DATA SH EET
Product specification December 1998
DISCRETE SEMICONDUCTORS
BTA204S series D, E and F
BTA204M series D, E and F
Three quadrant triacs guaranteed
commutation
December 1998 2 Rev1.000
Philips Semiconductors Product specification
Three quadrant triacs
guaranteed commutation BTA204S series D, E and F
BTA204M series D, E and F
GENERAL DESCRIPTION QUICK REFERENCE DATA
Passivated guaranteed commutation SYMBOL PARAMETER MAX. MAX. MAX. UNIT
triacs in a plastic envelope suitable for
surface mounting, intended for use in BTA204S (or BTA204M)- 500D 600D -
motor control circuits or with other BTA204S (or BTA204M)- 500E 600E 800E
highly inductive loads. These devices BTA204S (or BTA204M)- 500F 600F 800F
balance the requirements of V
DRM
Repetitive peak 500 600 800 V
commutation performance and gate off-state voltages
sensitivity. The "sensitive gate" E I
T(RMS)
RMS on-state current 4 4 4 A
series and "logic level" D series are I
TSM
Non-repetitive peak on-state 25 25 25 A
intendedfor interfacingwith lowpower current
drivers, including micro controllers.
PINNING - SOT428 PIN CONFIGURATION SYMBOL
PIN Standard Alternative
NUMBER S M
1 MT1 gate
2 MT2 MT2
3 gate MT1
tab MT2 MT2
LIMITING VALUES
Limiting values in accordance with the Absolute Maximum System (IEC 134).
SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT
-500 -600 -800
V
DRM
Repetitive peak off-state - 500
1
600
1
800 V
voltages
I
T(RMS)
RMS on-state current full sine wave; - 4 A
T
mb
≤ 107 ˚C
I
TSM
Non-repetitive peak full sine wave;
on-state current T
j
= 25 ˚C prior to
surge
t = 20 ms - 25 A
t = 16.7 ms - 27 A
I
2
tI
2
t for fusing t = 10 ms - 3.1 A
2
s
dI
T
/dt Repetitive rate of rise of I
TM
= 6 A; I
G
= 0.2 A; 100 A/µs
on-state current after dI
G
/dt = 0.2 A/µs
triggering
I
GM
Peak gate current - 2 A
V
GM
Peak gate voltage - 5 V
P
GM
Peak gate power - 5 W
P
G(AV)
Average gate power over any 20 ms - 0.5 W
period
T
stg
Storage temperature -40 150 ˚C
T
j
Operating junction - 125 ˚C
temperature
1
2
3
tab
T1T2
G
1 Although not recommended, off-state voltages up to 800V may be applied without damage, but the triac may
switch to the on-state. The rate of rise of current should not exceed 6 A/µs.
December 1998 3 Rev1.000
Philips Semiconductors Product specification
Three quadrant triacs
guaranteed commutation BTA204S series D, E and F
BTA204M series D, E and F
THERMAL RESISTANCES
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
R
th j-mb
Thermal resistance full cycle - - 3.0 K/W
junction to mounting base half cycle - - 3.7 K/W
R
th j-a
Thermal resistance pcb (FR4) mounted; footprint as in Fig.14 - 75 - K/W
junction to ambient
STATIC CHARACTERISTICS
T
j
= 25 ˚C unless otherwise stated
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
BTA204S (or BTA204M)- ...D ...E ...F
I
GT
Gate trigger current
2
V
D
= 12 V; I
T
= 0.1 A
T2+ G+ - - 5 10 25 mA
T2+ G- - - 5 10 25 mA
T2- G- - - 5 10 25 mA
I
L
Latching current V
D
= 12 V; I
GT
= 0.1 A
T2+ G+ - - 6 12 20 mA
T2+ G- - - 9 18 30 mA
T2- G- - - 6 12 20 mA
I
H
Holding current V
D
= 12 V; I
GT
= 0.1 A - - 6 12 20 mA
V
T
On-state voltage I
T
= 5 A - 1.4 1.7 V
V
GT
Gate trigger voltage V
D
= 12 V; I
T
= 0.1 A - 0.7 1.5 V
V
D
= 400 V; I
T
= 0.1 A; 0.25 0.4 - V
T
j
= 125 ˚C
I
D
Off-state leakage V
D
= V
DRM(max)
; T
j
= 125 ˚C - 0.1 0.5 mA
current
DYNAMIC CHARACTERISTICS
T
j
= 25 ˚C unless otherwise stated
SYMBOL PARAMETER CONDITIONS MIN. TYP. MAX. UNIT
BTA204S (or BTA204M)- ...D ...E ...F
dV
D
/dt Critical rate of rise of V
DM
= 67% V
DRM(max)
;203050--V/µs
off-state voltage T
j
= 125 ˚C; exponential
waveform; gate open circuit
dI
com
/dt Critical rate of change V
DM
= 400 V; T
j
= 125 ˚C; 1.0 2.0 2.5 - - A/ms
of commutating current I
T(RMS)
= 4 A;
dV
com
/dt = 20V/µs; gate
open circuit
dI
com
/dt Critical rate of change V
DM
= 400 V; T
j
= 125 ˚C; 5.0 - - - - A/ms
of commutating current I
T(RMS)
= 4 A;
dV
com
/dt = 0.1V/µs; gate
open circuit
t
gt
Gate controlled turn-on I
TM
= 12 A; V
D
= V
DRM(max)
