Supertex inc. TP2104 P-Channel Enhancement-Mode Vertical DMOS FET Features General Description High input impedance and high gain Low power drive requirement Ease of paralleling Low CISS and fast switching speeds Excellent thermal stability Integral source-drain diode Free from secondary breakdown This low threshold, enhancement-mode (normally-off) transistor utilizes a vertical DMOS structure and Supertex's wellproven, silicon-gate manufacturing process. This combination produces a device with the power handling capabilities of bipolar transistors and the high input impedance and positive temperature coefficient inherent in MOS devices. Characteristic of all MOS structures, this device is free from thermal runaway and thermally-induced secondary breakdown. Applications Logic level interfaces - ideal for TTL and CMOS Solid state relays Analog switches Power management Telecom switches Ordering Information Part Number Product Summary Package Option Packing TP2104K1-G TO-236AB (SOT-23) 3000/Reel TP2104N3-G 3-Lead TO-92 1000/Bag TP2104N3-G P002 RDS(ON) BVDSS/BVDGS VGS(th) (max) (max) -40V 6.0 -2.0V Pin Configuration TP2104N3-G P003 TP2104N3-G P005 Supertex's vertical DMOS FETs are ideally suited to a wide range of switching and amplifying applications where very low threshold voltage, high breakdown voltage, high input impedance, low input capacitance, and fast switching speeds are desired. 3-Lead TO-92 2000/Reel TP2104N3-G P013 DRAIN TP2104N3-G P014 DRAIN SOURCE -G denotes a lead (Pb)-free / RoHS compliant package. Contact factory for Wafer / Die availablity. Devices in Wafer / Die form are lead (Pb)-free / RoHS compliant. GATE Absolute Maximum Ratings TO-236AB (SOT-23) Parameter Value Drain-to-source voltage BVDSS Drain-to-gate voltage BVDGS Gate-to-source voltage 20V Operating and storage temperature -55 C to +150OC O Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Typical Thermal Resistance Package ja TO-236AB (SOT-23) 203OC/W TO-92 132OC/W Doc.# DSFP-TP2104 B081313 SOURCE TO-92 GATE Product Marking P1LW W = Code for week sealed = "Green" Packaging Package may or may not include the following marks: Si or TO-236AB (SOT-23) SiTP 2 1 0 4 YYWW YY = Year Sealed WW = Week Sealed = "Green" Packaging Package may or may not include the following marks: Si or TO-92 Supertex inc. www.supertex.com TP2104 Thermal Characteristics (continuous) ID ID Power Dissipation (pulsed) @TA = 25OC TO-236AB (SOT-23) -160mA -800mA TO-92 -175mA -1.0A Package IDR IDRM 0.36W -160mA -800mA 0.74W -175mA -1.0A ID (continuous) is limited by max rated Tj . Electrical Characteristics (T = 25C unless otherwise specified) A Sym Parameter Min Typ Max Units BVDSS Drain-to-source breakdown voltage -40 - - V VGS = 0V, ID = -1.0mA VGS(th) Gate threshold voltage -1.0 - -2.0 V VGS = VDS, ID= -1.0mA Change in VGS(th) with temperature - 5.8 6.5 O mV/ C VGS = VDS, ID= -1.0mA Gate body leakage - -1.0 -100 nA VGS = 20V, VDS = 0V - -10 A VGS = 0V, VDS = Max Rating - -1.0 mA VDS = 0.8 Max Rating, VGS = 0V, TA = 125C - - A VGS = -10V, VDS = -25V - 10 - 6.0 VGS(th) IGSS IDSS Zero gate voltage drain current ID(ON) On-state drain current RDS(ON) RDS(ON) -0.6 - Change in RDS(ON) with temperature - 0.55 1.0 %/ C VGS = -10V, ID = -500mA 150 200 - mmho VDS = -25V, ID = -500mA Forward transconductance CISS Input capacitance - 35 60 COSS Common source output capacitance - 22 30 CRSS Reverse transfer capacitance - 8.0 10 td(ON) Turn-on delay time - 4.0 6.0 Rise time - 4.0 8.0 Turn-off delay time - 5.0 9.0 Fall time - 5.0 8.0 Diode forward voltage drop - -1.2 Reverse recovery time - 400 td(OFF) tf VSD trr VGS = -4.5V, ID = -50mA Static drain-to-source on-state resistance GFS tr Conditions O VGS = -10V, ID = -500mA pF VGS = 0V, VDS = -25V, f = 1.0 MHz ns VDD = -25V, ID = -500mA, RGEN = 25 -2.0 V VGS = 0V, ISD = -500mA - ns VGS = 0V, ISD = -500mA Notes: 1. All D.C. parameters 100% tested at 25OC unless otherwise stated. (Pulse test: 300s pulse, 2% duty cycle.) 