1x1 802.11abgn + BT4.0 + ZigBee PRODUCT BRIEF R S 9 1 1 3 RS9113 Connect-io-n(R) Module Family The RS9113 Connect-io-n(R) module is based on Redpine Signals RS9113 ultra-low-power, single spatial stream, dual-band 802.11n + Bluetooth (BT4.0) + ZigBee (ZB) Convergence SoC. The RS9113 module is a complete IEEE 802.11 a/b/g/n, ZB and BT wireless device server that provides a wireless interface to any equipment with a SDIO, UART, SPI or USB interface. The RS9113 module integrates a multi-threaded MAC processor with integrated analog peripherals and support for digital peripherals, baseband digital signal processor, analog front-end, crystal oscillator, calibration OTP memory, dual-band RF transceiver, dual-band high-power amplifiers, baluns, diplexers, diversity switch and Quad-SPI Flash thus providing a fully-integrated solution for embedded wireless applications and all WLAN, BT and ZB protocols and networking stack functionality in embedded firmware to make a fully self-contained wireless solution for a variety of applications. The module integrates an antenna and a U.FL connector for external antenna with an option to select either one of them. The M2MCombo (RS9113) chips and modules leverage and improve upon Redpine's proven low power innovations from Lite-FiTM products (RS9110) and provide WLAN 802.11n, BT4.0 and ZB convergence solution For integration into mobile and M2M communication devices. Features and Benefits RS9113 Connect-io-n module integrates WLAN, BT 4.0 and ZigBee functions. WLAN: Compliant to IEEE 802.11 a/b/g/n with dual band support. Bluetooth: Compliant to dual-mode Bluetooth V4.0 ZigBee: Compliant to IEEE 802.15.4 Supports both 20MHz and 40MHz bandwidth. WLAN transmit power up to +18dBm and receiver with sensitivity of -97dBm. Support for Bluetooth Transmit power class-1 with integrated PA and high performance Bluetooth receiver with -94dBm Rx sensitivity. Support for multiple ZigBee output powers up to +19dBm with integrated PA and high perform ance ZigBee receiver with -100dBm Rx sensitivity. U.FL connector for external antenna connection is selectable. Dual external antenna (diversity supported). Embedded WLAN stack, ZigBee stack, BT stack, TCP/IP stack, HTTP server. Support for Embedded Client mode and Access Point mode. BT profile support for GAP,SDN,PAN,SPP,IAP,HFP 1.5,GATT,ATTR,IAP,A2DP,ACRP. Supports SPI, UART, USB, SDIO host interfaces. Can operate with 8-bit microcontrollers with no OS. Single supply 3.0 to 3.6 V operation. RS9113 Module Block Diagram without integrated antenna Module without integrated antenna Applications Module with integrated antenna IoT Devices VoWi-Fi phones Music and video players Medical Devices Wi-Fi-BT gateway device Wireless headset Wi-Fi-ZB gateway device Smart Meters and in-home displays Industrial automation and telemetry Industrial monitoring and control Home and building automation Evaluation Package The evaluation package comprises RS9113 Connect-io-n module based evaluation board. This is accompanied by driver source code for host interface, firmware and documentation. RS9113 Module Block Diagram with integrated antenna Wireless Specifications Network Standard Support Data Rates Modulation Techniques 802.11n Advanced Features Bluetooth Advanced Features ZigBee Advanced Features Wi-Fi modes Bluetooth Modes ZigBee Modes QoS Host Interfaces Other Peripherals/Interfaces Supply Voltage Operating Temperature Software and Regulatory Certification Typical Transmit Power(+/-2 dBm) Rx sensitivity (+/- 1dBm) IEEE 802.11 a/b/g/n, 802.11j, 802.11d/e/i, 802.11w, 802.1X, 802.11k, 802.11v, 802.11r, 802.11h Bluetooth v2.1 EDR, v4.0 802.15.4-2009 (2.4GHz) Device Ordering Information