Standard SMT and Through
Hole Lead Bend Options for
Subminiature LED Lamps
Technical Data
Features
• Surface Mount Lead
Configurations
• Right Angle Lead Bend for
Through Hole Mounting
• Tape and Reel in Accordance
with ANSI/EIA RS-481
Specifications
Description
Subminiature lamps (HLMx-Pxxx,
HLMX-Qxxx, HLMP-6xxx, HLMP-
70xx) are available with the
above standard options.
Subminiature Lamps with Options
11, 12, 21, 22, 31, and 32 are
suitable for surface mount
applications and their leads are
formed with gull wing, yoke bend
and Z bend respectively. They are
available in Tape and Reel
(compatible to ANSI/EIA RS-481)
or bulk. Options 1L, 1S, 2L, and
2S are right angle lead bends
suitable for through hole
applications.
Ordering Information
To order Subminiature Lamps
packaged with these standard
options, include the appropriate
option code along with the device
catalog part number. Example: to
order the HLMP-6300-F00xx with
Option 11 gull wing leads in
12 mm embossed tape on
178 mm (7 inch) diameter reels,
with 1500 lamps per reel; order
as follows: HLMP-6300-F0011.
Order quantities must be placed
in reel increments only. Orders
for partial reels will not be
accepted. For additional informa-
tion, please contact your local
Agilent Technologies sales office
or franchised distributor for
assistance.
Option 11, 12, 21, 22, 31,
32, 1L, 1S, 2L, 2S
HLMX-xxxx- x x x x x
4 x 4 Prod.
Part
Number
Min. Iv Bin
Max. Iv Bin
Color Bin
Selection
Packaging
Option
2
Selection Guide
Package
Option Outline
Code Package Configuration Drawing
11 Gull Wing Leads, 12 mm Tape on 7 in. Dia. Reel, Surface Mount A, H, K, L
1500 Parts per Reel[1]
12 Gull Wing Lead, Bulk Packaging, Quantity of 500 Parts[2]
14 Gull Wing Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
21 Yoke Leads, 12 mm Tape on 7 in. Dia. Reel B, I, K, L
1500 Parts per Reel[1]
22 Yoke Leads, Bulk Packaging, Quantity of 500 Parts[2]
24 Yoke Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
31 Z-Bend Leads, 12 mm Tape on 7 in. Dia. Reel C, J, K, L
1500 Parts per Reel[1]
32 Z-Bend Leads, Bulk Packaging, Quantity of 500 Parts[2]
34 Z-Bend Leads, 12 mm Tape on 13 in. Dia. Reel,
6000 Parts per Reel[1]
1L 2.54 mm (0.100 inch) Long Leads; 10.4 mm (0.410 in.) Right Angle Lead D
1S Short Leads; 3.7 mm (0.145 in.) E
2L 5.08 mm (0.200 inch) Long Leads; 9.2 mm (0.364 in.) F
2S Short Leads; 3.7 mm (0.145 in.) G
Notes:
1. SMT lamps are supplied in 12 mm embossed carrier tape. Minimum order is for one full reel, either 7 inch or 13 inch. All other order
quantities must be in reel increments only. Orders for partial reels are not accepted.
2. Vapor barrier bags are used for bulk packaging.
Bends for
Through Hole
Mounting
Lead
Configurations
Center Lead Spacing
Center Lead Spacing
3
(B) “Yoke” Lead, Options 21, 22, and 24
Package Dimensions, Lead Bend Options
(A) Gull Wing Lead, Option 11, 12, and 14
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
7.62 (0.300) MAX.
0.79 (0.031)
0.53 (0.021)
0.13 (0.005) TYP.
0.33 (0.013) R. TYP.
CATHODE
ANODE
3.45
(0.136)
NOM.
1.07 (0.042) TYP.
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
0.13 (0.005) R TYP.
0.13 (0.005)
MAX.
0.79 (0.031)
0.53 (0.021)
3.81 (0.150) MAX.
CATHODE
ANODE
4
(C) Z-Bend Lead, Option 31, 32, and 34
(D) Rt. Angle Bend Option 1L
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
0.79 (0.031)
0.53 (0.021)
4.06 (0.160)
4.57 (0.180)
0.76 (0.030)
0.51 (0.020)
5.59 (0.220)
6.10 (0.240)
3.05 (0.120)
NOM.
CATHODE
ANODE
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
10.16 (0.400)
10.67 (0.420)
2.54 (0.100)
NOM.
5
(E) Rt. Angle Bend Option 1S
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
3.43 (0.135)
3.94 (0.155)
2.54 (0.100)
NOM.
6
(F) Rt. Angle Bend Option 2L
(G) Rt. Angle Bend Option 2S
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
9.50 (0.374)
8.92 (0.351)
5.08 (0.200)
NOM.
ALL DIMENSIONS ARE IN MILLIMETERS (INCHES)
CATHODE
STRIPE
3.43 (0.135)
3.94 (0.155)
5.08 (0.200)
NOM.
7
Package Dimensions: Surface Mount Tape and Reel Options
(H) 12 mm Tape and Reel, Gull Wing Lead
PUSH PIN
HOLE, GULL
WING LEAD,
DOME ONLY
NOTES:
1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE.
