Web page Sample & buy Tools & software Support & FAQ Document 991-1 Shielded Power Inductors - XAL5020 Halogen Free * High current and very low DCR * Soft saturation makes them ideal for VRM/VRD applications. * AEC-200 Grade 1 qualified (-40C to +125C ambient) Core material Composite Environmental RoHS compliant, halogen free Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight 0.28 - 0.29 g Operating voltage: 0 - 55 V Ambient temperature -40C to +125C with (40C rise) Irms current. Maximum part temperature +165C (ambient + temp rise). Derating. Storage temperature Component: -55C to +165C. Tape and reel packaging: -55C to +80C Resistance to soldering heat Max three 40 second reflows at +260C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30C / 85% relative humidity) Failures in Time (FIT) / Mean Time Between Failures (MTBF) 38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332 Packaging 1000/7 reel; 3500/13 reel Plastic tape: 12 mm wide, 0.2 mm thick, 8 mm pocket spacing, 2.16 mm pocket depth PCB washing Tested to MIL-STD-202 Method 215 plus an additional aqueous wash. See Doc787_PCB_Washing.pdf. AEC Q200 125C + Part number1 XAL5020-161ME_ XAL5020-331ME_ XAL5020-561ME_ XAL5020-801ME_ XAL5020-122ME_ DCR (mOhms)3 Inductance2 20% (H) typ max 0.16 4.11 5.00 0.33 6.40 7.68 0.56 8.30 9.54 0.80 10.3 11.8 1.2 17.8 20.5 SRF typ4 (MHz) 205 110 80 64 50 Irms (A)6 Isat5 (A) 20C rise 40C rise 24.2 13.9 18.8 17.1 10.5 14.4 14.1 9.9 13.9 12.0 9.4 13.0 9.5 6.8 9.4 1. When ordering, please specify packaging code: XAL5020-122MEC Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13 machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance tested at 1 MHz, 0.1 Vrms, 0 Adc. 3. DCR measured on a micro-ohmmeter. 4. SRF measured using an Agilent/HP 4395A or equivalent. 5. DC current at 25C that causes an inductance drop of 30% (typ) from its value without current. Click for temperature derating information. 6. Current that causes the specified temperature rise from 25C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 7. Electrical specifications at 25C. Refer to Doc 362 "Soldering Surface Mount Components" before soldering. Irms Testing Irms testing was performed on 0.75 inch wide x 0.25 inch thick copper traces in still air. Temperature rise is highly dependent on many factors including pcb land pattern, trace size, and proximity to other components. Therefore temperature rise should be verified in application conditions. These are preproduction products for electrical evaluation only. Document 991-1 Revised 11/02/18 +1-847-639-6400 sales@coilcraft.com USparts Specification subject to change without notice. sales@coilcraft-europe.com UK +44-1236-730595 (c) Coilcraft Inc. 2018 This product may not be used in medical or high Taiwan +886-2-2264 3646 sales@coilcraft.com.tw risk applications without prior Coilcraft approval. China +86-21-6218 8074 sales@coilcraft.com.cn Specification subject to change without notice. Please check web site for latest information. Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 991-2 Shielded Power Inductors - XAL5020 Halogen Free Inductance (H) L vs Current AEC 0.24 0.20 0.12 0.08 0.04 0 Inductance (H) Inductance (H) 0 5 10 15 20 Current (A) 25 30 0.48 0.36 0.33 H 0.24 0.12 0 0 2 4 6 8 10 12 14 Current (A) 16 18 20 0.8 0.208 0.008 5,28 0,2 0.6 0.56 H 0.4 0.2 0 0 2 4 6 8 10 Current (A) 12 14 16 18 XXX Inductance (H) 0.16 H 0.16 Q200 +125C Inductance (H) L vs Frequency Dash number 1.2 1.0 0.216 0.008 5,48 0,2 Indicates start lead and orientation of terminations 0.8 0.079 max * 2,00 0.80 H 0.6 0.4 0.2 0 0 1 2 3 4 5 6 7 8 9 Current (A) 0.039 0.002 1,0 0,05 0.091 0.010 2,31 0.25 10 11 12 13 14 15 16 0.130 3,31 2.0 1.5 1.2 H 0.185 4,70 1.0 0.5 0 0 1 2 3 4 5 6 7 Current (A) 8 9 10 11 12 0.046 1,18 Recommended Land Pattern US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg See table Dash number -161 -331 -561 -801 -122 0.165 typ 4,2 Terminal thickness (typ) (in / mm) 0.0039 / 0.10 0.0039 / 0.10 0.0039 / 0.10 0.0039 / 0.10 0.0028 / 0.07 * For optional tin-lead and tin-silvercopper terminations, dimensions are for the mounted part. Dimensions before mounting can be an additional 0.005 inch / 0.13 mm. Dimensions are in inches mm Document 991-2 Revised 11/02/18 (c) Coilcraft Inc. 2018 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Coilcraft: XAL5020-161MEC XAL5020-161MEB XAL5020-331MEB XAL5020-122MEB XAL5020-561MEC XAL5020-801MEB XAL5020-331MEC XAL5020-801MEC XAL5020-561MEB XAL5020-122MEC XAL5020-222MEC XAL5020-222MEB