PhotoMOS.book Page 89 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form B (AQY41S) TESTING VDE (AQY410S, 414S) (AQY412S) Normally closed SOP4-pin type of 60V/350V/400V load voltage GU SOP 1 Form B (AQY41S) FEATURES 4.3 .169 4.4 .173 2.1 .083 mm inch 1 4 2 3 1. Small SOP4-pin package The device comes in a super-miniature SO package 4-pin type measuring (W) 4.3x(L) 4.4x(H) 2.1 mm (W) .169x(L) .173x(H) .083 inch 2. Low on-resistance The AQ4 series (normally closed type) has a low on-resistance. This has been achieved thanks to the built-in MOSFET processed by our proprietary method, DSD (Doublediffused and Selective Doping) method. Cross section of the normally-closed type of power MOS Compliance with RoHS Directive Passivation membrane Intermediate Source electrode Gate electrode insulating membrane N+ P+ N+ N+ P+ N+ 3. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 4. Low-level off-state leakage current of max. 1 A TYPICAL APPLICATIONS * Power supply * Measuring instruments * Security equipment * Telephone equipment * Sensing equipment Gate oxidation membrane N- Drain electrode N+ TYPES Output rating* AC/DC dual use Load voltage Load current 60V 500mA 350V 120mA 400V 100mA Part No. Package Tube packing style SOP4-pin Packing quantity Tape and reel packing style Picked from the Picked from the 1/2-pin side 3/4-pin side AQY412S AQY412SX AQY412SZ AQY410S AQY410SX AQY410SZ AQY414S AQY414SX AQY414SZ Tube Tape and reel 1 tube contains: 100 pcs. 1 batch contains: 2,000 pcs. 1,000 pcs. * Indicate the peak AC and DC values. Note: For space reasons, the three initial letters of the part number "AQY", the surface mount terminal shape indicator "S" and the packing style indicator "X" or "Z" are not marked on the relay. (Ex. the label for product number AQY412SX is 412) RATING 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperture limits Operating Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY412S AQY410S AQY414S 50 mA 5V 1A 75 mW 60 V 350 V 400 V 0.5 A 0.12 A 0.1 A 1.5 A 0.3 A 0.24 A 300 mW 350 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Remarks f = 100 Hz, Duty factor = 0.1% Peak AC, DC 100ms (1 shot), VL = DC Non-condensing at low temperatures All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 90 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form B (AQY41S) 2. Electrical characteristics (Ambient temperature: 25C 77F) Item Symbol Typical Maximum Minimum Typical Typical Maximum LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage AQY412S IFoff IFon VF Typical On resistance Ron Maximum Output Off state leakage current Maximum Reverse (ON) time* Transfer characteristics I/O capacitance Initial I/O isolation resistance AQY414S IL = Max. IF = 50 mA 1 18 26 25 35 IF = 0 mA IL = Max. Within 1 s on time IF = 5 mA VL = Max. 1 A 0.9 ms Toff 0.52 ms 3 ms 0.21 ms Ton 0.47 ms IF = 0 mA 5 mA IL = Max. 0.28 ms IF = 5 mA 0 mA IL = Max. 1 ms 0.23 ms 1 ms 1 ms 0.8 pF Ciso f = 1 MHz VB = 0 V 1.5 pF 1,000 M Riso Remarks IL = Max. 2.5 ILeak Typical Maximum Typical Maximum Typical Maximum Minimum Operate (OFF) time* AQY410S 0.9 mA 3 mA 0.4 mA 0.85 mA 1.25 V (1.14 V at IF = 5 mA) 1.5 V 500 V DC *Operate/Reverse time Input Output 10% 90% Toff Ton RECOMMENDED OPERATING CONDITIONS Please obey the following conditions to ensure proper relay operation and resetting. Item Input LED current Symbol IF Recommended value 5 Unit mA For Dimensions For Schematic and Wiring Diagrams For Cautions for Use These products are not designed for automotive use. If you are considering to use these products for automotive applications, please contact your local Panasonic Electric Works technical representative. For more information REFERENCE DATA 1. Load current vs. ambient temperature characteristics 2. On resistance vs. ambient temperature characteristics 3. Operate (OFF) time vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F Measured portion: between terminals 3 and 4; LED current: 0 mA; Continuous load current: Max.