2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm.
3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO.
4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE
CATHODE IS ORIENTED TOWARDS THE T APE SPROCKET HOLE.
8
(I) 12 mm Tape and Reel, “Yoke” Lead
NOTES:
1. EMPTY COMPONENT POCKETS SEALED WITH TOP COVER TAPE.
2. MINIMUM LEADER LENGTH AT EITHER END OF THE TAPE IS 500 mm.
3. THE MAXIMUM NUMBER OF CONSECUTIVE MISSING LAMPS IS TWO.
4. IN ACCORDANCE WITH ANSI/EIA RS-481 SPECIFICATIONS, THE
C ATHODE IS ORIENTED TOWARDS THE TAPE SPROCKET HOLE.
9
(J) 12 mm Tape and Reel, Z-Bend Lead
Embossed Carrier All Dimensions
Tape Dimensions Are in Millimeters
Per ANSI/EIA (Inches).
Standard RS-481.
Yoke and
Gull Wing Dome Gull Wing Flat Top Yoke Dome Z-Bend Dome Z-Bend Flat Top
D 1.55 (0.061 ± 0.002) Dia. 1.55 (0.061 ± 0.002) Dia. 1.55 (0.061 ± 0.002) Dia. 1.50 + 0.10 1.50 + 0.10
(0.059 + 0.004) Dia. (0.059 + 0.004) Dia.
D11.0 (0.039) Dia. Min. N/A (No Push Pin Hole) N/A (No Push Pin Hole) 1.50 + 0.25 N/A (No Push Pin Hole)
(0.059 + 0.010)
D220.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min. 20.2 (0.795) Dia. Min.
E 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069) 1.75 ± 0.1 (0.069)
F
K03.05 ± 0.1 (0.120) Typ. 2.54 ± 0.1 (0.100) Typ. 3.05 ± 0.1 (0.120) Typ. 2.97 ± 0.1 (0.117) Typ. 3.05 ± 0.1 (0.120) Typ.
P 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ.
P04.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ. 4.0 (0.157) Typ.
P22.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002) 2.0 (0.079 ± 0.002)
t 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.3 (0.012) Typ. 0.305 ± 0.013 0.305 ± 0.013
(0.0120 ± 0.0005) (0.0120 ± 0.0005)
W 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012) 12.0 ± 0.3 (0.472 ± 0.012)
Reel Dimensions All Dimensions
Per ANSI/EIA Are in Millimeters
Standard RS-481. (Inches).
7 inch Reel 13 Inch Reel
A 178.0 ± 2.0 (7.0 ± 0.08) Dia. 330 (12.9) Dia. Max.
C 13.0 (0.512) Dia. Typ. 13.0 (0.512) Dia. Typ.
N 50.0 (1.97) Min. 100.0 (3.93) Min.
T 18.4 (0.72) mMax. 18.4 (0.72) Max.
D1
D1
5.50 ± 0.05 (0.217 ± 0.002)
10
Storage Condition: 5 to 30˚C
@ 60% RH max.
Baking is required under the
condition:
a) the blue silica gel indicator
becoming white/transparent color
b) the pack has been opened for
more than 1 week
Baking recommended condition:
60 ± 5˚C for 20 hours.
(K) 12 mm Tape and Reel
PART:
LOT NO:
QTY:
D/C:
TAPE DATE:
QA INSP:
C/O:
PART:
LOT NO:
QTY: C/O:
EXC:
TAPE DATE:
QA INSP:
11
(L) Recommended Reflow Soldering Profile and Soldering Pad Pattern for SMT Options
Recommended Reflow Soldering Profile.
Wait until device has cooled to room
temperature before handling.
Recommended Soldering Pad Pattern for
Gull Wing Leads 11, 12, and 14.
Recommended Soldering Pad Pattern for
Yoke Leads 21, 22, and 24. Recommended Soldering Pad Pattern for
Z-Bend Leads 31, 32, and 34.
3.30 (0.130)
6.60 (0.260)
0.64 (0.025)
1.27
(0.50) 0.45
(0.018)
0.89
(0.035)
#27 DRILL
3.73 (0.147) DIA.
CLEARANCE HOLE
THROUGH PC BOARD
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
3.30 (0.130)
6.60 (0.260)
1.27
(0.50)
0.45
(0.018)
0.89
(0.035)
#27 DRILL
3.73 (0.147) DIA.
CLEARANCE HOLE
THROUGH PC BOARD
DIMENSIONS ARE IN
MILLIMETERS (INCHES)
0.89
(0.035)
1.78
(0.070)
3.58 (0.140)
0.45
(0.018)
0.45 (0.018)
0.89 (0.035)
230
10 SEC. MAX.
2-3°C/SEC.
120 SEC. MAX.
TIME
TEMPERATURE
183°C
125-170°C
3-4°C/SEC.
60-150
SEC.
3°C/SEC. MAX.
25°C
50°C
°C MAX.
+5
–0
www.semiconductor.agilent.com
Data subject to change.
Copyright © 2001 Agilent Technologies, Inc.
April 19, 2001
Obsoletes 5980-2003E (8/00)
5988-0363EN