The device numbering is based on the following naming convention. All the devices are labeled as RS9113-XYZ-ABC Where, 802.11n: from 6.5 Mbps to 150 Mbps (MCS 0-7) 802.11a/g: from 6 Mbps to 54 Mbps 802.11b: from 1 Mbps to 11 Mbps Bluetooth: 1, 2, 3Mbps 802.15.4-2009: 250Kbps OFDM with BPSK, QPSK, 16-QAM, 64-QAM 802.11b with CCK and DSSS Bluetooth: GFSK, DQPSK, 8DPSK 802.15.4-2009: DSSS 1-SS, 40MHz bandwidth, Greenfield Preamble, Short-GI, 1 spatial stream STBC, RIFS, A-MSDU, A-MPDU, Aggregation with Block-ack, A-MSDU inside A-MPDU and Virtual AP support Scatternet, Adaptive Frequency Hopping, Interlaced scanning, 15 active slaves in proprietary mode, hold, sniff and park modes CCM* security, orphan scanning, coordinator realignment Wi-Fi client, Access point, Wi-Fi Direct Master, slave, scatternet ZigBee Coordinator, Router, End device WMM and WMM Power Save Support Examples: RS9113-NBZ-S0N will refer to single band n-Link module with no antenna and integrated Wi-Fi, Bluetooth and Zigbee. RS9113-N00-D1C will refer to a dual band Connect-io-n module with embedded single antenna and integrated Wi-Fi. RS9113-NB0-S0W will refer to a single band WiSeConnect module with no antenna and integrated Wi-Fi and Bluetooth. Module Reference Design Redpine offers form-factor SPI, USB2.0, UART and SDIO reference designs along with software for manufacture testing and diagnostics. For details on availability please contact sales USB 2.0, SPI, UART I2C, I2S, SPI, QSPI, USART, GPIO, JTAG, Analog(ADC/DAC) and Ultra-low-power peripherals. 3.0-3.6V, 1.8-3.6V Industrial Grade -40C to +85C Wi-Fi Alliance Compliance (802.11bgn, WPA, WPA2 Personal and Enterprise, WMM, WMM-PS, WPS, Wi-Fi DirectTM, Voice-Personal, Protected management frames), Cisco CCX v5, Bluetooth-SIG Qualification, Worldwide Regulatory Compliance: FCC (IDs are XF6-RS9113SB, XF6-RS9113DB) IC (IDs are 8407A-RS9113SB, 8407A-RS9113DB) CE/ETSI, TELEC, SRRC Wi-Fi: Bluetooth: ZigBee : Wi-Fi: Bluetooth: ZigBee: 17.5 dBm for 802.11b DSSS 17.5 dBm for 802.11g/n OFDM 12 dBm for 802.11a/g/n OFDM 15 dBm 15 dBm 1Mbps 54 Mbps MCS7(20MHz) MCS7(40MHz) 1 Mbps 2 Mbps 3 Mbps BTLE(1Mbps) 250 Kbps -97 dBm (< 8% PER) -76.5 dBm (< 10% PER) -73 dBm (< 10% PER) -69.5 dBm (< 10% PER) -94 dBm -92 dBm -84 dBm -91 dBm -102 dBm (< 8% PER) : These features may not be supported by current software releases. Contact Repine Signals Sales (sales@redpinesignals.com) for details. : These certifications are in progress at this time. Contact Redpine Signals Sales (sales@redpinesignals.com) for more details and for certifications not listed here. : Applicable to n-Link(R) modules only For additional information, please contact Sales at Redpine Signals, Inc.: Redpine Signals, Inc. * 2107 North First Street * Suite 540 * San Jose, CA 95131 Phone: +1 408 748 3385 * Email: sales@redpinesignals.com * Website: www.redpinesignals.com Redpine Signals, Inc. reserves the right to make changes to the product(s) or information contained herein without notice. No Liability is assumed as a result of their use or application.Redpine, Redpine Signals, the Redpine logo, Driving Wireless Convergence, WiSeConnect and Lite-Fi are trademarks of Redpine Signals,Inc. All other company names, products and logos are registered trademarks of their respective companies. (c) Copyright 2016 Redpine Signals, Inc. All Rights Reserved. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Redpine Signals: RS9113-NBZ-S0C RS9113-NBZ-S1C RS9113-NBZ-D0C RS9113-NBZ-D1C RS9113-NBZ-D1C-EVB RS9113-N0ZS0C RS9113-N00-S0C RS9113-N00-D0C RS9113-N00-D1C RS9113-NB0-S0C RS9113-N0Z-S1C RS9113-N0ZD0C RS9113-NB0-D1C RS9113-N0Z-D1C RS9113-N00-S1C RS9113-NB0-D0C RS9113-NB0-S1C