MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Rev. V3 Features * * * * * * * * * * * * Functional Schematic Ideal for DECT Applications Saturated Output Power: +26 dBm Typical Power Gain: 26 dB Typical Low Current: 400 mA at PSAT Ramp Power Control Micro-Amp Shutdown Operates from 1.5 V to 4.0 V VEN configurable for either 1.7 V or 2.5 V Lead-Free 3 mm 12-Lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound RoHS* Compliant 260C Reflow Compatible VCC1 N/C VCC2 RF OUT/ VCC3 GND RF IN RF OUT/ VCC3 Ven1 RF OUT/ VCC3 Description The MAAPSS0071 is a three stage power amplifier designed for Cordless Telephone applications. This power amplifier is mounted in a standard outline, lead-free 3 mm 12-lead PQFN plastic package. The MAAPSS0071 features an integrated power enable control pin. Ordering Information Ven2, 3 N/C N/C Pin Configuration Pin No. Pin Name Description 1 GND Ground 2 RFIN RF Input 1 Part Number Package 3 VEN1 Power Enable MAAPSS0071 Bulk Packaging 4 VEN2,3 Power Enable MAAPSS0071TR-3000 3000 piece reel 5 N/C No Connection Sample Test Board (Includes 5 Samples) 6 N/C No Connection MAAPSS0071SMB 7 RFOUT / VCC3 RF Output, 3rd Stage Supply 8 RFOUT / VCC3 RF Output, 3rd Stage Supply 9 RFOUT / VCC3 RF Output, 3rd Stage Supply 10 VCC2 2nd Stage Supply 11 N/C No Connection VCC1 1st Stage Supply GND RF & DC Ground 1. Reference Application Note M513 for reel size information. Absolute Maximum Ratings 2,3 Parameter Absolute Maximum Input Power + 5 dBm Operating Supply Voltage +4.0 Volts Operating Control Voltage +3.0 Volts Operating Temperature -20C to +85C Channel Temperature +150C Storage Temperature -40C to +150C 12 Pad 4 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. 2. Exceeding any one or combination of these limits may cause permanent damage to this device. 3. M/A-COM does not recommend sustained operation near these survivability limits. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Rev. V3 Electrical Specifications: Frequency = 1905 MHz, PIN = -2 to 2 dBm, VCC = 2.4 V, VEN = 2.5 V, TA = 25 C, Z0 = 50 Parameter Test Conditions Units Min. Typ. Max Input Return Loss -- dB -- 15 -- Output Power -- dBm 24 26 27 Power Flatness 2.0 < VCC < 3.0 V dB -- 3 -- PAE -- % -- 45 -- Current -- mA -- 400 500 Current, Off VEN = 0 V A -- 3 10 Pdiss POUT = 26.0 dBm W -- 0.5 -- VEN, Low VEN, High Current 2f 3f V V mA dBc dBc 0 2.0 -- -- -- -- -- 2.0 -35 -40 0.5 2.5 4.0 -- -- VEN = 0 V dB -- 39 -- % -- -- 100 S S -- -- 3 2 -- -- Control Pins Harmonics Forward Isolation Duty Cycle Turn on/off time Ton: RF burst to NTP-1 Toff: NTP-1 to off Stability +1.5V < VCC < +3.5 V, PIN = -2 to 2 dBm, VSWR < 6:1 -20C < TC < +70C, RBW = 3 MHz max hold All spurs < -60 dBc Lead-Free 3 mm 12-Lead PQFN Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Operating the MAAPSS0071 2 The MAAPSS0071 can be damaged by electrostatic discharge (ESD). Use proper ESD control techniques when handling this device. To operate the MAAPSS0071, turn on the VCC before VEN for power on and turn off VCC after VEN for shutdown. ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Rev. V3 Evaluation Board Schematic VCC (Typ. = 2.4 V) C7 C8 C9 C6 T2 T3 L1 T4 C2 T1 C5 RF IN C1 C4 RF OUT R1 Ven (Typ. = 2.5 V) C3 MAAPSS0071 External Parts List Designator Value Footprint Manufacturer Part ID C1 1 pF 0402 Murata GRM1555C1H1R0CZ01B C2, C4 3 pF 0402 Murata GRM1555C1H3R0CZ01B C3 22 nF 0402 Murata GRM155R71C223KA01B C5, C6 47 pF 0402 Murata GRM1555C1H470JZ01B C7, C8 100 nF 0402 Murata GRM155F51C104ZA01B C9 4 pF 0402 Murata GRM155C1H4R0CZ01B R1 (VEN = 2.5 V) 470 Ohm 0402 KOA RK73B1ET470J R1 (VEN = 1.7 V) 100 Ohm 0402 KOA RK73B1ET101J L1 10 nH 0402 Coilcraft 0402CS-10NXJB Transmission Line Dimensions, 0.20 mm FR4 Length (mm) 5 Width (mm) 2.16 0.37 T2 2.54 0.37 T3 3.05 0.37 T4 3.94 0.37 Designator T1 6 5. From package edge to center of component. 6. T1 is measured from package edge (not C2) to the center of C1. Jumper Jumper 3 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Rev. V3 Typical Characteristics, VEN = 2.5 V (Using the supplied sample board BOM) POUT, PAE, ICC vs. VCC @ 1900 MHz, PIN = 0 dBm POUT, PAE, ICC vs. PIN @ 2.4 V, 1900 MHz 1.0 50 1.0 50 PAE PAE 40 30 P 0.8 40 0.6 30 0.8 0.6 P OUT OUT I 20 0.4 20 0.2 10 0.0 0 CC 0.4 I CC 10 0 -20 -15 -10 -5 0 0.2 1.5 5 2.0 2.5 3.0 3.5 0.0 4.0 VCC (V) PIN (dBm) POUT vs. Temperature @ 1900 MHz, PIN = 0 dBm 29 ICC vs. Temperature @ 1900 MHz, PIN = 0 dBm 0.6 3.0 V 0.5 28 2.4 V 3.0 V 0.4 27 2.0 V 0.3 2.4 V 26 0.2 25 0.1 2.0 V 24 -20 0 20 40 60 80 0.0 -20 0 20 40 60 80 Temperature ( C) Temperature ( C) POUT, PAE, ICC vs. Frequency @ VCC = 2.4 V, PIN = 0 dBm POUT vs. VCC @ 1900 MHz, PIN = 0 dBm 30 50 0.5 PAE P OUT 20 40 0.4 I CC 10 30 0.3 0 P OUT 2Fo 20 0.2 10 0.1 -10 3Fo -20 -30 2.0 2.2 2.4 VCC (V) 2.6 2.8 3.0 0 1.80 1.84 1.88 1.92 1.96 0.0 2.00 Frequency (GHz) 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MAAPSS0071 DECT Power Amplifier 1880 - 1930 MHz Rev. V3 Typical Characteristics (All data uses the supplied sample board BOM) S21 vs. Frequency @ VCC = 2.4 V, VEN = 2.5 V S22, S11 vs. Frequency @ VCC = 2.4 V, VEN = 2.5 V 30 0 25 -5 20 -10 15 -15 10 -20 5 -25 0 S11 S22 -30 -5 1.0 1.5 2.0 2.5 1.0 3.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Typical Characteristics, VEN = 1.7 V (All data uses the supplied sample board BOM) POUT, PAE, ICC vs. PIN @ 2.4 V, 1900 MHz POUT, PAE, ICC vs. VCC @ 1900 MHz, PIN = 0 dBm 1.0 40 1.0 40 PAE PAE 0.8 30 0.8 30 P P OUT OUT 0.6 20 0.6 20 I CC I CC 10 0 -10 -15 -10 -5 0 0.4 10 0.4 0.2 0 0.2 0.0 -10 5 0.0 2.0 2.3 2.6 V P (dBm) 2.9 CC IN POUT, PAE, ICC vs. Freq. @ 1900 MHz, PIN = 0 dBm 50 0.5 3.5 (V) POUT vs. VEN @ 2.4 V, 1900 MHz, PIN = 0 dBm 30 20 I CC 40 0.4 PAE 30 3.2 0.3 P OUT R = 100 Ohm 10 0 -10 20 0.2 10 0.1 -20 -30 -40 0 1.80 5 1.84 1.88 1.92 Frequency (GHz) 1.96 0.0 2.00 -50 0.5 1.0 1.5 V EN 2.0 2.5 (V) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice.