Order this document by MBR0540T1/D SEMICONDUCTOR TECHNICAL DATA SOD-123 Power Surface Mount Package The Schottky Power Rectifier employs the Schottky Barrier principle with a barrier SCHOTTKY BARRIER metal that produces optimal forward voltage drop-reverse current tradeoff. Ideally RECTIFIER suited for low voltage, high frequency rectification, or as a free wheeling and polarity 0.5 AMPERES protection diodes in surface mount applications where compact size and weight are 40 VOLTS critical to the system. This package provides an alternative to the leadless 34 MELF style package. These state-of-the-art devices have the following features: * Guardring for Stress Protection * Very Low Forward Voltage * Epoxy Meets UL94, VO at 1/8 * Package Designed for Optimal Automated Board Assembly Mechanical Characteristics: * Reel Options: 3,000 per 7 inch reel / 8 mm tape CASE 425-04, Style 1 * Reel Options: 10,000 per 13 inch reel / 8 mm tape SOD-123 * Device Marking: B4 * Polarity Designator: Cathode Band * Weight: 11.7 mg (approximately) * Case: Epoxy Molded * Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable * Lead and Mounting Surface Temperature for Soldering Purposes: 260C max. for 10 Seconds MAXIMUM RATINGS Rating Symbol Value Unit VRRM VRWM VR 40 V IO 0.5 A Peak Repetitive Forward Current (At Rated VR, Square Wave, 20 kHz, TC = 115C) IFRM 1.0 A Non-Repetitive Peak Surge Current (Surge applied at rated load conditions, halfwave, single phase, 60 Hz) IFSM 5.5 A Tstg, TC -55 to 150 C TJ -55 to 150 C dv/dt 1,000 V/ms Rtjl Rtja 118 206 C/W Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Average Rectified Forward Current (At Rated VR, TC = 115C) Storage / Operating Case Temperature Operating Junction Temperature Voltage Rate of Change (Rated VR, TJ = 25C) THERMAL CHARACTERISTICS Thermal Resistance - Junction-to-Lead (2) Thermal Resistance - Junction-to-Ambient (3) ELECTRICAL CHARACTERISTICS Maximum Instantaneous Forward Voltage (1) VF (IF = 0.5 A) (IF = 1 A) Maximum Instantaneous Reverse Current (VR = 40 V) (VR = 20 V) IR TJ = 25C TJ = 100C 0.51 0.62 0.46 0.61 TJ = 25C TJ = 100C 20 10 5,000 13,000 V mA This document contains information on a new product. Specifications and information herein are subject to change without notice. (1) Pulse Test: Pulse Width 250 s, Duty Cycle 2.0%. (2) Mounted with minimum recommended pad size, PC Board FR4. (3) 1 inch square pad size (1 X 0.5 inch for each lead) on FR4 board. Rev 2 Device Rectifier Motorola, Inc. 1996 Data 1 100 10 25C 1.0 TJ = -40C TJ = 125C TJ = 25C TJ = 100C 0.1 0.2 0.4 0.6 1.0 0.8 1.2 TJ = 100C TJ = 25C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 Figure 2. Maximum Forward Voltage 100E-3 I R, MAXIMUM REVERSE CURRENT (AMPS) I R, REVERSE CURRENT (AMPS) TJ = 125C Figure 1. Typical Forward Voltage 10E-3 TJ = 125C 1.0E-3 TJ = 125C 10E-3 1.0E-3 TJ = 100C 100E-6 TJ = 100C 10E-6 1.0E-6 TJ = 25C 100E-9 10E-6 TJ = 25C 1.0E-6 100E-9 0 10 20 40 30 PFO , AVERAGE POWER DISSIPATION (WATTS) SQUARE WAVE Ipk/Io = p Ipk/Io = 5 0.3 Ipk/Io = 10 0.2 Ipk/Io = 