
3
PM25CLA120
Intellimod™ L-Series
Three Phase IGBT Inverter
25 Amperes/1200 Volts
Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272
Electrical and Mechanical Characteristics, Tj = 25°C unless otherwise specified
Characteristics Symbol Test Conditions Min. Typ. Max. Units
IGBT Inverter Sector
Collector-Emitter Cutoff Current ICES VCE = VCES, VD = 15V, Tj = 25°C — — 1.0 mA
VCE = VCES, VD = 15V, Tj = 125°C — — 10 mA
Diode Forward Voltage VEC -IC = 25A, VCIN = 15V, VD = 15V — 2.5 3.5 Volts
Collector-Emitter Saturation Voltage VCE(sat) VD = 15V, VCIN = 0V, IC = 25A, — 1.8 2.3 Volts
Tj = 25°C
VD = 15V, VCIN = 0V, IC = 25A, — 1.9 2.4 Volts
Tj = 125°C
Inductive Load Switching Times ton 0.5 1.0 2.5 µs
trr VD = 15V, VCIN = 0 ⇔ 15V — 0.5 0.8 µs
tC(on) VCC = 600V, IC = 25A — 0.4 1.0 µs
toff Tj = 125°C — 2.0 3.0 µs
tC(off) — 0.7 1.2 µs
Control Sector
Short Circuit Trip Level SC -20°C ≤ Tj ≤ 125°C, VD = 15V 50 — — Amperes
Short Circuit Current Delay Time toff(SC) VD = 15V — 0.2 — µs
Over Temperature Protection OT Trip Level 135 145 155 °C
(Detect Tj of IGBT Chip) OTR Reset Level — 125 — °C
Supply Circuit Under-voltage Protection UV Trip Level 11.5 12.0 12.5 Volts
(-20 ≤ Tj ≤ 125°C) UVR Reset Level — 12.5 — Volts
Circuit Current ID VD = 15V, VCIN = 15V, VN1-VNC — 15 25 mA
VD = 15V, VCIN = 15V, VXP1-VXPC — 5 10 mA
Input ON Threshold Voltage Vth(on) Applied between UP-VUPC, 1.2 1.5 1.8 Volts
Input OFF Threshold Voltage Vth(off) VP-VVPC, WP-VWPC, UN- VN- WN-VNC 1.7 2.0 2.3 Volts
Fault Output Current* IFO(H) VD = 15V, VCIN = 15V — — 0.01 mA
IFO(L) VD = 15V, VCIN = 15V — 10 15 mA
Fault Output Pulse Width* tFO VD = 15V 1.0 1.8 — ms
*Fault output is given only when the internal SC, OT and UV protections schemes of either upper or lower devide operate to protect it.
Arm UP VP WP UN VN WN
Axis IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi
X 29.0 29.3 64.0 65.5 85.6 85.9 37.8 37.5 55.2 55.7 75.8 75.3
Y -7.1 1.5 -7.1 2.0 -7.1 2.0 5.1 -4.5 5.1 -4.5 5.1 -4.5
TC Measurement Point