008) Capacitance (F) Rated Voltage (V) Capacitance Code pF code: 1st two digits represent significant figures, 3rd digit represents multiplier (number of zeros to follow) Month Code Rated Voltage (V) HOW TO ORDER F97 1C 335 Type W1 1.60 0.20 (0.063 0.008) 2.80 0.20 (0.110 0.008) 3.20 0.20 (0.126 0.008) 4.30 0.20 (0.169 0.008) N CASE 47 10r Capacitance Code 10 16r A CASE L 3.20 0.20 (0.126 0.008) 3.50 0.20 (0.126 0.008) 6.00 0.20 (0.236 0.008) 7.30 0.20 (0.287 0.008) M A Tolerance K = 10% M = 20% Case Size See table above Packaging See Tape & Reel Packaging Section TECHNICAL SPECIFICATIONS Category Temperature Range: Rated Temperature: Capacitance Tolerance: Dissipation Factor: ESR 100kHz: Leakage Current: Capacitance Change By Temperature -55 to +125C +85C 20%, 10% at 120Hz Refer to next page Refer to next page After 1 minute's application of rated voltage, leakage current at 20C is not more than 0.01CV or 0.5A, whichever is greater. After 1 minute's application of rated voltage, leakage current at 85C is not more than 0.1CV or 5A, whichever is greater. After 1 minute's application of derated voltage, leakage current at 125C is not more than 0.125CV or 6.3A, whichever is greater. +15% Max. at +125C +10% Max. at +85C -10% Max. at -55C MARCH 2015 139 F97 Series Resin-Molded Chip, Improved Reliability J-Lead CAPACITANCE AND RATED VOLTAGE RANGE (LETTER DENOTES CASE SIZE) Capacitance F Code 0.33 334 0.47 474 0.68 684 1 105 1.5 155 2.2 225 3.3 335 4.7 475 6.8 685 10 106 15 156 22 226 33 336 47 476 68 686 100 107 6.3V (0J) A A A/B B A/B A/C B/C N N Available Ratings *Codes under development - subject to change 140 MARCH 2015 10V (1A) A A A/B B A/B B A/B B/C/N B*/C/N N C/N* Rated Voltage 16V (1C) 20V (1D) A A A A A/B B A/B/C A/B*/C B/C/N B/C/N C/N A A A A B A/B B*/C B*/C N C/N 25V (1E) A A A*/B B B*/C C C/N C*/N N* N* 35V (1V) A A A A* A*/B B B*/C C C*/N N Please contact to your local AVX sales office when these series are being designed in your application. F97 Series Resin-Molded Chip, Improved Reliability J-Lead RATINGS & PART NUMBER REFERENCE AVX Part No. Rated Case Capacitance Voltage Size (F) (V) F970J335MAA F970J475MAA F970J685MAA F970J685MBA F970J156MBA F970J226MAA F970J226MBA F970J336MAA F970J336MCC F970J476MBA F970J476MCC F970J686MNC F970J107MNC A A A B B A B A C B C N N 3.3 4.7 6.8 6.8 15 22 22 33 33 47 47 68 100 F971A225MAA F971A335MAA F971A475MAA F971A475MBA F971A685MBA F971A106MAA F971A106MBA F971A156MBA F971A226MAA F971A226MBA F971A336MBA F971A336MCC F971A336MNC F971A476MCC F971A476MNC F971A686MNC F971A107MCC A A A B B A B B A B B C N C N N C 2.2 3.3 4.7 4.7 6.8 10 10 15 22 22 33 33 33 47 47 68 100 F971C105MAA F971C155MAA F971C225MAA F971C335MAA F971C475MAA F971C475MBA F971C685MBA F971C106MAA F971C106MBA F971C106MCC A A A A A B B A B C 1 1.5 2.2 3.3 4.7 4.7 6.8 10 10 10 6.3 Volt 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 Volt 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 16 Volt 16 16 16 16 16 16 16 16 16 16 DCL (A) DF ESR (%) () @ 120Hz @ 100kHz *1 C/C (%) 0.5 0.5 0.5 0.5 0.9 1.4 1.4 2.1 2.1 