LBA120L
Dual Single-Pole OptoMOS® Relay
www.clare.com
DS-LBA120L-R04 1
Part # Description
LBA120L 8-Pin DIP (50/Tube)
LBA120LS 8-Pin Surface Mount (50/Tube)
LBA120LSTR 8-Pin Surface Mount (1,000/Reel)
Parameter Ratings Units
Blocking Voltage 250 VP
Load Current 170 mA
Max RON 20 Ω
Applications
Features
Description
Approvals
Ordering Information
Pin Configuration
• Current Limited
• 3750Vrms Input/Output Isolation
• Small 8-Pin Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• High Reliability
• Arc-Free With No Snubbing Circuits
• FCC Compatible
• VDE Compatible
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount, Tape & Reel Version Available
• Telecommunications
• Telecom Switching
• Tip/Ring Circuits
• Modem Switching (Laptop, Notebook, Pocket Size)
• Hook Switch
• Dial Pulsing
• Ground Start
• Ringing Injection
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment-Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
LBA120L comprises two independent 250V, 170mA,
20Ω solid state relays: one single-pole, normally open
(1-Form-A) current limited relay and one single-pole,
normally closed (1-Form-B) relay.
LBA120L is designed to provide an ideal solution
where a complementary Form-A/Form-B relay pair is
required.
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component
TUV Certificate B 09 07 49410 004
RoHS
2002/95/EC e3
Pb
Switching Characteristics of
Normally Closed Devices
Form-B
I
F
10%
90%
I
LOAD
t
on
t
off
Form-A
I
F
I
LOAD
10%
90%
t
on
t
off
Switching Characteristics of
Normally Open Devices
1
2
3
4
8
7
6
5
+ Control - Normally Closed
– Control - Normally Closed
+ Control - Normally Open
– Control - Normally Open
Normally Closed Pole
Normally Open Pole
AC/DC Configuration
www.clare.com
2R04
LBA120L
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current
Continuous 1-I
L- - 150 mA
Load Current Limiting (1-Form-A Only) - ICL 190 235 280 mA
On-Resistance IL=170mA RON -2125
Ω
Off-State Leakage Current VL=250VPILEAK --1μA
Switching Speeds
Turn-On IF=5mA, VL=10V ton --5
ms
Turn-Off toff --5
Output Capacitance VL=50V, f=1MHz COUT -50-pF
Input Characteristics
Input Control Current IL=120mA IF--5mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR--10μA
Common Characteristics
Input to Output Capacitance - CI/O -3-pF
1 If both poles operate the load current must be derated so as not to exceed the package power dissipation value.
Parameter Ratings Units
Blocking Voltage 250 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate Linearly 1.33 mW/ºC
2 Derate Linearly 6.67 mW/ºC
Absolute Maximum Ratings @ 25ºC
Electrical Characteristics @ 25ºC
LBA120L
www.clare.com 3
R04
PERFORMANCE DATA for Inputs*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
LBA120L
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=30mA
I
F
=20mA
I
F
=10mA
I
F
=5mA
PERFORMANCE DATA for 1-Form-A Relay*
Form-A
Typical Turn-On Time
(N=50, IF=5mA, IL=170mADC, TA=25ºC)
0.23 0.41 0.59 0.770.680.500.32
Turn-On (ms)
Device Count (N)
30
25
20
15
10
5
0
Form-A
Typical Turn-Off Time
(N=50, IF=5mA, IL=170mADC, TA=25ºC)
0.06 0.14 0.22 0.300.10 0.18 0.26
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
Form-A
Typical On-Resistance Distribution
(N=50, IL=170mADC, TA=25ºC)
35
30
25
20
15
10
5
0
14.0 14.8 15.614.4 15.2
On-Resistance (Ω)
Device Count (N)
Form-A
Typical IF for Switch Operation
(N=50, IL=170mADC, TA=25ºC)
40
35
30
25
20
15
10
5
0
0.8 1.2 1.60.6 1.0 1.4 1.8
LED Current (mA)
Device Count (N)
Form-A
Typical IF for Switch Dropout
(N=50, IL=170mADC, TA=25ºC)