(DC) LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) 30 500 25 On resistance, Load current, mA 600 AQY412S 400 300 AQY410S 15 0 AQY412S 1 AQY414S AQY410S 5 AQY414S -20 1.5 0.5 AQY410S 0 -40 AQY414S 20 10 200 100 2 Operate (OFF) time, ms 700 AQY412S 20 40 60 80 85 100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85100 Ambient temperature, C All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. PhotoMOS.book Page 91 Thursday, March 26, 2009 2:21 PM GU SOP 1 Form B (AQY41S) 4. Reverse (ON) time vs. ambient temperature characteristics 5. LED operate (OFF) current vs. ambient temperature characteristics 6. LED reverse (ON) current vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) Sample: All types; Load voltage: Max.(DC); Continuous load current: Max.(DC) Sample: All types; Load voltage: Max.(DC); Continuous load current: Max.(DC) 0.6 AQY414S 0.4 5 LED reverse (ON) current, mA 0.8 0.2 5 LED operate (OFF) current, mA Reverse (ON) time, ms 1.0 4 3 2 4 3 2 1 AQY412S 1 AQY410S 0 -40 -20 0 0 20 40 60 80 85 100 Ambient temperature, C -40 -20 0 0 20 40 60 80 85 Ambient temperature, C -40 -20 0 20 40 60 80 85 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics 8-(1). Current vs. voltage characteristics of output at MOS portion 8-(2). Current vs. voltage characteristics of output at MOS portion Sample: All types; LED current: 5 to 50 mA Measured portion: between terminals 3 and 4; Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; Ambient temperature: 25C 77F 1.4 1.3 1.2 1.0 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C AQY412S 0.4 0.2 AQY414S 0.5 1 1.5 2 2.5 3 -20 Voltage, V -40 -60 -80 -100 -120 -140 50mA 30mA 20mA 10mA 5mA 1.1 0.6 AQY410S Current, A 140 120 100 80 60 40 20 -3 -2.5 -2 -1.5 -1 -0.5 Current, mA LED dropout voltage, V 1.5 -0.5 -1 0.5 1 Voltage, V -0.2 -0.4 -0.6 9-(1). Off state leakage current vs. load voltage characteristics 9-(2). Off state leakage current vs. load voltage characteristics 10. Operate (OFF) time vs. LED forward current characteristics Measured portion: between terminals 3 and 4; LED current: 5 mA; Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; LED current: 5 mA; Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; Load voltage: Max.(DC); Continuous load current: Max.(DC); Ambient temperature: 25C 77F 10-6 AQY410S AQY414S 10-9 10-3 Operate (OFF) time, ms Off state leakage current, A Off state leakage current, A 3.0 10-3 10-5 10 -7 AQY412S 10-9 2.5 2.0 AQY412S 1.5 1.0 AQY410S AQY414S 10-11 0.5 10-12 0 20 40 60 80 Load voltage, V 100 10-13 0 10 20 30 40 50 Load voltage, V 0 60 0 10 20 30 40 50 LED forward current, mA 60 11. Reverse (ON) time vs. LED forward current characteristics 12-(1). Output capacitance vs. applied voltage characteristics 12-(2). Output capacitance vs. applied voltage characteristics Measured portion: between terminals 3 and 4; Load voltage: Max.(DC); Continuous load current: Max.(DC); Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; Frequency: 1 MHz; Ambient temperature: 25C 77F Measured portion: between terminals 3 and 4; Frequency: 1 MHz; Ambient temperature: 25C 77F 120 100 0.5 0.4 AQY410S AQY414S 0.3 0.2 AQY412S 0.1 0 600 Output capacitance, pF Output capacitance, pF Reverse (ON) time, ms 0.6 500 80 400 60 300 40 200 AQY410S AQY414S 20 0 10 20 30 40 50 LED forward current, mA 60 0 AQY412S 100 0 10 20 30 40 50 Applied voltage, V 60 0 0 All Rights Reserved (c) COPYRIGHT Panasonic Electric Works Co., Ltd. 10 20 30 40 50 Applied voltage, V 60