PhotoMOS.book Page 66 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form A (AQV21S) Miniature SOP6-pin type of 60 to 400V load voltage GU SOP 1 Form A (AQV21S) FEATURES 4.4 .173 6.3 .248 2.1 .083 mm inch 1 6 2 5 3 4 1. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 2. Small SOP6-Pin package The device comes in a miniature SOP measuring (W) 4.4 x (L) 6.3 x(H) 2.1 mm (W) .173x (L) .248x(H) .083 inch approx. 25% of the volume and 50% of the footprint size of DIP type (DIP) Compliance with RoHS Directive (SOP) 3. Low-level off state leakage current of max. 1 A 4. Wide variation of load voltage 60V to 600V TYPICAL APPLICATIONS * Telephones * Measuring instruments * Computers * Industrial robots * High-speed inspection machines Approx. 25% Volume Approx. 50% Footprint TYPES Output rating* AC/DC dual use Part No. Package Packing quantity Tape and reel packing style Picked from the Picked from the 1/2/3-pin side 4/5/6-pin side Load voltage Load current 60V 500mA AQV212S AQV212SX AQV212SZ 100V 200V 350V 400V 600V 300mA 160mA 120mA 100mA 40mA AQV215S AQV217S AQV210S AQV214S AQV216S AQV215SX AQV217SX AQV210SX AQV214SX AQV216SX AQV215SZ AQV217SZ AQV210SZ AQV214SZ AQV216SZ Tube packing style SOP6-pin Tube Tape and reel 1 tube contains: 75 pcs. 1 batch contains: 1,500 pcs. 1,000 pcs. * Indicate the peak AC and DC values. Note: For space reasons, the two initial letters of the part number "AQ" and the packing style indicator "X" or "Z" are not marked on the relay. (Ex. the label for product number AQV212SX is V212S.) RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item Input Symbol Type of connection AQV212S AQV215S AQV217S AQV210S LED forward current LED reverse voltage IF VR 50 mA 5V Peak forward current IFP 1A Power dissipation Load voltage (peak AC) Pin VL Continuous load current IL Output A B C AQV214S Remarks f = 100 Hz, Duty factor = 0.1% 60 V 0.50 A 0.65 A 0.80 A 100 V 0.30 A 0.40 A 0.56 A 75 mW 200 V 350 V 0.16 A 0.12 A 0.20 A 0.13 A 0.28 A 0.15 A 400 V 0.10 A 0.11 A 0.12 A 600 V 0.04 A 0.05 A 0.06 A 1.0A 0.90A 0.48A 0.3 A 0.12 A Peak load current Ipeak Power dissipation Total power dissipation I/O isolation voltage Pout PT Viso 450 mW 500 mW 1,500 V AC Operating Topr -40C to +85C -40F to +185F Storage Tstg -40C to +100C -40F to +212F Temperature limits AQV216S 0.3 A All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. A connection: Peak AC, DC B, C connection: DC A connection: 100 ms (1 shot) VL= DC Non-condensing at low temperatures PhotoMOS.book Page 67 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form A (AQV21S) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Input Symbol Type of connection LED operate current Typical Maximum IFon -- LED turn off current Minimum Typical IFoff -- LED dropout voltage Typical Maximum VF -- Ron A Ron B Ron C ILeak -- AQV212S Turn on time* Transfer characteristics Turn off time I/O capacitance Initial I/C isolation resistance Maximum Typical Maximum Typical Maximum Minimum Ton -- Toff -- Ciso -- Riso -- IL = Max. IF = 50 mA 11 23 30 70 15 35 50 120 0.44 1.15 5.5 11.5 22.5 55 1.25 2.0 7.5 17.5 25 100 0.25 0.6 2.8 6.0 11.3 28 0.63 1.0 3.8 8.8 12.5 50 0.65 ms 0.60 ms 0.25 ms 0.25 ms 0.25 ms 0.25 ms 2.0 ms 0.08 ms 2.0 ms 0.06 ms 1.0 ms 0.05 ms 0.5 ms 0.05 ms 0.5 ms 0.05 ms 0.5 ms 0.05 ms Maximum Remarks IL = Max. 2.3 Typical Typical AQV216S 4.0 Maximum Maximum AQV214S 2.5 Typical Off state leakage current AQV210S 0.83 Typical Output AQV217S 0.7 mA 3 mA 0.4 mA 0.65 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V Maximum On resistance AQV215S 1 A 0.2 ms 0.8 pF IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 5 mA IL = Max. Within 1 s on time IF = 0 mA VL = Max. IF = 5 mA VL = Max. IF = 5 mA VL = Max. 1.5 pF f = 1 MHz VB = 0 V 1,000 M 500 V DC *Turn on/Turn off time Input 90% Output 10% Ton Toff RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value 5 Unit mA For Dimensions For Schematic and Wiring Diagrams For Cautions for Use These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 68 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form A (AQV21S) REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2.