;---2-µs
time I
G
= 0.1 A; dI
G
/dt = 5 A/µs
2 Device does not trigger in the T2-, G+ quadrant.
December 1998 4 Rev1.000
Philips Semiconductors Product specification
Three quadrant triacs
guaranteed commutation BTA204S series D, E and F
BTA204M series D, E and F
Fig.1. Maximum on-state dissipation, P
tot
, versus rms
on-state current, I
T(RMS)
, where
α
= conduction angle.
Fig.2. Maximum permissible non-repetitive peak
on-state current I
TSM
, versus pulse width t
p
, for
sinusoidal currents, t
p
≤
20ms.
Fig.3. Maximum permissible non-repetitive peak
on-state current I
TSM
, versus number of cycles, for
sinusoidal currents, f = 50 Hz.
Fig.4. Maximum permissible rms current I
T(RMS)
,
versus mounting base temperature T
mb
.
Fig.5. Maximum permissible repetitive rms on-state
current I
T(RMS)
, versus surge duration, for sinusoidal
currents, f = 50 Hz; T
mb
≤
107˚C.
Fig.6. Normalised gate trigger voltage
V
GT
(T
j
)/ V
GT
(25˚C), versus junction temperature T
j
.
012345
0
1
2
3
4
5
6
7
8
= 180
120
90
60
30
BT136
IT(RMS) / A
Ptot / W Tmb(max) / C
125
122
119
116
113
110
107
104
101
1
-50 0 50 100 150
0
1
2
3
4
5BT136
Tmb / C
IT(RMS) / A
107 C
10us 100us 1ms 10ms 100ms
10
100
1000 BT136
T / s
ITSM / A
TITSM
time
I
Tj initial = 25 C max
T
dI /dt limit
T
T2- G+ quadrant
0.01 0.1 1 10
0
2
4
6
8
10
12 BT136
surge duration / s
IT(RMS) / A
1 10 100 1000
0
5
10
15
20
25
30 BT136
Number of cycles at 50Hz
ITSM / A
TITSM
time
I
Tj initial = 25 C max
T
-50 0 50 100 150
0.4
0.6
0.8
1
1.2
1.4
1.6 BT136
Tj / C
VGT(Tj)
VGT(25 C)
December 1998 5 Rev1.000
Philips Semiconductors Product specification
Three quadrant triacs
guaranteed commutation BTA204S series D, E and F
BTA204M series D, E and F
Fig.7. Normalised gate trigger current
I
GT
(T
j
)/ I
GT
(25˚C), versus junction temperature T
j
.
Fig.8. Normalised latching current I
L
(T
j
)/ I
L
(25˚C),
versus junction temperature T
j
.
Fig.9. Normalised holding current I
H
(T
j
)/ I
H
(25˚C),
versus junction temperature T
j
.
Fig.10. Typical and maximum on-state characteristic.
Fig.11. Transient thermal impedance Z
th j-mb
, versus
pulse width t
p
.