0.5 0.9 1.30.3 0.7 1.1 1.5
LED Current (mA)
Device Count (N)
25
20
15
10
5
0
Form-A
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
35
30
25
20
15
10
5
0
380 388 396384 392 400
Blocking Voltage (VP)
Device Count (N)
www.clare.com
4R04
LBA120L
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
PERFORMANCE DATA for 1-Form-A Relay (cont.)*
Form-A
Typical Turn-On vs. LED Forward Current
(IL=170mADC)
Turn-On (ms)
LED Forward Current (mA)
02 4 6 8 10 12 14 16 18
0.40
0.35
0.30
0.25
0.20
0.15
0.10
20
Form-A
Typical Turn-Off vs. LED Forward Current
(IL=170mADC)
LED Forward Current (mA)
Turn-Off (ms)
02 4 6 8 10 12 14 16 18 20
0.16
0.15
0.14
0.13
0.12
0.11
0.10
Form-A
Typical IF for Switch Operation
vs. Temperature
(IL=170mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Form-A
Typical IF for Switch Dropout
vs. Temperature
(IL=170mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Form-A
Typical Turn-On vs. Temperature
(IL=170mADC)
Temperature (ºC)
Turn-On (ms)
-40
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
IF=5mA
IF=10mA
IF=20mA
Form-A
Typical Turn-Off vs. Temperature
(IF=5mA, IL=170mADC)
Temperature (ºC)
Turn-Off (ms)
-40
0.30
0.25
0.20
0.15
0.10
0.05
0
-20 0 20 40 60 80 100
Form-A
Typical On-Resistance vs. Temperature
(IF=5mA, IL=170mADC)
Temperature (ºC)
On-Resistance (Ω)
-40
60
50
40
30
20
10
0
-20 0 20 40 60 80 100
Form-A
Typical Load Current vs. Load Voltage
(IF=5mA, TA=25ºC)
Load Voltage (V)
Load Current (mA)
200
150
100
50
0
-50
-100
-150
-200
-2.5 -1.5-2.0 -0.5-1.0 0 0.5 1.5 2.01.0 2.5
Form-A
Typical Load Current vs. Temperature
Temperature (ºC)
Load Current (mA)
250
200
150
100
50
0
-40 -20 0 20 40 60 80 120100
I
F
=20mA
I
F
=10mA
I
F
=5mA
Form-A
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Blocking Voltage (VP)
-40
400
395
390
385
380
375
-20 0 20 40 60 80 100
Form-A
Typical Leakage vs. Temperature
(Measured across Pins 5&6)
Temperature (ºC)
Leakage (μA)
-40
0.18
0.16
0.14
0.12
0.10
0.08
0.06
-20 0 20 40 60 80 100
Typical Current Limiting vs. Temperature
(IF=5mA)
Temperature (ºC)
Current (mA)
400
350
300
250
200
150
100
50
0
-40 -20 0 20 40 60 80 100
LBA120L
www.clare.com 5
R04
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
PERFORMANCE DATA for 1-Form-B Relay*
Form-B
Typical Turn-On Time
(N=50, IF=5mA, IL=170mADC, TA=25ºC)
0.42 0.66 0.900.54 0.78
Turn-On (ms)
Device Count (N)
35
30
25
20
15
10
5
0
0.30
Form-B
Typical Turn-Off Time
(N=50, IF=5mA, IL=170mADC, TA=25ºC)
0.875 1.375 1.8750.625 1.125 1.625
Turn-Off (ms)
Device Count (N)
35
30
25
20
15
10
5
0
Form-B
Typical On-Resistance Distribution
(N=50, IL=170mADC, TA=25ºC)
35
30
25
20
15
10
5
0
10.4 10.8 11.2 12.011.6 12.4
On-Resistance (Ω)
Device Count (N)
Form-B
Typical IF for Switch Operation
(N=50, IL=170mADC, TA=25ºC)
0.63 0.81 1.17 1.530.99 1.35
LED Current (mA)
Device Count (N)
30
25
20
15
10
5
0
Form-B
Typical IF for Switch Dropout
(N=50, IL=170mADC, TA=25ºC)
35
25
20
15
10
5
0
0.63 0.99 1.350.45 0.81 1.17
LED Current (mA)
Device Count (N)
Form-B
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
35
30
25
20
15
10
5
0
291.25 293.75 296.25 298.75 301.25 303.75
Blocking Voltage (VP)
Device Count (N)
Form-B
Typical Turn-On vs. LED Forward Current
(IL=170mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
0.634
0.632
0.630
0.628
0.626
0.624
0.622
50
Form-B
Typical Turn-Off vs. LED Forward Current
(IL=170mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
1.2
1.0
0.8
0.6
0.4
0.2
0
50
Form-B
Typical IF for Switch Operation
vs. Temperature
