T13E9.pdf 04.6.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Ceramic Trimmer Capacitors TZB4 Series 0.60.1 Depth 0.5 2.40.1 Features 1. Miniature rectangular shape: 4.0(W)x4.5(L)x3.0(H)mm 2. Color coded case facilitates identification of capacitance range. 3. Designed for automatic placement in surface mount applications. 4. Designed to withstand flux baths and solder baths (with cover film type) 5. Can be temporarily attached to PCB with adhesives (Terminal style A and B) 6. Can be reflow and flow (with cover film type) soldering method 7. Stable characteristics over a wide frequency range (Resonant frequency: 1000MHz min. / 6pF) 4.00.2 1.40.1 dia. 3.00.2 4.50.2 2.70.3 1.20.1 A Type Tolerance: 0.5 in mm 5.0 0.60.1 Depth 0.5 Applications 4.00.2 2.40.1 1.40.1 dia. 1. Car audio systems 2. Cordless telephones 3. Hybrid ICs 4. Pagers 5. Remote keyless entry systems 6. Tuner packs 7. Surveillance cameras 8. DVD 9. Burglarproof devices 3.00.2 4.50.2 1.20.1 B Type Tolerance: 0.5 in mm 7.0 0.60.1 Depth 0.5 4.00.2 2.40.1 1.40.1 dia. 3.00.2 4.50.2 2.5 7 C Type 0.80.1 5.0 6.2 1.40.1 dia. 4.00.2 0.80.1 2.40.1 0.60.1 Depth 0.5 4.00.2 2.40.1 0.60.1 Depth 0.5 Tolerance: 0.5 in mm 4.50.2 4.50.2 2.00.2 3.00.2 2.50.2 1.0 4.00.2 4.5 3.50.2 3.00.2 5.0 7.0 4.8 0.80.1 6.2 D Type E Type Tolerance: 0.5 in mm Tolerance: 0.5 in mm 29 T13E9.pdf 04.6.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Part Number Cmin. (max.) (pF) Cmax. (pF) TC TZB4Z030pp10 1.4 3.0 +50/-0% NP0200ppm/C 300min. at 1MHz, Cmax 100Vdc 220Vdc TZB4Z060pp10 2.0 6.0 +50/-0% NP0200ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc Blue TZB4Z100pp10 3.0 10.0 +50/-0% NP0300ppm/C 500min. at 1MHz, Cmax. 100Vdc 220Vdc White TZB4R200pp10 4.5 20.0 +50/-0% N750300ppm/C 500min. at 1MHz, Cmax 100Vdc 220Vdc Red TZB4P300pp10 6.5 30.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax 100Vdc 220Vdc Green TZB4P400pp10 8.5 40.0 +50/-0% N1200500ppm/C 300min. at 1MHz, Cmax 100Vdc 220Vdc Yellow TZB4Z250pp10 4.0 25.0 +100/-0% NP0300ppm/C 300min. at 1MHz, Cmax. 50Vdc 110Vdc Black+Marking TZB4R500pp10 7.0 50.0 +100/-0% N750300ppm/C 300min. at 1MHz, Cmax 50Vdc 110Vdc Black+Marking Q Rated Withstanding Voltage Voltage Stator/Case Color Brown Insulation Resistance : 10000M ohm Torque : 1.5 to 10.0mNm Operating Temperature Range : -25 to +85C First blank: Terminal Type Second blank: Cover film codes (A: not provided, B: provided) Construction Cover Film (Cover film type) Rotor Spring Plastic Case - Metal Rotor Ceramic Plate Stator Terminal Rotor Terminal + Land Pattern/Mounting Holes A Type B Type +0 8.0 - 0.5 +0 7.0 - 0.5 4.00.2 1.60.1 1.60.1 2.40.2 7 (in mm) (in mm) C Type D Type 1.10.1 dia. 1.00.1 2.80.2 dia. 1.10.1 dia. 5.00.5 0.80.1 (in mm) 5.00.5 (in mm) Continued on the following page. 30 T13E9.pdf 04.6.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Land Pattern/Mounting Holes E Type 8.0 +0 - 0.5 1.20.1 4.20.2 3.20.2 dia. (in mm) Temperature Characteristics +10 +8 +6 +4 +2 +20 -25 Z100 (NP0300ppm/C) Cap.Change (%) Cap.Change (%) Z060 (NP0200ppm/C) +55 0 -2 0 +85 Temp. (C) 0 -4 -6 -8 -8 -10 -10 0 0 -2 +4 +55 +85 Temp. (C) R500 (N750200ppm/C) Cap.Change (%) Cap.Change (%) R200 (N750300ppm/C) -25 +6 0 -2 -6 +10 +8 +6 +4 +55 +8 +2 +20 -25 -4 +2 +20 +10 +85 Temp. (C) +10 +8 +6 +4 +2 +20 -25 0 0 -2 -4 -4 -6 -6 -8 -8 -10 -10 +55 +85 Temp.