20 0.1 0 20 30 40 Figure 4. Maximum Reverse Current FREQ = 20 kHz 0.4 20 Figure 3. Typical Reverse Current 0.7 0.5 10 VR, REVERSE VOLTAGE (VOLTS) dc 0.6 0 VR, REVERSE VOLTAGE (VOLTS) 0.8 I O , AVERAGE FORWARD CURRENT (AMPS) 1.0 VF, MAXIMUM INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100E-6 2 10 VF, INSTANTANEOUS FORWARD VOLTAGE (VOLTS) 100E-3 0 IF, INSTANTANEOUS FORWARD CURRENT (AMPS) IF, INSTANTANEOUS FORWARD CURRENT (AMPS) MBR0540T1 40 60 80 100 120 140 0.45 0.40 SQUARE WAVE 0.35 dc Ipk/Io = p 0.30 Ipk/Io = 5 0.25 Ipk/Io = 10 0.20 Ipk/Io = 20 0.15 0.10 0.05 0 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 TL, LEAD TEMPERATURE (C) IO, AVERAGE FORWARD CURRENT (AMPS) Figure 5. Current Derating Figure 6. Forward Power Dissipation 0.8 Rectifier Device Data MBR0540T1 TJ , DERATED OPERATING TEMPERATURE ( C) 100 C, CAPACITANCE (pF) TJ = 25C 10 R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) 0 5.0 10 15 20 25 30 35 126 124 Rtja = 118C/W 122 120 118 149C/W 116 180C/W 114 206C/W 112 228C/W 110 40 0 5.0 10 15 20 25 30 35 40 VR, REVERSE VOLTAGE (VOLTS) VR, DC REVERSE VOLTAGE (VOLTS) Figure 7. Capacitance Figure 8. Typical Operating Temperature Derating* * Reverse power dissipation and the possibility of thermal runaway must be considered when operating this device under any reverse voltage conditions. Calculations of TJ therefore must include forward and reverse power effects. The allowable operating TJ may be calculated from the equation: TJ = TJmax - r(t)(Pf + Pr) where r(t) = thermal impedance under given conditions, Pf = forward power dissipation, and Pr = reverse power dissipation This graph displays the derated allowable TJ due to reverse bias under DC conditions only and is calculated as TJ = TJmax - r(t)Pr, where r(t) = Rthja. For other power applications further calculations must be performed. 1.00E+00 1.00E-01 50% 20% 10% 5.0% 2.0% 1.0% 1.00E-02 Rtjl(t) = Rtjl*r(t) 1.00E-03 0.00001 0.0001 0.001 0.01 0.1 1.0 10 100 1,000 10 100 1,000 R (T) , TRANSIENT THERMAL RESISTANCE (NORMALIZED) T, TIME (s) Figure 9. Thermal Response Junction to Lead 1.00E+00 1.00E-01 50% 20% 10% 5.0% 2.0% 1.00E-02 1.0% 1.00E-03 0.00001 Rtjl(t) = Rtjl*r(t) 0.0001 0.001 0.01 0.1 1.0 T, TIME (s) Figure 10. Thermal Response Junction to Ambient Rectifier Device Data 3 MBR0540T1 RECOMMENDED FOOTPRINT FOR SOD-123 EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE EEEE 0.91 0.036 2.36 0.093 4.19 0.165 1.22 0.048 mm inches SOD-123 PACKAGE DIMENSIONS A AAAA AAAA AAAA C NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. H 1 K DIM A B C D E H J K B INCHES MIN MAX 0.055 0.071 0.100 0.112 0.037 0.053 0.020 0.028 0.004 --- 0.000 0.004 --- 0.006 0.140 0.152 MILLIMETERS MIN MAX 1.40 1.80 2.55 2.85 0.95 1.35 0.50 0.70 0.25 --- 0.00 0.10 --- 0.15 3.55 3.85 E 2 STYLE 1: PIN 1. CATHODE 2. ANODE J D CASE 425-04 ISSUE C Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. 81-3-5487-8488 Customer Focus Center: 1-800-521-6274 Mfax: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ 4 Rectifier MBR0540T1/D Device Data