BY255GP - VISHAY - Datasheet.Company

BY251GP, BY252GP, BY253GP, BY254GP, BY255GP

www.vishay.com Vishay General Semiconductor

Revision: 11-Dec-13 1Document Number: 88541

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Glass Passivated Junction Plastic Rectifier

FEATURES

• Superectifier structure for high reliability

application

• Cavity-free glass-passivated junction

• Low forward voltage drop

• Low leakage current, IR less than 0.1 μA

• High forward surge capability

• Solder dip 275 °C max. 10 s, per JESD 22-B106

• AEC-Q101 qualified

• Material categorization: For definitions of compliance

please see www.vishay.com/doc?99912

TYPICAL APPLICATIONS

For use in general purpose rectification of power supplies,

inverters, converters and freewheeling diodes for both

consumer, and automotive applications.

MECHANICAL DATA

Case: DO-201AD, molded epoxy over glass body

Molding compound meets UL 94 V-0 flammability rating

Base P/N-E3 - RoHS-compliant, commercial grade

Base P/NHE3 - RoHS-compliant, AEC-Q101 qualified

Terminals: Matte tin plated leads, solderable per

J-STD-002 and JESD 22-B102

E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix

meets JESD 201 class 2 whisker test

Polarity: Color band denotes cathode end

PRIMARY CHARACTERISTICS

IF(AV) 3.0 A

VRRM 200 V, 400 V, 600 V, 800 V, 1300 V

IFSM 100 A

IR5.0 μA

VF1.1 V

TJ max. 175 °C

Package DO-201AD

Diode variations Single die

DO-201AD

SUPERECTIFIER

MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL BY251GP BY252GP BY253GP BY254GP BY255GP UNIT

Maximum non repetitive peak reverse voltage VRSM 220 440 660 880 1430 V

Maximum repetitive peak reverse voltage VRRM 200 400 600 800 1300 V

Maximum RMS voltage VRMS 140 280 420 560 910 V

Maximum DC blocking voltage VDC 200 400 600 800 1300 V

Maximum average forward rectified current 10 mm lead

length at TA = 55 °C IF(AV) 3.0 A

Peak forward surge current 10 ms single half sine-wave

superimposed on rated load IFSM 100 A

Maximum full load reverse current, full cycle average

10 mm lead length at TA = 55 °C IR(AV) 100 μA

Operating junction and storage temperature range TJ, TSTG - 65 to + 175 °C

BY251GP, BY252GP, BY253GP, BY254GP, BY255GP

www.vishay.com Vishay General Semiconductor

Revision: 11-Dec-13 2Document Number: 88541

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Note

(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted

Note

(1) AEC-Q101 qualified

RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted)

Fig. 1 - Forward Current Derating Curve Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current

ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER TEST CONDITIONS SYMBOL BY251GP BY252GP BY253GP BY254GP BY255GP UNIT

Maximum instantaneous

forward voltage 3.0 A VF1.1 V

Maximum reverse current at

rated DC blocking voltage TA = 25 °C IR5.0 μA

Maximum reverse recovery time IF = 0.5 A, IR = 1.0 V,

Irr = 0.25 A trr 3.0 μs

Typical junction capacitance 4.0 V, 1 MHz CJ40 pF

THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)

PARAMETER SYMBOL BY251GP BY252GP BY253GP BY254GP BY255GP UNIT

Typical thermal resistance RJA (1) 20 °C/W

RJL (1) 10

ORDERING INFORMATION (Example)

PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE

BY253GP-E3/54 1.28 54 1400 13" diameter paper tape and reel

BY253GP-E3/73 1.28 73 1000 Ammo pack packaging

BY253GPHE3/54 (1) 1.28 54 1400 13" diameter paper tape and reel

BY253GPHE3/73 (1) 1.28 73 1000 Ammo pack packaging

4.0

3.0

2.0

1.0

0 25 50 75 100 125 150 175

Average Forward Rectied Current (A)

Ambient Temperature (°C)

60 Hz Resistive

or Inductive Load

10 mm Lead Length

1000

100

1 10 100

Number of Cycles at 60 Hz

Peak Forward Surge Current (A)

= T

Max.

10 ms Single Half Sine-Wave

BY251GP, BY252GP, BY253GP, BY254GP, BY255GP

www.vishay.com Vishay General Semiconductor

Revision: 11-Dec-13 3Document Number: 88541

For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Fig. 3 - Maximum Non-Repetitive Peak Forward Surge Current

Fig. 4 - Typical Instantaneous Forward Characteristics

Fig. 5 - Typical Junction Capacitance



PACKAGE OUTLINE DIMENSIONS in inches (millimeters)

0 20406080100

0.1

0.01

Percent of Rated Peak Reverse Voltage (%)

Instantaneous Reverse Leakage

Current (μA)

TJ = 125 °C

TJ = 25 °C

TJ = 75 °C

Instantaneous Forward Voltage (V)

Instantaneous Forward Current (A)

100

0.1

0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3

TJ = 25 °C

Pulse Width = 300 μs

1 % Duty Cycle

Reverse Voltage (V)

Junction Capacitance (pF)

100

1 10 100

= 25 °C

f = 1.0 MHz

sig

= 50 mV

p-p

DO-201AD

0.210 (5.3)

0.190 (4.8)

DIA.

0.052 (1.32)

0.048 (1.22)

DIA.

1.0 (25.4)

MIN.

1.0 (25.4)

MIN.

0.375 (9.5)

0.285 (7.2)

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 13-Jun-16 1Document Number: 91000

Disclaimer



ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of

typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding

statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a

particular product with the properties described in the product specification is suitable for use in a particular application.

Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over

time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.

Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for

such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document

or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.