(C) 7 Continued on the following page. 31 T13E9.pdf 04.6.15 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Frequency Characteristics Z060 1000 100 100 Q 1000 1000 100 100 10 10 Capacitance (pF) 1000 Capacitance (pF) Z100 Q 10 10 1 100 200 300 400 500 600 700 800 900 1000 100 200 300 400 500 600 700 800 900 1000 Frequency (MHz) Frequency (MHz) R500 R200 1000 100 Q 100 10 Q Capacitance (pF) 1000 1000 1000 100 100 10 10 10 1 100 200 300 400 500 1 600 100 200 300 400 Capacitance (pF) 1 500 Frequency (MHz) Frequency (MHz) 7 Temperature Profile Reflow Preheating (in air) Flow Solderring Gradual Cooling (in air) 230 Preheating (in air) Solderring 60 sec. to 120 sec. 5 sec. max. 250 200 Temperature (C) Temperature (C) 183 100 100 0 60 sec. to 120 sec. 30 sec. max. (Solder melting zone) 32 0 Gradual Cooling (in air) catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please T13E9.pdf 04.6.15 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Notice (Storage and operating condition) 1. Do not use the trimmer capacitor under atmosphere of RTV silicone rubber (Room Temperature Vulcanizing Silicone Rubber) except Acetone liberating silicone sealant. 2. Before using trimmer capacitor, please store under the condition of -10 to +40 degree C and 30 to 85%RH. 3. Do not store in or near corrosive gasses. 4. Use within 6 months of deliverly. 5. Do not store under direct sunlight. 6. Do not use the trimmer capacitor under the conditions listed below. (1) Corrosive gasses atmosphere (ex. Chlorine gas, Hydrogen sulfide gas, Ammonia gas, Sulfuric acid gas, Nitric oxide gas, etc.) (2) In liquid (ex. water, oil, medical liquid, organic solvent, etc.) (3) Dusty / dirty atmosphere (4) Direct sunlight (5) Static voltage nor electric/magnetic fields (6) Direct sea breeze (7) Other variations of the above Notice (Soldering and mounting) 1. Soldering (1) Can be soldered by reflow soldering method, flow soldering method, and soldering iron. (2) Standard soldering condition (a) Reflow soldering: Refer to the standard temperature profile. *Available for terminal shape A, B, and E. (b) Flow soldering: Refer to the standard temperature profile. > Immerse the body in solder bath - Available for cover film type > Only immerse the terminal in solder bath - Availabe for terminal shape C and D. (c) Soldering iron: > Temperature of tip 260+-10 degree C > Soldering time 3 sec. max. > Diameter 3mm max. > Wattage of iron 30W max. Before using other soldering conditions than those listed above, please consult with Murata factory representative prior to using. If the soldering conditions are not suitable, e.g., excessive time and/or excessive temperature, the trimmer capacitor may deviate from the specified characteristics. (3) The amount of solder is critical. (4) The thickness of solder paste should be printed from 150 micro m to 200 micro m and the dimension of land pattern should be Murata's standard land pattern used at reflow soldering. Insufficient amounts of solder can lead to insufficient soldering strength on PCB. Excessive amounts of solder may cause bridging between the terminals or contact failure due to flux wicking up. (5) When using soldering iron, the string solder shall be applied to the lower part of the terminal only. Do not apply flux except to the terminals. Excessive amounts of solder and/or applying solder to the upper part of the terminal may cause fixed rotor or contact failure due to flux invasion into the movable part and/or the contact point. The soldering iron should not come in contact with the plastic case of the trimmer capacitor. If such contact does occur, the trimmer capacitor may be damaged. (6) Our recommendable chlorine content of solder is as follows. (a) Solder paste: 0.2wt% max. (b) String solder: 0.5wt% max. (7) Do not use water-soluble flux (for water cleaning). To prevent the deterioration of trimmer capacitor characteristics, apply flux only to terminals. 