(IF=5mA, IL=170mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Form-B
Typical IF for Switch Dropout
vs. Temperature
(IL=170mADC)
Temperature (ºC)
LED Current (mA)
-40
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Form-B
Typical Turn-On vs. Temperature
(IF=5mA, IL=170mADC)
Temperature (ºC)
Turn-On (ms)
-40
0.12
0.10
0.08
0.06
0.04
0.02
0
-20 0 20 40 60 80 100
Form-B
Typical Turn-Off vs. Temperature
(IL=170mADC)
Temperature (ºC)
Turn-Off (ms)
-40
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
IF=5mA
IF=10mA
IF=20mA
www.clare.com
6R04
LBA120L
PERFORMANCE DATA for 1-Form-B Relay (cont.)*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Form-B
Typical On-Resistance vs. Temperature
(IF=5mA, IL=170mADC)
Temperature (ºC)
On-Resistance (Ω)
-40
60
50
40
30
20
10
0
-20 0 20 40 60 80 100
Form-B
Typical Load Current vs. Load Voltage
(IF=5mA, TA=25ºC)
Load Voltage (V)
Load Current (mA)
200
150
100
50
0
-50
-100
-150
-200
-2.0 -1.5 -1.0 -0.5 0.5 1.0 1.5
02.0
Form-B
Typical Load Current vs. Temperature
(IF=5mA)
Temperature (ºC)
Load Current (mA)
250
200
150
100
50
0
-40 -20 0 20 40 60 80 120100
Form-B
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Blocking Voltage (VP)
-40
310
305
300
295
290
285
-20 0 20 40 60 80 100
Form-B
Typical Leakage vs. Temperature
Measured across Pins 7&8
Temperature (ºC)
Leakage (μA)
-40
0.030
0.025
0.020
0.015
0.010
0.005
0-20 0 20 40 60 80 100
Energy Rating Curve
Time
Load Current (A)
10μs
1.2
1.0
0.8
0.6
0.4
0.2
0
1ms100μs 100ms 1s
10ms 10s 100s
LBA120L
www.clare.com 7
R04
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
LBA120L / LBA120LS MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
LBA120L / LBA120LS 250ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
www.clare.com
8R04
LBA120L
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
2.540 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
9.144 ± 0.508
(0.360 ± 0.020)
0.457 ± 0.076
(0.018 ± 0.003)
9.652 ± 0.381
(0.380 ± 0.015)
7.239 TYP.
(0.285)
7.620 ± 0.254
(0.300 ± 0.010)
4.064 TYP
(0.160)
0.889 ± 0.102
(0.035 ± 0.004)
8-0.800 DIA.
(8-0.031 DIA.) 2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
0.254 TYP
(0.01)
Dimensions
mm
(inches)
PCB Land Pattern
2.540 ± 0.127
(0.100 ± 0.005)
9.652 ± 0.381
(0.380 ± 0.015)
6.350 ± 0.127
(0.250 ± 0.005)
9.525 ± 0.254
(0.375 ± 0.010)
0.457 ± 0.076
(0.018 ± 0.003)
0.813 ± 0.120
(0.032 ± 0.004)
4.445 ± 0.127
(0.175 ± 0.005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
0.254 ± 0.127
(0.010 ± 0.0005)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
3.302 ± 0.051
(0.130 ± 0.002)
LBA120L
LBA120LS
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and
product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale,
Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for
a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications
intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare,
Inc. reserves the right to discontinue or make changes to its products at any time without notice.
Specification: DS-LBA120L-R04
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
7/13/2010
For additional information please visit our website at: www.clare.com
9
LBA120L
Dimensions
mm
(inches)
User Direction of Feed
NOTES:
1. Dimensions carry tolerances of EIA Standard 481-2
2. Tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Embossment
Embossed Carrier
Top Cover
Tape Thickness
0.102 MAX.
(0.004 MAX.)
330.2 DIA.
(13.00 DIA.)
K1=4.20
(0.165)
0
K =4.90
(0.193)
P=12.00
(0.472)
W=16.00
(0.63)
Bo=10.30
(0.406)
Ao=10.30
(0.406)
LBA120LS Tape & Reel
