SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 FEATURES * * * * * * Operate From 1.65 V to 3.6 V Inputs Accept Voltages to 5.5 V Max tpd of 7.4 ns at 3.3 V Typical VOLP (Output Ground Bounce) <0.8 at VCC = 3.3 V, TA = 25C Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25C Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC) * * * Ioff Supports Partial-Power-Down Mode Operation Latch-Up Performance Exceeds 250 mA Per JESD 17 ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) - 200-V Machine Model (A115-A) - 1000-V Charged-Device Model (C101) xxxx SN54LVC646A . . . JT OR W PACKAGE SN74LVC646A . . . DB, DW, NS, OR PW PACKAGE (TOP VIEW) 24 2 23 3 22 4 21 5 20 6 19 7 18 8 17 9 16 10 15 11 14 12 13 VCC CLKBA SBA OE B1 B2 B3 B4 B5 B6 B7 B8 DIR SAB CLKAB NC VCC CLKBA SBA 1 4 A1 A2 A3 NC A4 A5 A6 5 3 2 1 28 27 26 25 6 7 24 23 8 22 21 9 20 10 19 11 12 13 14 15 16 17 18 OE B1 B2 NC B3 B4 B5 A7 A8 GND NC B8 B7 B6 CLKAB SAB DIR A1 A2 A3 A4 A5 A6 A7 A8 GND SN54LVC646A . . . FK PACKAGE (TOP VIEW) NC - No internal connection DESCRIPTION/ORDERING INFORMATION The SN54LVC646A octal bus transceiver and register is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC646A octal bus transceiver and register is designed for 1.65-V to 3.6-V VCC operation. ORDERING INFORMATION PACKAGE (1) TA Reel of 2000 SN74LVC646ADWR SOP - NS Reel of 2000 SN74LVC646ANSR LVC646A SSOP - DB Reel of 2000 SN74LVC646ADBR LC646A Tube of 60 SN74LVC646APW Reel of 2000 SN74LVC646APWR Reel of 250 SN74LVC646APWT CDIP - JT Tube of 15 SNJ54LVC646AJT SNJ54LVC646AJT CFP - W Tube of 85 SNJ54LVC646AW SNJ54LVC646AW LCCC - FK Tube of 42 SNJ54LVC646AFK SNJ54LVC646AFK TSSOP - PW -55C to 125C (1) TOP-SIDE MARKING SN74LVC646ADW SOIC - DW -40C to 85C ORDERABLE PART NUMBER Tube of 25 LVC646A LC646A Package drawings, standard packing quantities, thermal data, symboliztion, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of the Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright (c) 1993-2005, Texas Instruments Incorporated On products compliant to MIL-PRF-38535, all parameters are tested unless otherwise noted. On all other products, production processing does not necessarily include testing of all parameters. SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 DESCRIPTION/ORDERING INFORMATION (CONTINUED) These devices consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. Data on the A or B bus is clocked into the registers on the low-to-high transition of the appropriate clock (CLKAB or CLKBA) input. Figure 1 illustrates the four fundamental bus-management functions that are performed with the 'LVC646A devices. Output-enable (OE) and direction-control (DIR) inputs control the transceiver functions. In the transceiver mode, data present at the high-impedance port is stored in either register or in both. The select-control (SAB and SBA) inputs can multiplex stored and real-time (transparent mode) data. DIR determines which bus receives data when OE is low. In the isolation mode (OE high), A data is stored in one register and B data can be stored in the other register. When an output function is disabled, the input function still is enabled and can be used to store and transmit data. Only one of the two buses, A or B, can be driven at a time. Inputs can be driven from either 3.3-V or 5-V devices. This feature allows the use of