-(1) On resistance vs. ambient temperature characteristics 2.-(2) On resistance vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Type of connection: A Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 600 50 4 40 400 AQV215S 300 200 AQV217S AQV210S 100 AQV215S 3 2 On resistance, On resistance, AQV212S 500 Load current, mA 5 AQV214S AQV210S 30 20 AQV217S AQV212S 1 10 AQV214S 0 -40 AQV216S 8085 100 -20 0 20 40 60 Ambient temperature, C 0 -40 -20 0 0 20 40 60 8085 Ambient temperature, C -40 -20 0 20 40 60 8085 Ambient temperature, C 2.-(3) On resistance vs. ambient temperature characteristics 3. Turn on time vs. ambient temperature characteristics 4. Turn off time vs. ambient temperature characteristics Measured portion: between terminals 4 and 6; LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) LED current: 5 mA; Load voltage: Max. (DC); Continuous load current: Max. (DC) 120 80 60 2.0 1.5 AQV212S,AQV215S Turn off time, ms 2.5 AQV216S Turn on time, ms On resistance, 100 0.4 0.3 0.2 1.0 40 AQV212S -40 -20 0 0 20 40 60 8085 Ambient temperature, C 0.1 AQV214S,AQV217S 0.5 20 0 0.5 3.0 -40 -20 AQV210S, AQV216S 0 20 40 60 8085 Ambient temperature, C 0 AQV215S -40 AQV214S,AQV217S,AQV210S,AQV216S -20 0 20 40 60 8085 Ambient temperature, C 5. LED operate current vs. ambient temperature characteristics 6. LED turn off current vs. ambient temperature characteristics 7. LED dropout voltage vs. ambient temperature characteristics Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; Load voltage: Max. (DC); Continuous load current: Max. (DC) Sample: All types; LED current: 5 to 50 mA 5 4 3 2 1.5 LED dropout voltage, V LED turn off current, mA LED operate current, mA 5 4 3 2 1.4 1.3 1.2 50mA 30mA 20mA 10mA 5mA 1.1 1 1 1.0 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 -40 -20 0 20 40 60 8085 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 69 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form A (AQV21S) 8.-(1). Current vs. voltage characteristics of output at MOS portion 8.-(2). Current vs. voltage characteristics of output at MOS portion 9. Off state leakage current vs. load voltage characteristics Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Ambient temperature: 25C 77F 200 AQV212S AQV215S 0.3 0.2 AQV217S 160 AQV210S AQV214S 120 80 AQV216S 40 0.1 -1.0 -0.8 -0.6 -0.4 -0.2 Off state leakage current, A 0.4 Current, mA Current, A 0.5 -5 -4 -3 -2 -1 0.2 0.4 0.6 0.8 1.0 Voltage,V -0.1 1 -40 -0.2 -80 -0.3 -120 -0.4 -160 -0.5 -200 2 3 4 5 Voltage,V 10-3 10-6 10-9 AQV216S AQV214S 10-12 0 20 60 40 80 Load voltage, V 100 10. Turn on time vs. LED forward current characteristics 11. Turn off time vs. LED forward current characteristics 12. Output capacitance vs. applied voltage characteristics Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Load voltage: Max. (DC); Continuous load current: Max. (DC); Ambient temperature: 25C 77F Measured portion: between terminals 4 and 6; Frequency: 1 MHz; Ambient temperature: 25C 77F 1.2 0.8 0.6 AQV216S 0.08 AQV215S 0.06 0.4 0.04 0.2 0.02 AQV214S AQV210S AQV217S AQV216S Output capacitance, pF AQV212S 0.10 AQV212S,AQV215S Turn off time, ms Turn on time, ms 1.0 200 0.12 150 100 AQV214S,AQV210S,AQV216S AQV217S 50 AQV214S,AQV210S,AQV217S 0 10 20 30 40 50 LED forward current, mA 60 0 AQV212S AQV215S 10 50 20 30 40 LED forward current, mA 60 0 0 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 10 20 30 40 Applied voltage, V 50