MW-1/2-48-BLACK-BULK - 3M - Datasheet.Company

Heat Shrink Tubing Selection Guide

Single-Wall Polyolefin Tubing

FP-301 –55°C 212°F 2:1 3/64" 900 1015 2400 400 5 1.3 Self-Extinguish meets Non-Corrosive Good 3 Good Exc. Exc. MIL-DTL-23053/5, Class 1, 2;

to 100°C to UL 224 All-Tubing AMS-3636 & 3637; UL File

+135°C 4" Flame Test (except clear) E-39100; CSA LR38227; ABS

FP-301VW –55°C 212°F 2:1 3/64" 900 1015 2400 400 +1, –10 1.5 Self-Extinguish meets Non-Corrosive Good 3 Good Exc. Exc. MIL-DTL-23053/5, Class 3;

to 100°C to UL 224 VW-1 Test UL File E-39100, VW-1;

+135°C 4" CSA LR38227, OFT

VFP-876 –55°C 212°F 2:1 3/64" 800 1014 2100 450 5 1.3 Self-Extinguish meets Non-Corrosive Good 2 Good Exc. Exc. MIL-R-46846, Type V;

to 100°C to UL 224 All-Tubing UL File E-39100; CSA LR38227,

+135°C 2" Flame Test MIL-DTL-23053/5

SFTW-203 –55°C 212°F 3:1 1/16" 700 1015 2600 400 5 1.29 Self-Extinguish Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/5*, Class 1;

to 100°C to UL File E-48398; CSA LR38227

+135°C 1 1/2"

SFTW-202 –55°C 212°F 2:1 1/8" 700 1014 2600 400 5 1.29 Self-Extinguish Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/5, Class 1;

GYS to 100°C to UL File E-48398; CSA LR38227

+135°C 3/4"

CP-221 –55°C 250°F 2:1 3/64" 550 1014 1800 400 5 1.1 Self-Extinguish Non-Corrosive Good 4 Good Good Exc.

to 121°C to

+125°C 2"

Adhesive-Lined, Polyolefin Tubing

MW –55°C 275°F 2.5:1 1/8" 900 1015 2200 400 +1, –10 1.0 Non-Flame Retardant Non-Corrosive Good 7 Good Good Exc. MIL-DTL-23053/4, Class 1;

to 135°C to AMS-3634; UL File E-157227

+110°C 1"

EPS-200 –55°C 250°F 2:1 1/8" 800 1014 2100 450 +1, –5 1.3 Self-Extinguish meets Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/4, Class 2;

to 121°C to UL 224 All-Tubing UL File E-39100

+110°C 2" Flame Test (jacket)

EPS-300 –55°C 250°F 3:1 1/8" 700 1014 2100 450 +1, –15 1.3 Self-Extinguish meets Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/4, Class 3;

to 121°C to UL 224 All-Tubing UL File E-157227; ABS

+110°C 1-1/2" Flame Test (jacket)

EPS-400 –55°C 250°F 4:1 .300" 700 1014 1900 400 +1, –10 1.25 Self-Extinguish Non-Corrosive Good 7 Good Good Exc. UL File E-157227

to 121°C to

+110°C .700"

TMW –55°C 275°F .183" 900 1014 2500 400 +1, –10 1.0 Non-Flame Retardant Non-Corrosive Good 7 Good Good Exc. UL File E-157227

to 135°C to

+110°C .330"

TES –55°C 250°F 4:1 .220" 2450 450 +0, -10 0.97 TES Non-Flame Retardant Non-Corrosive Good TES 5 Good Good Exc. ESB-M99D56-Ford

SMS to 121°C 4:1 to 500 1014 1900 350 +0, -10 1.25 SMS Self-Extinguish Non-Corrosive Good SMS 3 Good Good Exc. MS-DB56-Chrysler

+110°C .700"

Special Purpose Tubing

KYNAR® –55°C 347°F 2:1 3/64" 900 1014 5500 350 +1, –10 1.7 Self-Extinguish meets Non-Corrosive Exc. 10 Exc. Exc. Exc. MIL-DTL-23053/18, Class 1; MIL-DTL-

to 175°C to UL 224 VW-1 Test 23053/8; AMS-3632; UL File E-39100,

+175°C 2" VW-1, E69751;CSA LR38227 OFT

NST –70°C 275°F 2:1 1/8" 800 1012 2100 500 +1, –10 1.3 Self-Extinguish Non-Corrosive Exc. 1 Exc. Good Exc. MIL-R-46846, Type I, Class 1;

to 135°C to MIL-DTL-23053/1, Class 1, 2;