2. Mounting (1) Do not apply excessive force (preferable 5.0N (Ref.; 500gf) max.), when the trimmer capacitor is mounted on the PCB. (2) Do not warp and/or bend PCB to prevent trimmer capacitor from breakage. (3) Use the suitable PCB holes which are the same pitch as the terminal of the trimmer capacitor. If it would not fit with the terminal, the excessive stress would be applied to the terminal and the trimmer capacitor may deviate from the specified characteristics (Terminal shape C and D). (4) Do not apply bending stress more than 10.0N (Ref.; 1kgf) after the trimmer capacitor has been mounted on the PCB (Terminal shape C and D). (5) Mount trimmer capacitor in contact with PCB (Terminal shape C and D). (6) In case of bending the terminals, do not apply excessive force to the body of the product and prevent the terminal fixing part from damaging. (7) Use the suitable dimension of the pick-up nozzle. > Without cover film type - External dimensions of 4.5x4.0mm and 2.5mm bore diameter. > With cover film type - 4.0mm external diameter and 2.0mm bore diameter. 3. Cleaning [with cover film type] (1) Isopropyl alcohol and Ethyl alcohol are available material for cleaning. Water group material like Pinealpha, Cleanthru can not be used. For other materials, please consult with 7 Continued on the following page. 33 catalog to prevent smoking and/or burning, Pleaseread readrating ratingand and!CAUTION !CAUTION(for (forstorage, storage,operating, operating,rating, rating,soldering, soldering,mounting mountingand andhandling) handling)ininthis thisPDF catalog to prevent smoking and/or burning, etc. etc. !Note *Please T13E9.pdf 04.6.15 you are requested approvespecifications. our product specifications or to transact approval for product before ordering. *This Thiscatalog cataloghas hasonly onlytypical typicalspecifications. specificationsTherefore, because there is no space fortodetailed Therefore, please approvethe our productsheet specifications or specifications transact the approval sheet for product specifications before ordering. Continued from the preceding page. Murata factory representative prior to using. (2) The total cleaning time by dipping, vapor and ultra-sonic method shall be less than 2 minutes. For ultra-sonic cleaning, the available condition is as follows. > Cleaning time: 1 min. max. > Power: 20W/liter max. > Frequency: 20 - 60kHz > Temperature: Ambient temperature Due to the ultra-sonic cleaning equipment's peculiar self resonance point and the cleaning compatibility usually depends on the jig construction and/or the cleaning condition such as the depth of immersion, please check the cleaning equipment to determine the suitable conditions. If the trimmer capacitor is cleaned by other conditions, the trimmer capacitor may deviate from the specified characteristics. 4. Other Note the polarity of the trimmer capacitor to minimize influence by stray capacitance. (Refer to the dimensions concerning the polarity.) Notice (Handling) 1. Use suitable screwdrivers that fit comfortably in driver slot. (1) Recommended screwdriver for manual adjustment MURATA: KMDR010 (2) Recommended screwdriver bit for automatic adjustment MURATA: KMBT010 2. When adjusting with a screwdriver, do not apply excessive force (preferable 1.0N (Ref; 100gf) max.) to minimize capacitance drift. If excessive force is applied to the screwdriver slot, it may cause deformation of the products. Notice (Other) Before using trimmer capacitor, please test after assembly in your particular mass production system. 7 34 3. Do not apply adhesive, lock paints, or any other substances to the trimmer capacitor to secure the rotor position. They may cause corrosion or electrical contact problems. 4. Do not break the cover film before the completion of PCB mounting, soldering, and cleaning. 5. Do not clean the trimmer capacitor after the cover film has been broken. 6. To break the cover film, first turn the screwdriver more than 45 deg., the set the capacitance value. (Only inserting the screwdriver cannot break the cover film.)