-50 0 50 100 150
0
0.5
1
1.5
2
2.5
3
BTA204
Tj / C
T2+ G+
T2+ G-
T2- G-
IGT(Tj)
IGT(25 C)
0 0.5 1 1.5 2 2.5 3
0
2
4
6
8
10
12 BT136
VT / V
IT / A
Tj = 125 C
Tj = 25 C typ max
Vo = 1.27 V
Rs = 0.091 ohms
-50 0 50 100 150
0
0.5
1
1.5
2
2.5
3TRIAC
Tj / C
IL(Tj)
IL(25 C)
10us 0.1ms 1ms 10ms 0.1s 1s 10s
0.01
0.1
1
10 BT136
tp / s
Zth j-mb (K/W)
unidirectional
bidirectional
tp
P
t
D
-50 0 50 100 150
0
0.5
1
1.5
2
2.5
3TRIAC
Tj / C
IH(Tj)
IH(25C)
December 1998 6 Rev1.000
Philips Semiconductors Product specification
Three quadrant triacs
guaranteed commutation BTA204S series D, E and F
BTA204M series D, E and F
MECHANICAL DATA
Dimensions in mm
Net Mass: 1.1 g
Fig.12. SOT428 : centre pin connected to tab.
MOUNTING INSTRUCTIONS
Dimensions in mm
Fig.13. SOT428 : minimum pad sizes for surface mounting
.
Notes
1. Plastic meets UL94 V0 at 1/8".
6.22 max
2.38 max
0.93 max
6.73 max
0.3
10.4 max
0.5
0.8 max
(x2)
2.285 (x2)
0.5
seating plane
1.1
0.5 min
5.4
4 min
4.6
1
2
3
tab
7.0
7.0
2.15
2.5
4.57
1.5
December 1998 7 Rev1.000
Philips Semiconductors Product specification
Three quadrant triacs
guaranteed commutation BTA204S series D, E and F
BTA204M series D, E and F
DEFINITIONS
Data sheet status
Objective specification This data sheet contains target or goal specifications for product development.
Preliminary specification This data sheet contains preliminary data; supplementary data may be published later.
Product specification This data sheet contains final product specifications.
Limiting values
Limiting values are given in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one
or more of the limiting values may cause permanent damage to the device. These are stress ratings only and
operation of the device at these or at any other conditions above those given in the Characteristics sections of
this specification is not implied. Exposure to limiting values for extended periods may affect device reliability.
Application information
Where application information is given, it is advisory and does not form part of the specification.
Philips Electronics N.V. 1998
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the
copyright owner.
The information presented in this document does not form part of any quotation or contract, it is believed to be
accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any
consequence of its use. Publication thereof does not convey nor imply any license under patent or other
industrial or intellectual property rights.
LIFE SUPPORT APPLICATIONS
These products are not designed for use in life support appliances, devices or systems where malfunction of these
products can be reasonably expected to result in personal injury. Philips customers using or selling these products
for use in such applications do so at their own risk and agree to fully indemnify Philips for any damages resulting
from such improper use or sale.
© Philips Electronics N.V. SCA
All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner.
The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed
without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license
under patent- or other industrial or intellectual property rights.
Internet: http://www.semiconductors.philips.com
1999 68
Philips Semiconductors – a world wide company
For all other countries apply to: Philips Semiconductors,
International Marketing & Sales Communications, Building BE-p, P.O. Box 218,
5600 MD EINDHOVEN, The Netherlands, Fax. +31 40 27 24825
Argentina: see South America
Australia: 3 Figtree Drive, HOMEBUSH, NSW 2140,
Tel. +61 2 9704 8141, Fax. +61 2 9704 8139
Austria: Computerstr. 6, A-1101 WIEN, P.O. Box 213,
Tel. +43 1 60 101 1248, Fax. +43 1 60 101 1210
Belarus: Hotel Minsk Business Center, Bld. 3, r. 1211, Volodarski Str. 6,
220050 MINSK, Tel. +375 172 20 0733, Fax. +375 172 20 0773
Belgium: see The Netherlands
Brazil: see South America
Bulgaria: Philips Bulgaria Ltd., Energoproject, 15th floor,
51 James Bourchier Blvd., 1407 SOFIA,
Tel. +359 2 68 9211, Fax. +359 2 68 9102
Canada: PHILIPS SEMICONDUCTORS/COMPONENTS,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
China/Hong Kong: 501 Hong Kong Industrial Technology Centre,
72 Tat Chee Avenue, Kowloon Tong, HONG KONG,
Tel. +852 2319 7888, Fax. +852 2319 7700
Colombia: see South America
Czech Republic: see Austria
Denmark: Sydhavnsgade 23, 1780 COPENHAGEN V,
Tel. +45 33 29 3333, Fax. +45 33 29 3905
Finland: Sinikalliontie 3, FIN-02630 ESPOO,
Tel. +358 9 615 800, Fax. +358 9 6158 0920
France: 51 Rue Carnot, BP317, 92156 SURESNES Cedex,
Tel. +33 1 4099 6161, Fax. +33 1 4099 6427
Germany: Hammerbrookstraße 69, D-20097 HAMBURG,
Tel. +49 40 2353 60, Fax. +49 40 2353 6300
Hungary: see Austria
India: Philips INDIA Ltd, Band Box Building, 2nd floor,
254-D, Dr. Annie Besant Road, Worli, MUMBAI 400 025,
Tel. +91 22 493 8541, Fax. +91 22 493 0966
Indonesia: PTPhilips DevelopmentCorporation,Semiconductors Division,
Gedung Philips, Jl. Buncit Raya Kav.99-100, JAKARTA 12510,
Tel. +62 21 794 0040 ext. 2501, Fax. +62 21 794 0080
Ireland: Newstead, Clonskeagh, DUBLIN 14,
Tel. +353 1 7640 000, Fax. +353 1 7640 200
Israel: RAPAC Electronics, 7 Kehilat Saloniki St, PO Box 18053,
TEL AVIV 61180, Tel. +972 3 645 0444, Fax. +972 3 649 1007
Italy: PHILIPS SEMICONDUCTORS, Via Casati, 23 - 20052 MONZA (MI),
Tel. +39 039 203 6838, Fax +39 039 203 6800
Japan: Philips Bldg 13-37, Kohnan 2-chome, Minato-ku,
TOKYO 108-8507, Tel. +81 3 3740 5130, Fax. +81 3 3740 5057
Korea: Philips House, 260-199 Itaewon-dong, Yongsan-ku, SEOUL,
Tel. +82 2 709 1412, Fax. +82 2 709 1415
Malaysia: No. 76 Jalan Universiti, 46200 PETALING JAYA, SELANGOR,
Tel. +60 3 750 5214, Fax. +60 3 757 4880
Mexico: 5900 Gateway East, Suite 200, EL PASO, TEXAS 79905,
Tel. +9-5 800 234 7381, Fax +9-5 800 943 0087
Middle East: see Italy
Netherlands: Postbus 90050, 5600 PB EINDHOVEN, Bldg. VB,
Tel. +31 40 27 82785, Fax. +31 40 27 88399
New Zealand: 2 Wagener Place, C.P.O. Box 1041, AUCKLAND,
Tel. +64 9 849 4160, Fax. +64 9 849 7811
Norway: Box 1, Manglerud 0612, OSLO,
Tel. +47 22 74 8000, Fax. +47 22 74 8341
Pakistan: see Singapore
Philippines: Philips Semiconductors Philippines Inc.,
106 Valero St. Salcedo Village, P.O. Box 2108 MCC, MAKATI,
Metro MANILA, Tel. +63 2 816 6380, Fax. +63 2 817 3474
Poland: Al.Jerozolimskie 195 B, 02-222 WARSAW,
Tel. +48 22 5710 000, Fax. +48 22 5710 001
Portugal: see Spain
Romania: see Italy
Russia: Philips Russia, Ul. Usatcheva 35A, 119048 MOSCOW,
Tel. +7 095 755 6918, Fax. +7 095 755 6919
Singapore: Lorong 1, Toa Payoh, SINGAPORE 319762,
Tel. +65 350 2538, Fax. +65 251 6500
Slovakia: see Austria
Slovenia: see Italy
South Africa: S.A. PHILIPS Pty Ltd., 195-215 Main Road Martindale,
2092 JOHANNESBURG, P.O. Box 58088 Newville 2114,
Tel. +27 11 471 5401, Fax. +27 11 471 5398
South America: Al. Vicente Pinzon, 173, 6th floor,
04547-130 SÃO PAULO, SP, Brazil,
Tel. +55 11 821 2333, Fax. +55 11 821 2382
Spain: Balmes 22, 08007 BARCELONA,
Tel. +34 93 301 6312, Fax. +34 93 301 4107
Sweden: Kottbygatan 7, Akalla, S-16485 STOCKHOLM,
Tel. +46 8 5985 2000, Fax. +46 8 5985 2745
Switzerland: Allmendstrasse 140, CH-8027 ZÜRICH,
Tel. +41 1 488 2741 Fax. +41 1 488 3263
Taiwan: Philips Semiconductors, 6F, No. 96, Chien Kuo N. Rd., Sec. 1,
TAIPEI, Taiwan Tel. +886 2 2134 2886, Fax. +886 2 2134 2874
Thailand: PHILIPS ELECTRONICS (THAILAND) Ltd.,
209/2 Sanpavuth-Bangna Road Prakanong, BANGKOK 10260,
Tel. +66 2 745 4090, Fax. +66 2 398 0793
Turkey: Yukari Dudullu, Org. San. Blg., 2.Cad. Nr. 28 81260 Umraniye,
ISTANBUL, Tel. +90 216 522 1500, Fax. +90 216 522 1813
Ukraine: PHILIPS UKRAINE, 4 Patrice Lumumba str., Building B, Floor 7,
252042 KIEV, Tel. +380 44 264 2776, Fax. +380 44 268 0461
United Kingdom: Philips Semiconductors Ltd., 276 Bath Road, Hayes,
MIDDLESEX UB3 5BX, Tel. +44 208 730 5000, Fax. +44 208 754 8421
United States: 811 East Arques Avenue, SUNNYVALE, CA 94088-3409,
Tel. +1 800 234 7381, Fax. +1 800 943 0087
Uruguay: see South America
Vietnam: see Singapore
Yugoslavia: PHILIPS, Trg N. Pasica 5/v, 11000 BEOGRAD,
Tel. +381 11 62 5344, Fax.+381 11 63 5777
Printed in The Netherlands 135002/1160/03/pp8 Date of release: December 1998 Document order number: 9397 750 06619
1 of 2
Go to Philips Semiconductors' home page
Select & Go...
Start
part
Catalog & Datasheets
Catalog by Function
Discrete semiconductors
Audio
Clocks and Watches
Data communications
Microcontrollers
Peripherals
Standard analog
Video
Wired communications
Wireless communications
Catalog by System
Automotive
Consumer Multimedia
Systems
Communications
PC/PC-peripherals
Cross reference
Models
Packages
Application notes
Selection guides
Other technical documentation
End of Life information
Datahandbook system
Relevant Links
About catalog tree
About search
About this site
Subscribe to eNews
Catalog & Datasheets
Search BTA204S series D, E
and F; BTA204M series D, E
and F BTA204S series D, E
and F; BTA204M series D, E
and F
Information as of 2000
BTA204S series D, E and F; BTA204M series D, E and F; Three quadrant triacs
guaranteed commutation
Passivated guaranteed commutation triacs in a plastic envelope suitable for surface
mounting, intended for use in -motor control circuits or with other highly inductive loads.
These devices balance the requirements of commutation performance and gate sensitivity.
The "sensitive gate" E series and "logic level" D series are intended for interfacing with low
power drivers, including micro controllers.
• Description
• Datasheet
• Products, packages, availability and
ordering
• Find similar products
To be kept informed on BTA204S series D, E and F; BTA204M series D, E
subscribe to eNews.
Description
Datasheet
Type nr. Title
Publication
release
date Datasheet
status Page
count
File
size
(kB)
Datasheet
BTA204S
series D,
E and F;
BTA204M
series D,
E and F
Three quadrant
triacs guaranteed
commutation
01-Dec-99 Product
Specification 8 63
Download
Products, packages, availability and ordering
Partnumber North
American
Partnumber Order code
(12nc) marking/packing package
device status
BTA204S-
600D BTA204S-
600D /T3 9340 553 05118 Standard
Marking * Reel
Pack, SMD, 13" SOT428
Full production
BTA204S-
600E BTA204S-
600E /T3 9340 553 09118 Standard
Marking * Reel
Pack, SMD, 13" SOT428
Full production
BTA204S-
600F 9340 553 13118 Standard
Marking * Reel
Pack, SMD, 13" SOT428
Full production
2 of 2
BTA204S series D, E and F; BTA204M series D, E and F
links to the similar products
page containing an overview of products that are similar in function or related to the part
number(s) as
listed on this page. The similar products page includes products from the same
catalog tree(s) , relevant selection guides and products from the same functional category.
Find similar products:
Copyright © 2000
Royal Philips Electronics
All rights reserved.
Terms and conditions.