+121°C 3" AMS-3623, SC-X-15112

VTN-200 –55°C 347°F 2:1 1/8" 500 1012 2400 450 +1, –10 1.7 Self-Extinguish Non-Corrosive Exc. 4 Exc. Exc. Exc. MIL-R-46846, Type III, Class 1;

to 175°C to MIL-DTL-23053/13

+200°C 2"

PSTH –55°C 338°F 2:1 3/16" 500 1014 2200 350 +2, –8 1.6 Self-Extinguish Non-Corrosive Exc. 4 Exc. Exc. Exc. SC-X15111C; meets the functional

to 170°C to requirements of MIL-DTL-23053/16

+150°C 2 1/2"

Heavy-Duty Tubing

MDT –55°C 250°F 3:1 .400" 500 1014 2400 475 +1, –10 1.28 Self-Extinguish Non-Corrosive Good 8 Good Good Exc. MIL-DTL-23053/15, Class 2; ABS

to 121°C to

+110°C 4.30"

HDT –55°C 250°F 3:1 .300" 500 1014 2400 475 +1, –10 1.28 Self-Extinguish Non-Corrosive Good 9 Good Good Exc. MIL-DTL-23053/15, Class 1; ABS

to 121°C to

+110°C 7.00"

CCT –55°C 250°F 3:1 .400" 500 1014 2000 400 +1, –10 1.30 Self-Extinguish Non-Corrosive Good 8 Good Good Exc.

to 121°C to

+110°C 3.00"

BBI –55°C 250°F 2.38" 550 1013 2200 575 +0, –10 1.20 Self-Extinguish Non-Corrosive Good 8 Good Good Exc. ASTM-D-257, 149, 150, 2303; IEC 216;

to 121°C to ANSI/IEEE Std C37.20

+110°C 10.28"

3M™ Heat Shrink Tubing Selection Guide

Flexible Polyolefin General purpose flame retardant insulation

for UL, CSA and MIL-DTL-23053/5 applications; cable and compo-

nent covering. Class 1 = opaque colors; Class 2 = clear.

Highly Flame-Retardant, Flexible Polyolefin Insulation

applications, flame-retardant applications requiring UL VW-1

and CSA OFT, fire-resistant wiring.

Very Flexible Polyolefin Terminal insulation, low

shrink-temperature applications.

Very Flexible Polyolefin Shrink-fit jacketing and insulation

of flexible wire bundles and temperature-sensitive components.

Green and Yellow Striped, 2:1 very flexible polyolefin,

primarily used for ground wire identification.

Commercial Grade Polyolefin Terminal strip wire markers

and general purpose insulation.

Multiple Wall Polyolefin Insulation, strain relief and sealing

of electrical connections, wire splices and components.

Environmental Protection Sleeve Insulation, strain relief

and environmental protection of electrical wire bundles

and components.

Environmental Protection Sleeve Insulation, strain relief

and environmental protection for automotive and marine

wire bundles and splices.

Environmental Protection Sleeve Insulation, strain relief

and environmental protection for sealing voids in multiple

wire bundles for automotive and marine applications.

Semi-Rigid Multiple Wall Terminal Protection Sleeve

Insulation, strain relief and environmental protection. Uses

include the manufacture of heat shrink butt connectors,

ring terminals and fork terminals.

All-Weather, Heat-Shrinkable, Dual Wall, Polyolefin Tubing for

Automotive Wire Harnesses

Polyvinylidene Fluoride Heat-resistant transparent insulation

and marking for electronic and appliance applications.

Modified Neoprene Insulation and abrasion resistant covering

of wiring and cable harnesses. Oil resistant coverings.

Fluoroelastomer Synthetic fuel and hydraulic oil resistant applica-

tions, high-temperature coverings.

Flexible Elastomeric Polyester Designed for harsh

operating conditions.

Medium-Duty Excellent abrasion, corrosion and environmental pro-

tection. Flame retardant.

Heavy-Duty Fabricated from specially formulated cross-linked poly-

olefin, assuring long-term environmental protection. Highly chemical,

abrasion and split resistant.

Adhesive-lined, 3:1 flexible polyolefin for sealing and insulating

CATV connections.

Bus Bar Tubing, Designed for insulating rectangular, square,

or round bus bar rated 5 kV through 35 kV.

PRODUCT

MATERIAL/

TYPICAL

APPLICATIONS

OPERATING

TEMPERATURE

RANGE

SHRINK TEMP.

(Min.)