3.0 3.0 4.3 6.3 4 6 6 6 6 12 8 12 6 8 6 6 8 4.5 4.0 3.5 2.5 2.0 2.5 1.9 2.5 1.1 1.0 0.9 0.6 0.6 * * * * * * * * * * * * * 0.5 0.5 0.5 0.5 0.7 1.0 1.0 1.5 2.2 2.2 3.3 3.3 3.3 4.7 4.7 6.8 10.0 4 4 6 6 6 6 6 6 15 8 8 6 6 8 6 6 10 5.0 4.5 4.0 2.8 2.5 3.0 2.0 2.0 3.0 1.9 1.9 1.1 0.7 0.9 0.7 0.6 0.7 * * * * * * * * * * * * * * * * * 0.5 0.5 0.5 0.5 0.8 0.8 1.1 1.6 1.6 1.6 4 4 4 4 8 6 6 8 6 6 7.5 6.3 5.0 4.5 4.0 2.8 2.5 3.5 2.1 1.5 * * * * * * * * * * AVX Part No. Rated Case Capacitance Voltage Size (F) (V) F971C156MAA F971C156MCC F971C226MBA F971C226MCC F971C226MNC F971C336MBA F971C336MCC F971C336MNC F971C476MCC F971C476MNC A C B C N B C N C N 15 15 22 22 22 33 33 33 47 47 F971D684MAA F971D105MAA F971D155MAA F971D225MAA F971D335MBA F971D475MAA F971D475MBA F971D685MCC F971D106MCC F971D156MNC F971D226MCC F971D226MNC A A A A B A B C C N C N 0.68 1 1.5 2.2 3.3 4.7 4.7 6.8 10 15 22 22 F971E684MAA F971E105MAA F971E225MBA F971E335MBA F971E475MCC F971E685MCC F971E106MCC F971E106MNC F971E156MNC A A B B C C C N N 0.68 1 2.2 3.3 4.7 6.8 10 10 15 F971V334MAA F971V474MAA F971V684MAA F971V155MBA F971V225MBA F971V335MCC F971V475MCC F971V685MNC F971V106MNC A A A B B C C N N 0.33 0.47 0.68 1.5 2.2 3.3 4.7 6.8 10 16 16 16 16 16 16 16 16 16 16 20 Volt 20 20 20 20 20 20 20 20 20 20 20 20 25 Volt 25 25 25 25 25 25 25 25 25 35 Volt 35 35 35 35 35 35 35 35 35 DCL (A) DF ESR (%) () @ 120Hz @ 100kHz *1 C/C (%) 2.4 2.4 3.5 3.5 3.5 5.3 5.3 5.3 7.5 7.5 12 6 8 8 6 10 8 6 10 8 3.5 1.2 1.9 1.1 0.7 2.1 1.1 0.7 1.1 0.7 10 * * * * * * * * * 0.5 0.5 0.5 0.5 0.7 0.9 0.9 1.4 2.0 3.0 4.4 4.4 4 4 4 6 4 8 6 6 6 6 8 6 7.6 7.5 6.7 6.3 3.1 4.0 2.8 1.8 1.5 0.7 1.1 0.7 * * * * * * * * * * * * 0.5 0.5 0.6 0.8 1.2 1.7 2.5 2.5 3.8 4 4 4 4 6 6 6 6 6 7.6 7.5 3.8 3.5 1.8 1.8 1.6 1.0 0.7 * * * * * * * * * 0.5 0.5 0.5 0.5 0.8 1.2 1.6 2.4 3.5 4 4 4 4 4 4 6 6 6 12.0 10.0 7.6 4.0 3.8 2.0 1.8 1.0 1.0 * * * * * * * * * * In case of capacitance tolerance 10% type, "K" will be put at 9th digit of type numbering system *1: C/C Marked "*" Item Damp Heat Temperature cycles Resistance soldering heat Surge Endurance Load Humidity All Case (%) 10 5 5 5 10 10 MARCH 2015 141 F97 Series Resin-Molded Chip, Improved Reliability J-Lead QUALIFICATION TABLE TEST Damp Heat (Steady State) Load Humidity Temperature Cycles Resistance to Soldering Heat Solderability Surge Endurance Shear Test Terminal Strength Failure Rate 142 MARCH 2015 F97 series (Temperature range -55C to +125C) Condition At 85C, 85% R.H., 1000 hours (No voltage applied) Capacitance Change ........... Refer to page 141 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. 125% or less than the initial specified value After 1000 hour's application of rated voltage in series with a 33 resistor at 85C, 85% R.H., capacitors meet the characteristics requirements table below. Capacitance Change ........... Refer to page 141 (*1) Dissipation Factor ................ 120% or less than the initial specified value Leakage Current .................. 