2. All A.C. parameters sample tested. Switching Waveforms and Test Circuit 0V INPUT -10V Pulse Generator 10% td(ON) 0V OUTPUT VDD Doc.# DSFP-TP2104 B081313 tr td(OFF) 90% 10% RGEN 90% t(OFF) t(ON) D.U.T. tf INPUT OUTPUT RL 90% 10% 2 VDD Supertex inc. www.supertex.com TP2104 Typical Performance Curves BVDSS Variation with Temperature 1.1 20 On-Resistance vs. Drain Current VGS = -4.5V RDS(ON) (ohms) BVDSS (normalized) 16 1.0 12 VGS = -10V 8.0 4.0 0.9 -50 100 0 150 0 -0.4 -0.6 -0.8 -1.2 -2.0 O Tj ( C) ID (amperes) Transfer Characteristics VGS(th) and RDS(ON) Variation with Temperature 1.2 VDS = -25OC -1.6 -1.2 25OC -0.8 125OC -0.4 RDS(ON) @ -10V, -0.5A 1.1 TA = -55OC VGS(th) (normalized) ID (amperes) 50 1.6 1.4 1.0 VGS(th) @ -1.0mA 1.2 0.9 1.0 RDS(ON) (normalized) -2.0 0 0.8 0.8 0 0 -2.0 -4.0 -6.0 -8.0 0.7 -50 10 VGS (volts) 0 50 100 150 Tj (OC) Capacitance vs. Drain-to-Source Voltage Gate Drive Dynamic Characteristics -10 100 VDS = -10V f = 1.0MHz -8.0 VGS (volts) C (picofarads) 75 50 CISS 25 -6.0 VDS = -40V -4.0 125 pF COSS -2.0 CRSS 0 0 -10 -20 -30 35 pF 0 -40 VDS (volts) Doc.# DSFP-TP2104 B081313 0 0.5 1.0 1.5 2.0 2.5 QG (nanocoulombs) 3 Supertex inc. www.supertex.com TP2104 Typical Performance Curves (cont.) Output Characteristics -2.0 Saturation Characteristics -2.0 VGS = -10V -1.6 -8V -1.2 -0.8 ID (amperes) ID (amperes) -1.6 -6V -0.4 -1.2 VGS = -10V -8V -0.8 -6V -0.4 -4V -4V 0 -3V 0 -10 -20 -30 -40 0 -50 -3V 0 -2.0 -4.0 VDS (volts) 1.0 -10 Power Dissipation vs. Temperature VDS = -25V 0.8 0.4 PD (watts) TA = -55OC 0.3 GFS (siemens) -8.0 VDS (volts) Transconductance vs. Drain Current 0.5 -6.0 25OC 0.2 0.6 0.4 SOT-23 125OC 0.1 0 TO-92 0.2 -0.2 0 -0.4 -0.6 -0.8 0 -1.0 0 25 50 ID (amperes) 75 100 125 150 TA (OC) Maximum Rated Safe Operating Area -1.0 1.0 Thermal Response Characteristics Thermal Resistance (normalized) SOT-23 (pulsed) SOT-23 (DC) ID (amperes) -0.1 -0.01 TA = 25OC -0.001 -0.1 -1.0 -10 SOT-23 PD = 0.36W TA = 25OC 0.6 0.4 0.2 0 -100 TO-92 PD = 1.0W TC = 25OC 0.001 0.01 0.1 1.0 10 tP (seconds) VDS (volts) Doc.# DSFP-TP2104 B081313 0.8 4 Supertex inc. www.supertex.com TP2104 3-Lead TO-236AB (SOT-23) Package Outline (K1) 2.90x1.30mm body, 1.12mm height (max), 1.90mm pitch D 3 E1 E Gauge Plane 0.25 1 e b e1 Seating Plane L L1 2 View B Top View View B A A A2 Seating Plane A1 Side View Symbol Dimension (mm) View A - A A A A1 A2 b D E E1 MIN 0.89 0.01 0.88 0.30 2.80 2.10 1.20 NOM - - 0.95 - 2.90 - 1.30 MAX 1.12 0.10 1.02 0.50 3.04 2.64 1.40 e 0.95 BSC e1 1.90 BSC L 0.20 0.50 0.60 L1 0.54 REF 0O 8O JEDEC Registration TO-236, Variation AB, Issue H, Jan. 1999. This dimension differs from the JEDEC drawing. Drawings not to scale. Supertex Doc.#: DSPD-3TO236ABK1, Version C041309. Doc.# DSFP-TP2104 B081313 5 Supertex inc. www.supertex.com TP2104 3-Lead TO-92 Package Outline (N3) D A Seating Plane 1 2 3 L c b e1 e Side View Front View E1 E 1 3 2 Bottom View Symbol Dimensions (inches) A b c MIN .170 .014 NOM - - MAX .210 .022 .014 D E E1 e e1 L .175 .125 .080 .095 .045 .500 - - - - - - .205 .165 .105 .105 .055 .610* .022 JEDEC Registration TO-92. * This dimension is not specified in the JEDEC drawing. This dimension differs from the JEDEC drawing. Drawings not to scale. Supertex Doc.#: DSPD-3TO92N3, Version E041009. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate "product liability indemnification insurance agreement." Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. (c)2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-TP2104 B081313 6 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com