SHRINK RATIO

STANDARD SIZES

EXPANDED DIAMETER

DIELECTRIC

STRENGTH

(V/mil)

VOLUME

RESISTIVITY

(ohm-cm)

TENSILE STRENGTH

(PSI)

ULTIMATE ELONGATION

(%)

LONGITUDINAL

CHANGE (+ %)

SPECIFIC GRAVITY

FLAMMABILITY

CORROSIVE

EFFECT

ABRASION

RESISTANCE

FLEXIBILITY

(See Note below)

FUEL & OIL

RESISTANCE

SOLVENT RESISTANCE

RESISTANCE TO

ACIDS AND ALKALIS

APPLICABLE

SPECIFICATIONS

Technical information provided consists of typical product data and

should not be used for specification purposes. Unless otherwise noted,

all tests are performed at room temperature.

Kynar® Elf Atochem North America, Inc.

Single-Wall Polyolefin Tubing

FP-301 –55°C 212°F 2:1 3/64" 900 1015 2400 400 5 1.3 Self-Extinguish meets Non-Corrosive Good 3 Good Exc. Exc. MIL-DTL-23053/5, Class 1, 2;

to 100°C to UL 224 All-Tubing AMS-3636 & 3637; UL File

+135°C 4" Flame Test (except clear) E-39100; CSA LR38227; ABS

FP-301VW –55°C 212°F 2:1 3/64" 900 1015 2400 400 +1, –10 1.5 Self-Extinguish meets Non-Corrosive Good 3 Good Exc. Exc. MIL-DTL-23053/5, Class 3;

to 100°C to UL 224 VW-1 Test UL File E-39100, VW-1;

+135°C 4" CSA LR38227, OFT

VFP-876 –55°C 212°F 2:1 3/64" 800 1014 2100 450 5 1.3 Self-Extinguish meets Non-Corrosive Good 2 Good Exc. Exc. MIL-R-46846, Type V;

to 100°C to UL 224 All-Tubing UL File E-39100; CSA LR38227,

+135°C 2" Flame Test MIL-DTL-23053/5

SFTW-203 –55°C 212°F 3:1 1/16" 700 1015 2600 400 5 1.29 Self-Extinguish Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/5*, Class 1;

to 100°C to UL File E-48398; CSA LR38227

+135°C 1 1/2"

SFTW-202 –55°C 212°F 2:1 1/8" 700 1014 2600 400 5 1.29 Self-Extinguish Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/5, Class 1;

GYS to 100°C to UL File E-48398; CSA LR38227

+135°C 3/4"

CP-221 –55°C 250°F 2:1 3/64" 550 1014 1800 400 5 1.1 Self-Extinguish Non-Corrosive Good 4 Good Good Exc.

to 121°C to

+125°C 2"

Adhesive-Lined, Polyolefin Tubing

MW –55°C 275°F 2.5:1 1/8" 900 1015 2200 400 +1, –10 1.0 Non-Flame Retardant Non-Corrosive Good 7 Good Good Exc. MIL-DTL-23053/4, Class 1;

to 135°C to AMS-3634; UL File E-157227

+110°C 1"

EPS-200 –55°C 250°F 2:1 1/8" 800 1014 2100 450 +1, –5 1.3 Self-Extinguish meets Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/4, Class 2;

to 121°C to UL 224 All-Tubing UL File E-39100

+110°C 2" Flame Test (jacket)

EPS-300 –55°C 250°F 3:1 1/8" 700 1014 2100 450 +1, –15 1.3 Self-Extinguish meets Non-Corrosive Good 3 Good Good Exc. MIL-DTL-23053/4, Class 3;

to 121°C to UL 224 All-Tubing UL File E-157227; ABS

+110°C 1-1/2" Flame Test (jacket)

EPS-400 –55°C 250°F 4:1 .300" 700 1014 1900 400 +1, –10 1.25 Self-Extinguish Non-Corrosive Good 7 Good Good Exc. UL File E-157227

to 121°C to

+110°C .700"

TMW –55°C 275°F .183" 900 1014 2500 400 +1, –10 1.0 Non-Flame Retardant Non-Corrosive Good 7 Good Good Exc. UL File E-157227

to 135°C to

+110°C .330"

TES –55°C 250°F 4:1 .220" 2450 450 +0, -10 0.97 TES Non-Flame Retardant Non-Corrosive Good TES 5 Good Good Exc. ESB-M99D56-Ford

SMS to 121°C 4:1 to 500 1014 1900 350 +0, -10 1.25 SMS Self-Extinguish Non-Corrosive Good SMS 3 Good Good Exc. MS-DB56-Chrysler

+110°C .700"