these devices as translators in a mixed 3.3-V/5-V system environment. These devices are fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver. FUNCTION TABLE INPUTS (1) 2 DATA I/O OE DIR CLKAB CLKBA SAB SBA A1-A8 B1-B8 OPERATION OR FUNCTION X X X X X Input Unspecified (1) Store A, B unspecified (1) X X X X X Unspecified (1) Input Store B, A unspecified (1) H X X X Input Input Store and B data H X H or L H or L X X Input disabled Input disabled Isolation, hold storage L L X X X L Output Input Real-time B data to A bus L L X H or L X H Output Input Stored B data to A bus L H X X L X Input Output Real-time A data to B bus L H H or L X H X Input Output Stored A data to B bus The data-output functions can be enabled or disabled by various signals at OE and DIR. Data-input functions always are enabled; i.e., data at the bus terminals is stored on every low-to-high transition of the clock inputs. SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com 21 OE L 3 DIR L 1 23 CLKAB CLKBA X X 2 SAB X BUS B BUS A BUS A BUS B SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 22 SBA L 21 OE L 3 DIR H 3 DIR X X X 1 23 CLKAB CLKBA X X 2 SAB X X X STORAGE FROM A, B, OR A AND B 2 SAB L 22 SBA X BUS B BUS A BUS A 21 OE X X H 23 CLKBA X REAL-TIME TRANSFER BUS A TO BUS B BUS B REAL-TIME TRANSFER BUS B TO BUS A 1 CLKAB X 22 SBA X X X 21 OE L L 3 DIR 1 CLKAB 23 CLKBA 2 SAB 22 SBA L H X H or L H or L X X H H X TRANSFER STORED DATA TO A AND/OR B Figure 1. Bus-Management Functions 3 SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 LOGIC DIAGRAM (POSITIVE LOGIC) OE DIR CLKBA SBA CLKAB SAB 21 3 23 22 1 2 One of Eight Channels 1D C1 A1 4 20 1D C1 To Seven Other Channels Pin numbers shown are for the DB, DW, JT, NS, PW, and W packages. 4 B1 SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 Absolute Maximum Ratings (1) over operating free-air temperature range (unless otherwise noted) MIN MAX VCC Supply voltage range -0.5 6.5 V VI Input voltage range (2) -0.5 6.5 V -0.5 6.5 V -0.5 VCC + 0.5 state (2) UNIT VO Voltage range applied to any output in the high-impedance or power-off VO Voltage range applied to any output in the high or low state (2) (3) IIK Input clamp current VI < 0 -50 mA IOK Output clamp current VO < 0 -50 mA IO Continuous output current 50 mA 100 mA Continuous current through VCC or GND JA Package thermal impedance (4) Tstg (1) (2) (3) (4) DB package 63 DW package 46 NS package 65 PW package 88 Storage temperature range -65 V C/W C 150 Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed. The value of VCC is provided in the recommended operating conditions table. The package thermal impedance is calculated in accordance with JESD 51-7. Recommended Operating Conditions (1) SN54LVC646A VCC Supply voltage VIH High-level input voltage Operating Data retention only SN74LVC646A MIN MAX MIN MAX 2 3.6 1.65 3.6 1.5 1.5 VCC = 2.3 V to 2.7 V 1.7 2 Low-level input voltage 0.35 x VCC VCC = 2.3 V to 2.7 V 0.7 VCC = 2.7 V to 3.6 V VI Input voltage VO Output voltage 0.8 High-level output current 0 5.5 5.5 High or low state 0 VCC VCC 3-state 0 5.5 5.5 Low-level output current t/v Input transition rise or fall rate TA Operating free-air temperature (1) V V -4 VCC = 2.3 V -8 VCC = 2.7 V -12 -12 VCC = 3 V -24 -24 VCC = 1.65 V IOL V 0.8 VCC = 1.65 V IOH V 2 VCC = 1.65 V to 1.95 V VIL V 0.65 x VCC VCC = 1.65 V to 1.95 V VCC = 2.7 V to 3.6 V UNIT mA 4 VCC = 2.3 V 8 VCC = 2.7 V 12 12 VCC = 3 V 24 24 10 -55 125 -40 mA 10 ns/V 85 C All unused inputs of the device must be held at VCC or GND to ensure proper device operation. Refer to the TI application report, Implications of Slow or Floating CMOS Inputs, literature number SCBA004. 