These parts are preproduction products for electrical evaluation only.
Specification subject to change without notice.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 125°C
+
Halogen
Free
Sample
& buy
Support
& FAQ
Web
page
Tools &
softw
are
Shielded Power Inductors
–
XAL5020
Document 991-1
Document 991-1 Revised 11/02/18
Core material Composite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant tin-silver over copper. Other
terminations available at additional cost.
Weight 0.28 – 0.29 g
Operating voltage: 0 – 55 V
Ambient temperature –40°C to +125°C with (40°C rise) Irms current.
Maximum part temperature +165°C (ambient + temp rise). Derating.
Storage temperature Component: –55°C to +165°C.
Tape and reel packaging: –55°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 12 mm wide,
0.2 mm thick, 8 mm pocket spacing, 2.16 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
• High current and very low DCR
• Soft saturation makes them ideal for VRM/VRD applications.
• AEC-200 Grade 1 qualified (–40°C to +125°C ambient)
Inductance2
DCR (mOhms)3 SRF typ4 Isat5
Irms (A)6
Part number1 ±20% (µH) typ max (MHz) (A) 20°C rise 40°C rise
XAL5020-161ME_ 0.16 4.11 5.00 205 24.2 13.9 18.8
XAL5020-331ME_ 0.33 6.40 7.68 110 17.1 10.5 14.4
XAL5020-561ME_ 0.56 8.30 9.54 80 14.1 9.9 13.9
XAL5020-801ME_ 0.80 10.3 11.8 64 12.0 9.4 13.0
XAL5020-122ME_ 1.2 17.8 20.5 50 9.5 6.8 9.4
1. When ordering, please specify packaging code:
XAL5020-122MEC
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel).
B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added
($25 charge), use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked
(3500 parts per full reel).
2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using an Agilent/HP 4395A or equivalent.
5. DC current at 25°C that causes an inductance drop of 30% (typ) from its value without current.
Click for temperature derating information.
6. Current that causes the specified temperature rise from 25°C ambient. This information is for reference only
and does not represent absolute maximum ratings. Click for temperature derating information.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Irms Testing
Irms testing was performed on
0.75 inch wide × 0.25 inch thick
copper traces in still air.
Temperature rise is highly
dependent on many factors
including pcb land pattern, trace
size, and proximity to other com-
ponents. Therefore temperature
rise should be verified in appli-
cation conditions.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2018
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
AEC
Q200 125°C
+
Halogen
Free
Shielded Power Inductors
–
XAL5020
Document 991-2
Document 991-2 Revised 11/02/18
L vs Current L vs Frequency
XXX
0.165
4,2 typ
inches
mm
Dimensions are in
See
table
Dash thickness (typ)
number (in / mm)
Terminal
-161 0.0039 / 0.10
-331 0.0039 / 0.10
-561 0.0039 / 0.10
-801 0.0039 / 0.10
-122 0.0028 / 0.07
0.216 ±0.008
5,48 ±0,2
0.091
2,31
±0.010
±0.25
0.039 ±0.002
1,0 ±0,05
0.208 ±0.008
5,28 ±0,2
0.079
2,00 max
Recommended
Land Pattern
0.185
4,70
0.046
1,18
0.130
3,31
For optional tin-lead and tin-silver-
copper terminations, dimensions are
for the mounted part. Dimensions
before mounting can be an
additional 0.005 inch / 0.13 mm.
*
*
Dash
number Indicates startlead
and orientation
of terminations
0
0.24
0.12
0.36
0.48
Current (A)
Inductance (µH)
0.33 µH
02 4681412 16 18
20
10
0
0.4
0.2
0.6
0.8
Current (A)
Inductance (µH)
0.56 µH
02 46
81
412 16
18
10
0
0.4
0.6
0.2
0.8
1.2
1.0
Current (A)
Inductance (µH)
02143658
716
11 12 13 14 15109
0.80 µH
0
1.0
0.5
1.5
2.0
Current (A)
Inductance (µH)
021436589
71112
10
1.2 µH
010515202
530
0
0.08
0.04
0.16
0.20
0.12
0.24
Current (A)
Inductance (µH)
0.16 µH
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Coilcraft:
XAL5020-161MEC XAL5020-161MEB XAL5020-331MEB XAL5020-122MEB XAL5020-561MEC XAL5020-801MEB
XAL5020-331MEC XAL5020-801MEC XAL5020-561MEB XAL5020-122MEC XAL5020-222MEC XAL5020-222MEB
