DSS 10-01A DSS 10-01AS IFAV = 10 A VRRM = 100 V VF = 0.66 V Power Schottky Rectifier VRSM VRRM V V 100 100 Type DSS 10-01A A TO-263 AB (...S-Type) C TO-220 AC DSS 10-01AS C (TAB) C A C A C (TAB) A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV TC = 160C; rectangular, d = 0.5 IFSM 35 10 A A TVJ = 45C; tp = 10 ms (50 Hz), sine 120 A EAS IAS = 5 A; L = 100 H; TVJ = 25C; non repetitive 1.3 mJ IAR VA =1.5 * VRRM typ.; f=10 kHz; repetitive 0.8 A 5000 V/s -55...+175 175 -55...+150 C C C 90 W 0.4...0.6 Nm 2 g (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25C Md mounting torque (A-Type only) Weight typical Symbol Conditions IR VR = VRRM; TVJ = 25C VR = VRRM; TVJ = 125C VF IF = 10 A; IF = 10 A; IF = 20 A; Characteristic Values typ. max. TVJ = 125C TVJ = 25C TVJ = 125C RthJC RthCH 0.5 0.3 2.5 mA mA 0.66 0.84 0.80 V V V 1.7 K/W K/W Features * * * * * International standard package Very low VF Extremely low switching losses Low IRM-values Epoxy meets UL 94V-0 Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions see Outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2005 IXYS All rights reserved 515 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0 % Data according to IEC 60747 and per diode unless otherwise specified. 1-2 DSS 10-01A DSS 10-01AS 20 10 A mA T =175C VJ 10 pF 1 IR IF 1000 CT 150C 125C 0.1 100C TVJ = 175C 150C 125C 25C 0.01 75C 50C 0.001 1 0.0 100 25C 0.2 0.4 0.6 0.8 V 1.0 0 20 40 60 40 A 35 0 80 V 100 VR VF Fig. 1 Maximum forward voltage drop characteristics TVJ= 25C 10 0.0001 Fig. 2 Typ. reverse current IR vs: reverse voltage VR 20 40 60 80 V 100 VR Fig. 3 Typ. junction capacitance CT versus reverse voltage VR 35 W 30 P(AV) 30 d=0.5 IF(AV) DC A IFSM 25 25 20 d= DC 0.5 0.33 0.25 0.17 0.08 20 15 15 10 10 5 5 0 0 0 40 80 120 TC 160 C Fig. 4 Avg: forward current IF(AV) vs: case temperature TC 1 K/W ZthJC 0 5 10 15 20 25 IF(AV) 30 A s tP Fig. 5 Forward power loss characteristics D=0.5 0.33 0.25 0.17 0.08 0.1 Single Pulse (Thermal Resistance) DSS 10-01A 0.01 0.0001 0.001 0.01 0.1 1 s Note: All curves are per diode 10 t IXYS reserves the right to change limits, Conditions and dimensions. (c) 2005 IXYS All rights reserved 515 Fig. 6 Transient thermal impedance junction to case at various duty cycles 2-2