SURFACE MOUNT CLOCK OSCILLATOR CSMF SERIES: Multi-Frequency Oscillator with Low Jitter Output 10MHz - 1200MHz PRODUCT DESCRIPTION The CSMF clock series is a cutting edge family of High Frequency, Low Jitter Output, Multi-Frequency Clock Oscillators based on an advanced digital PLL platform. The CSMF clocks are available in a 7x5mm ceramic package with output frequency from 10MHz to 1.2 GHz. The CSMF units are pre-programmed with up to 2 different output frequencies, any of which are user selected. Such flexibility significantly reduces design cycle time and overall cost. The CSMF clock design incorporates a low frequency crystal along with low Jitter frequency synthesizer to provide a wide range of frequencies. The CSMF Clocks are available in LVCMOS, LVPECL and LVDS outputs, making them suitable for a wide range of applications. APPLICATION SONET/SDH FIBRE CHANNEL 10G,100G, GIGABIT ETHERNET CLOCK / DATA RECOVERY TEST AND MEASUREMENT ELECTRICAL SPECIFICATION PARAMETER Frequency, nominal Supply voltage, nom. Supply current LVPECL output levels LVPECL output voltage swing LVDS differential output voltage LVDS offset voltage, typical LVCMOS / LVTTL output levels Duty cycle Rise/ fall time, max. RMS phase jitter 1 Overall freq. stability, max. Enable / Disable Operating temperature Storage temperature Absolute voltage range SYMBOL fO VCC Is VOH VOL Vp-p VOD VOS VOH / VOL DC tr / tf J f/fc En / Dis Ta T(stg) Vcc(abs) CONDITIONS Up to 2 available output frequencies Typical (depending on output) Output termination 50 ~ Vcc - 2.0V Output termination 50 ~ Vcc - 2.0V 100 termination between outputs min/max Load = 10k // 20pF 20% - 80% (VOL, VOH) Typical Various available, specified when ordered Min (logic 1) / Max (logic 0) Absolute max VALUE UNIT 10 -1200 2.5 or 3.3 35 ~ 45 Vcc -1.4 ~ Vcc - 0.9 Vcc - 2.0 ~ Vcc - 1.7 0.6 ~ 1.0 350 1.25 0.7Vcc / 0.3Vcc 40/60 or 45/55 0.6 0.8 20 ~ 100. 0.7 (Vcc) / 0.3 (Vcc) -40 ~ +85 -45 ~ +100 Vcc 0.5 MHz V mA V V V mV V V % ns ps ppm V C C V Notes 1 See part numbering table 2 Contact factory RALTRON 10651 N.W. 19th St Miami, Florida 33172 U.S.A. Phone: (305) 593-6033 Fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com SURFACE MOUNT CLOCK OSCILLATOR MECHANICAL SPECIFICATION INDICATES PIN 1. .197 .008 5.0 0.2 OUTLINE TOLERANCE IF NOT SPECIFIED: 0.015" / 0.4mm .276 .008 7.0 0.2 .200 5.08 .100 2.54 2 5 .129 3.28 .079 TYP. 2.00 TYP. 4 MARKING: CSMF293 - (family) ASH X-Y- (frequency codes) R D/C - (factory date code) 3 .087 2.20 .150 3.81 6 [2] ENABLE / DISABLE [3] GROUND [4] OUTPUT [5] COMP. OUTPUT [6] SUPPLY VOLTAGE .079 MAX. 2.00 MAX. .050 1.27 1 PIN FUNCTIONS: 3 [1] FREQ SELECT (SEL) 4 .055 TYP. 1.40 .071 1.80 *0.01uF external bypass capacitor is recommended as seen in solder pattern ** RoHS compliant .100 2.54 SOLDER PATTERN Notes 3 Frequency Select pin (SEL) Logic 1 (NC) = Output Frequency 1 (First frequency listed in part # is automatically available. Customer specified at time of order) Logic 0 = Output Frequency 2 (Second frequency listed in part # is available. Customer sets SEL pin to Low) 4 Enable / Disable feature is available on either pin 1 or pin 2. See options on part numbering table. PART NUMBERING SYSTEM: SERIES NUMBER OF OUTPUTS OUTPUT SUPPLY VOLTAGE (V) SYMMETRY (%) Surface mount Multifrequency Clock Oscillator 1: Single Output 2: Dual Output 9: LVPECL 8: LVDS 4: LVCMOS 1: Vcc =2.5 3: Vcc =3.3 A: 40/60 T: 45/55 CSMF 2 9 3 A TEMP RANGE (C) R: 0~50 S: 0~70 U: -20~70 V: -40~85 S FREQUENCY STABILITY (ppm) K: 20 I: 25 H: 50 J: 100 H ENABLE / DISABLE PIN OUTPUT FREQUENCY (MHz) 1: Pin 1 2: Pin 2 XXX.XXX-YYY.YYY Freq1- Freq 2 2 - XXX-YYY EXAMPLE: CSMF293ASH2-622-311 Clock Oscillator, 7x5mm package, Dual output, LVPECL, +3.3V Supply, 40/60 Symmetry, 0~+70C Operating Temperature Range, 50ppm overall Frequency Stability, Enable/Disable on pin 2, 622.080 MHz and 311.040MHz output frequency. RALTRON 10651 N.W. 19th St Miami, Florida 33172 U.S.A. Phone: (305) 593-6033 Fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com SURFACE MOUNT CLOCK OSCILLATOR REFLOW PROFILE: tP TP Critical Zone TL to TP Ramp-up TL tL TSMAX Temp. [C] TSMIN Ramp-down tS Preheat t[25C] to Peak Temperature Min Preheat Temperature Max Preheat Time (TSMIN to TSMAX) Temperature Peak Temperature Ramp-up rate Ramp-down rate Time within 5C of Peak Temperature Time t[25C] to Peak Temperature Time Time [sec] Reflow profile IPC/JEDEC J-STD-020 REV. C TSMIN TSMAX tS TL TP RUP RDOWN tP t[25C] to Peak tL 150C 200C 60-180 sec. 217C 260C 3C/sec max. 6C/sec max. 20-40 sec. 480 sec. 60-150 sec. RALTRON 10651 N.W. 19th St Miami, Florida 33172 U.S.A. Phone: (305) 593-6033 Fax: (305) 594-3973 e-mail: sales@raltron.com web: http://www.raltron.com