200% of less than the initial specified value At -55C / +125C, 30 minutes each, 1000 cycles Capacitance Change ........... Refer to page 141 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less 10 seconds reflow at 260C, 5 seconds immersion at 260C. Capacitance Change ........... Refer to page 141 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After immersing capacitors completely into a solder pot at 245C for 2 to 3 seconds, more than 3/4 of their electrode area shall remain covered with new solder. After application of surge voltage in series with a 33 resistor at the rate of 30 seconds ON, 30 seconds OFF, for 1000 successive test cycles at 85C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 141 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After 2000 hours' application of rated voltage in series with a 3 resistor at 85C, or derated voltage in series with a 3 resistor at 125C, capacitors shall meet the characteristic requirements in the table above. Capacitance Change ........... Refer to page 141 (*1) Dissipation Factor ................ Initial specified value or less Leakage Current .................. Initial specified value or less After applying the pressure load of 17.7N for 60 seconds horizontally to the center of capacitor side body which has no electrode and has been soldered beforehand on a substrate, there shall be found neither exfoliation nor its sign at the terminal electrode.. Keeping a capacitor surface-mounted on a substrate upside down and supporting the substrate at both of the opposite bottom points 45mm apart from the center of capacitor, the pressure strength is applied with a specified jig at the center of the substrate so that substrate may bend by1mm as illustrated. Then, there shall be found no remarkable abnormality on the capacitor terminals. 0.5% per 1000 hours at 85C, VR with 0.1/V series impedance, 60% confidence level. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: AVX: F970J336MCA F971C336MCC F971D475MBA F971C226KCC F971D225KAA F971E225KBA F970J225MAA F971V684MAA F971A336KBA F971C106MBA F971V225MCC F971A155MAA F971V475KCC F970G686MCC F971A226MBA F971D156MNC F971V334MAA F971A686KNC F970J686MNA F971E335MBA F971C106MCC F971C105MAA F970G107MNC F970J107KNC F971C106KBA F971D684MAA F971C475MAA F971A156MCC F971E105MAA F971D475MAA F971A476MNC F971C226MCC F971E474MAA F970J475MAA F971V105MBA F971E684MAA F971A335KAA F970G475MAA F971A336MBA F970J686MNC F970J336MCC F971C336MBA F971D106MCC F971A226MCC F970J226MAA F971C156MCC F971C106MAA F971E684KAA F971V155MBA F970G156MBA F970J107MNA F971D335KBA F970J107MNC F971E105KAA F970J476MBA F971C336MNC F970J336KAA F971E156MNC F971C336KCC F971C335MBA F970J476MCC F971C335KAA F970J685KBA F970G106MBA F971A226MAA F971D226MCC F971E106MCC F971A685KBA F971V225KBA F970G686MNC F971C475MBA F970J685KAA F971V225MBA F970J476MCA F971A106MAA F971E106KCC F970J476KCC F971D225MBA F971A335MAA F970J476KBA F970J335MAA F971D155KAA F971D105KAA F971A156KBA F971E685KCC F971D226KCC F971C475KAA F970J476MNC F970J226MBA F971A336MNC F970J685MAA F971A336MCC F971D105MAA F971V106MNC F970G335MAA F971E156KNC F971A106KAA F971V335MCC F971E106MNC F970G226MBA