Special Purpose Tubing

KYNAR® –55°C 347°F 2:1 3/64" 900 1014 5500 350 +1, –10 1.7 Self-Extinguish meets Non-Corrosive Exc. 10 Exc. Exc. Exc. MIL-DTL-23053/18, Class 1; MIL-DTL-

to 175°C to UL 224 VW-1 Test 23053/8; AMS-3632; UL File E-39100,

+175°C 2" VW-1, E69751;CSA LR38227 OFT

NST –70°C 275°F 2:1 1/8" 800 1012 2100 500 +1, –10 1.3 Self-Extinguish Non-Corrosive Exc. 1 Exc. Good Exc. MIL-R-46846, Type I, Class 1;

to 135°C to MIL-DTL-23053/1, Class 1, 2;

+121°C 3" AMS-3623, SC-X-15112

VTN-200 –55°C 347°F 2:1 1/8" 500 1012 2400 450 +1, –10 1.7 Self-Extinguish Non-Corrosive Exc. 4 Exc. Exc. Exc. MIL-R-46846, Type III, Class 1;

to 175°C to MIL-DTL-23053/13

+200°C 2"

PSTH –55°C 338°F 2:1 3/16" 500 1014 2200 350 +2, –8 1.6 Self-Extinguish Non-Corrosive Exc. 4 Exc. Exc. Exc. SC-X15111C; meets the functional

to 170°C to requirements of MIL-DTL-23053/16

+150°C 2 1/2"

Heavy-Duty Tubing

MDT –55°C 250°F 3:1 .400" 500 1014 2400 475 +1, –10 1.28 Self-Extinguish Non-Corrosive Good 8 Good Good Exc. MIL-DTL-23053/15, Class 2; ABS

to 121°C to

+110°C 4.30"

HDT –55°C 250°F 3:1 .300" 500 1014 2400 475 +1, –10 1.28 Self-Extinguish Non-Corrosive Good 9 Good Good Exc. MIL-DTL-23053/15, Class 1; ABS

to 121°C to

+110°C 7.00"

CCT –55°C 250°F 3:1 .400" 500 1014 2000 400 +1, –10 1.30 Self-Extinguish Non-Corrosive Good 8 Good Good Exc.

to 121°C to

+110°C 3.00"

BBI –55°C 250°F 2.38" 550 1013 2200 575 +0, –10 1.20 Self-Extinguish Non-Corrosive Good 8 Good Good Exc. ASTM-D-257, 149, 150, 2303; IEC 216;

to 121°C to ANSI/IEEE Std C37.20

+110°C 10.28"

For your nearest 3M distributor, or to order, call 800 676-8381 Note: The materials are rated on a scale of 1–10 for flexibility:

1 = most flexible and 10 = most rigid.

*Material characteristics only

PRODUCT

MATERIAL/

TYPICAL

APPLICATIONS

OPERATING

TEMPERATURE

RANGE

SHRINK TEMP.

(Min.)

SHRINK RATIO

STANDARD SIZES

EXPANDED DIAMETER

DIELECTRIC

STRENGTH

(V/mil)

VOLUME

RESISTIVITY

(ohm-cm)

TENSILE STRENGTH

(PSI)

ULTIMATE ELONGATION

(%)

LONGITUDINAL

CHANGE (+ %)

SPECIFIC GRAVITY

FLAMMABILITY

CORROSIVE

EFFECT

ABRASION

RESISTANCE

FLEXIBILITY

(See Note below)

FUEL & OIL

RESISTANCE

SOLVENT RESISTANCE

RESISTANCE TO

ACIDS AND ALKALIS

APPLICABLE

SPECIFICATIONS

Electrical Markets Division

6801 River Place Blvd.

Austin, TX 78726-9000

800 676 8381

Fax 800 828 9329

http://www.3M.com/electrical

Litho in USA.

40% Pre-consumer waste paper

10% Post-consumer waste paper

Important Notice

Before using this product, you must

evaluate it and determine if it is suitable for

your intended application. You assume all

risks and liability associated with such use.

Warranty; Limited Remedy;

Limited Liability.

3M’s product warranty is stated in its

Product Literature available upon request.

3M MAKES NO OTHER WARRANTIES

INCLUDING, BUT NOT LIMITED

TO, ANY IMPLIED WARRANTY OF

MERCHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE. If this product is

defective within the warranty period stated

above, your exclusive remedy shall be, at

3M’s option, to replace or repair the 3M

product or refund the purchase price of

the 3M product. Except where prohibited

by law, 3M will not be liable for any loss

or damage arising from this 3M product,

whether direct, indirect, special, incidental

or consequential regardless of the legal

theory asserted.