5 SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 Electrical Characteristics over recommended operating free-air temperature range (unless otherwise noted) PARAMETER TEST CONDITIONS 2.7 V to 3.6 V UNIT VCC - 0.2 1.2 1.7 2.7 V 2.2 2.2 3V 2.4 2.4 3V 2.2 2.2 V 1.65 V to 3.6 V 0.2 2.7 V to 3.6 V 0.2 IOL = 4 mA 1.65 V 0.45 IOL = 8 mA 2.3 V 0.7 IOL = 12 mA 2.7 V 0.4 0.4 IOL = 24 mA 3V 0.55 0.55 5 5 A VI = 0 to 5.5 V 3.6 V VI or VO = 5.5 V 0 IOZ (2) VO = 0 to 5.5 V 3.6 V VI = VCC or GND 3.6 V VI 5.5 V (3) IO = 0 One input at VCC - 0.6 V, Other inputs at VCC or GND ICC TYP (1) MAX VCC - 0.2 2.3 V Ioff ICC MIN IOH = -8 mA IOL = 100 A Control inputs SN74LVC646A TYP (1) MAX 1.65 V IOH = -24 mA II MIN IOH = -4 mA IOH = -12 mA VOL SN54LVC646A 1.65 V to 3.6 V IOH = -100 A VOH VCC 3.6 V 2.7 V to 3.6 V V 10 A 15 10 A 10 10 10 10 500 500 A A Ci Control inputs VI = VCC or GND 3.3 V 4.5 4.5 pF Cio A or B port VO = VCC or GND 3.3 V 7.5 7.5 pF VCC = 3.3 V 0.3 V UNIT (1) (2) (3) All typical values are at VCC = 3.3 V, TA = 25C. For I/O ports, the parameter IOZ includes the input leakage current. This applies in the disabled state only. Timing Requirements over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2) SN54LVC646A VCC = 2.7 V MIN MAX MIN Clock frequency tw Pulse duration 3.3 3.3 ns tsu Setup time, data before CLK 1.6 1.5 ns th Hold time, data after CLK 1.7 1.7 ns 6 150 MAX fclock 150 MHz SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 Timing Requirements over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2) SN74LVC646A VCC = 1.8 V 0.18 V VCC = 2.5 V 0.2 V MIN MIN MAX MAX (1) VCC = 2.7 V MIN MAX (1) VCC = 3.3 V 0.3 V MIN MAX fclock Clock frequency tw Pulse duration (1) (1) 3.3 3.3 ns tsu Setup time, data before CLK (1) (1) 1.6 1.5 ns th Hold time, data after CLK (1) (1) 1.7 1.7 ns (1) 150 UNIT 150 MHz This information was not available at the time of publication. Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2) SN54LVC646A FROM (INPUT) PARAMETER TO (OUTPUT) VCC = 2.7 V MIN fmax MAX 150 A or B tpd B or A CLK A or B SBA or SAB ten VCC = 3.3 V 0.3 V MIN UNIT MAX 150 MHz 7.9 1 7.4 8.8 1 8.4 9.9 1 8.6 10.2 1 8.2 ns ns OE A tdis OE A 8.9 1 7.5 ns ten DIR B 10.4 1 8.3 ns tdis DIR B 8.7 1 7.9 ns Switching Characteristics over recommended operating free-air temperature range (unless otherwise noted) (see Figure 2) SN74LVC646A PARAMETER FROM (INPUT) TO (OUTPUT) VCC = 1.8 V 0.15 V MIN A or B tpd CLK SBA or SAB (1) MAX (1) fmax B or A A or B VCC = 2.5 V 0.2 V MIN MAX (1) VCC = 2.7 V MIN MAX 150 VCC = 3.3 V 0.3 V MIN UNIT MAX 150 MHz (1) (1) (1) (1) 7.9 1 7.4 (1) (1) (1) (1) 8.8 1 8.4 (1) (1) (1) (1) ns 9.9 1 8.6 ten OE A (1) (1) (1) (1) 10.2 1 8.2 ns tdis OE A (1) (1) (1) (1) 8.9 1 7.5 ns (1) (1) (1) 10.4 1 8.3 ns (1) (1) (1) 8.7 1 7.9 ns ten DIR B (1) tdis DIR B (1) This information was not available at the time of publication. 7 SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 Operating Characteristics TA = 25C PARAMETER Cpd (1) 8 Power dissipation capacitance per transceiver TEST CONDITIONS Outputs enabled Outputs disabled This information was not available at the time of publication. f = 10 MHz VCC = 1.8 V VCC = 2.5 V VCC = 3.3 V TYP TYP TYP (1) (1) 75 (1) (1) 9 UNIT pF SN54LVC646A, SN74LVC646A OCTAL BUS TRANSCEIVERS AND REGISTERS WITH 3-STATE OUTPUTS www.ti.com SCAS302J - JANUARY 1993 - REVISED AUGUST 2005 PARAMETER MEASUREMENT INFORMATION VLOAD S1 RL From Output Under Test CL (see Note A) Open GND RL TEST S1 tPLH/tPHL tPLZ/tPZL tPHZ/tPZH Open VLOAD GND LOAD CIRCUIT INPUTS VCC 1.8 V 0.15 V 2.5 V 0.2 V 2.7 V 3.3 V 0.3 V VI tr/tf VCC VCC 2.7 V 2.7 V 2 ns 2 ns 2.5 ns 2.5 ns VM VLOAD CL RL V VCC/2 VCC/2 1.5 V 1.5 V 2 x VCC 2 x VCC 6V 6V 30 pF 30 pF 50 pF 50 pF 1 k 500 500 500 0.15 V 0.15 V 0.3 V 0.3 V VI Timing Input VM 0V tw tsu VI Input VM VM th VI Data Input VM VM 0V 0V VOLTAGE WAVEFORMS PULSE DURATION VOLTAGE WAVEFORMS SETUP AND HOLD TIMES VI VM Input VM 0V tPLH VM VM VOL tPHL VM VM 0V Output Waveform 1 S1 at VLOAD (see Note B) tPLH tPLZ VLOAD/2 VM tPZH VOH Output VM tPZL tPHL VOH Output VI Output Control VM VOL VOLTAGE WAVEFORMS PROPAGATION DELAY TIMES INVERTING AND NONINVERTING OUTPUTS Output Waveform 2 S1 at GND (see Note B) VOL + V VOL tPHZ VM VOH - V VOH 0 V VOLTAGE WAVEFORMS ENABLE AND DISABLE TIMES LOW- AND HIGH-LEVEL ENABLING NOTES: A. CL includes probe and jig capacitance. B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control. C. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 . D. The outputs are measured one at a time, with one transition per measurement. E. tPLZ and tPHZ are the same as tdis. F. tPZL and tPZH are the same as ten. G. tPLH and tPHL are the same as tpd. H. All parameters and waveforms are not applicable to all devices. Figure 2. Load Circuit and Voltage Waveforms 9 PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp ACTIVE LCCC FK 28 1 TBD Call TI Call TI 5962-9762601QKA ACTIVE CFP W 24 1 TBD Call TI Call TI 1 TBD Call TI Call TI TBD Call TI Call TI 5962-9762601QLA ACTIVE CDIP JT 24 SN74LVC646ADBLE OBSOLETE SSOP DB 24 SN74LVC646ADBR ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646ADBRE4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646ADBRG4 ACTIVE SSOP DB 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646ADW ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646ADWE4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646ADWG4 ACTIVE SOIC DW 24 25 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APW ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWE4 ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWG4 ACTIVE TSSOP PW 24 60 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWLE OBSOLETE TSSOP PW 24 SN74LVC646APWR ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWRE4 ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWRG4 ACTIVE TSSOP PW 24 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWT ACTIVE TSSOP PW 24 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SN74LVC646APWTE4 ACTIVE TSSOP PW 24 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Addendum-Page 1 Call TI Samples (Requires Login) 5962-9762601Q3A TBD (3) Call TI PACKAGE OPTION ADDENDUM www.ti.com Orderable Device 5-Sep-2011 Status (1) Package Type Package Drawing Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) SN74LVC646APWTG4 ACTIVE TSSOP PW 24 250 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM SNJ54LVC646AFK ACTIVE LCCC FK 28 1 TBD SNJ54LVC646AJT ACTIVE CDIP JT 24 1 TBD A42 N / A for Pkg Type SNJ54LVC646AW ACTIVE CFP W 24 1 TBD A42 N / A for Pkg Type POST-PLATE N / A for Pkg Type (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. OTHER QUALIFIED VERSIONS OF SN54LVC646A, SN74LVC646A : * Catalog: SN74LVC646A * Military: SN54LVC646A Addendum-Page 2 PACKAGE OPTION ADDENDUM www.ti.com 5-Sep-2011 * Space: SN54LVC646A-SP NOTE: Qualified Version Definitions: * Catalog - TI's standard catalog product * Military - QML certified for Military and Defense Applications * Space - Radiation tolerant, ceramic packaging and qualified for use in Space-based application Addendum-Page 3 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant SN74LVC646ADBR SSOP DB 24 2000 330.0 16.4 8.2 8.8 2.5 12.0 16.0 Q1 SN74LVC646APWR TSSOP PW 24 2000 330.0 16.4 6.95 8.3 1.6 8.0 16.0 Q1 SN74LVC646APWT TSSOP PW 24 250 330.0 16.4 6.95 8.3 1.6 8.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) SN74LVC646ADBR SSOP DB 24 2000 367.0 367.0 38.0 SN74LVC646APWR TSSOP PW 24 2000 367.0 367.0 38.0 SN74LVC646APWT TSSOP PW 24 250 367.0 367.0 38.0 Pack Materials-Page 2 MECHANICAL DATA MCER004A - JANUARY 1995 - REVISED JANUARY 1997 JT (R-GDIP-T**) CERAMIC DUAL-IN-LINE 24 LEADS SHOWN PINS ** A 13 24 B 1 24 28 A MAX 1.280 (32,51) 1.460 (37,08) A MIN 1.240 (31,50) 1.440 (36,58) B MAX 0.300 (7,62) 0.291 (7,39) B MIN 0.245 (6,22) 0.285 (7,24) DIM 12 0.070 (1,78) 0.030 (0,76) 0.100 (2,54) MAX 0.320 (8,13) 0.290 (7,37) 0.015 (0,38) MIN 0.200 (5,08) MAX Seating Plane 0.130 (3,30) MIN 0.023 (0,58) 0.015 (0,38) 0-15 0.014 (0,36) 0.008 (0,20) 0.100 (2,54) 4040110/C 08/96 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Index point is provided on cap for terminal identification. Falls within MIL STD 1835 GDIP3-T24, GDIP4-T28, and JEDEC MO-058 AA, MO-058 AB POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MCFP007 - OCTOBER 1994 W (R-GDFP-F24) CERAMIC DUAL FLATPACK 0.375 (9,53) 0.340 (8,64) Base and Seating Plane 0.006 (0,15) 0.004 (0,10) 0.090 (2,29) 0.045 (1,14) 0.045 (1,14) 0.026 (0,66) 0.395 (10,03) 0.360 (9,14) 0.360 (9,14) 0.240 (6,10) 1 0.360 (9,14) 0.240 (6,10) 24 0.019 (0,48) 0.015 (0,38) 0.050 (1,27) 0.640 (16,26) 0.490 (12,45) 0.030 (0,76) 0.015 (0,38) 12 13 30 TYP 1.115 (28,32) 0.840 (21,34) 4040180-5 / B 03/95 NOTES: A. B. C. D. E. All linear dimensions are in inches (millimeters). This drawing is subject to change without notice. This package can be hermetically sealed with a ceramic lid using glass frit. Falls within MIL-STD-1835 GDFP2-F24 and JEDEC MO-070AD Index point is provided on cap for terminal identification only. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 MECHANICAL DATA MSSO002E - JANUARY 1995 - REVISED DECEMBER 2001 DB (R-PDSO-G**) PLASTIC SMALL-OUTLINE 28 PINS SHOWN 0,38 0,22 0,65 28 0,15 M 15 0,25 0,09 8,20 7,40 5,60 5,00 Gage Plane 1 14 0,25 A 0-8 0,95 0,55 Seating Plane 2,00 MAX 0,10 0,05 MIN PINS ** 14 16 20 24 28 30 38 A MAX 6,50 6,50 7,50 8,50 10,50 10,50 12,90 A MIN 5,90 5,90 6,90 7,90 9,90 9,90 12,30 DIM 4040065 /E 12/01 NOTES: A. B. C. D. All linear dimensions are in millimeters. This drawing is subject to change without notice. Body dimensions do not include mold flash or protrusion not to exceed 0,15. Falls within JEDEC MO-150 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated