3MTM CF Card Header CompactFlashTM Type I, Surface Mount 7E50 Series * * * * * Meets CFA standards Single row solder tails with 0.635 mm spacing Board component clearance with 1.64 mm standoff Ejector option for easy removal of CF Card Retainer clip option permits stability for mobile and high vibration applications * RoHS Compliant. See the Regulatory Information Appendix (RIA) in the "RoHS Compliance" section of www.3Mconnectors.com for compliance information (RIA E1 and C1 apply) Date Modified: July 25, 2014 Physical TS-0662-D Sheet 1 of 4 Insulation Material: Liquid Crystal Polyester (LCP) Flammability: UL 94V-0 Color: Beige Contact Material: Copper Alloy Plating Underplating: 100 [ 2.54 m ] Nickel Wiping Area: Gold flash over 80/20 Palladium Nickel, Lubricated (see Ordering Information) Solder Tails: Gold flash (see Ordering Information) Marking 3M Logo, Part Number on Ejector Only Electrical Current Rating: .5 A Insulation Resistance: >1 x 109 at 500 VDC, >1 x 108 at 500 VDC after Environmental Conditioning Withstanding Voltage: 500 VRMS at Sea Level Current Rating: Insulation Resistance and Withstanding Voltage Environmental Temperature Rating: -55C to +85C Process Rating: 260C (per J-STD-020C) UL File No.: E68080 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com CompactFlash is a registered trademark of Sandisk Corporation. 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM CF Card Header CompactFlashTM Type I, Surface Mount 2X O 2.20 [ .087 ] 40.16 [ 1.581 ] 0.635 Typ [ .0250 ] Pin 1 Pin 50 Pin 25 Pin 26 Pin 13 7E50 Series Pin Type Interface Dim A Pin No. detect 3.50 [.138] 25, 26 general 4.25 [.167] all other pins power 5.00 [.197] 1, 3, 38 & 50 2X 2.71 [ .107 ] 6.64 0.08 [ .261 ] Pin 38 1.00 [ .039 ] 0.75 [ .030 ] A 2X 4.00 [ .157 ] O1.50 [ .059 ] 26.5 [ 1.04 ] -A- 23.5 [ .93 ] A 16.0 [ .63 ] 19.00 [ .748 ] 2.54 [ .100 ] 35.9 [ 1.41 ] 46.6 [ 1.83 ] 2X 2.00 [ .079 ] 1.40 0.05 [ .055 ] (See note ) 11.3 [ .44 ] 1.50 [ .059 ] 1.8 [ .07 ] 43.03 0.06 [ 1.694 ] 30.48 Ref [ 1.200 ] Pin 25 Pin 1 Pin 50 Pin 38 Pin 26 Pin 13 -A- -B- 1.75 [ .069 ] 2.00 [ .079 ] 11.0 [ .43 ] 9.50 [ .374 ] 0.64 [ .025 ] 3.50 [ .138 ] A 4.5 [ .18 ] 1.27 Typ [ .050 ] 40.16 [ 1.58 ] .79 0.05 [ .031 ] (See note) 2X .89 0.05 [ .035 ] 2.5 [ .098 ] 3.50 0.08 [ .138 ] 5.00 [ .197 ] Section A-A mm [inch] Tolerance Unless Noted mm Note: Normal (Option "7" ) style shown. For inverse style rotate polarization keys and pin call outs 180. .00 .15 .000 [ ] Dimensions for Reference only N7E50-X516XX-20-XX Options: CF Card Polarization 7 = Normal A = Inverse .0 .3 (RIA E1 & C1 apply) Options: T&R WF = 72 mm Plating: PG = Au Flash over 25 " [0.64 m] PdNl Lubricated with Au Flash tails PK = Au Flash over 20 " [0.5 m] PdNl Lubricated with Au Flash tails TS-0662-D Sheet 2 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 3MTM CF Card Header CompactFlashTM Type I, Surface Mount 7E50 Series 46.13 0.15 [ 1.816 ] 2X 3.00 0.15 [ .118 ] 3.50 0.05 [ .138 ] 40.16 0.10 [ 1.581 ] 3.00 0.10 [ .118 ] Detail A 7.55 0.05 [ .297 ] 2X 5.0 0.15 [ .197 ] 2X O2.20 0.05 [ .087 ] ( Through for M2 ) 2.00 0.15 [ .079 ] 2X O1.70 0.03 [ .067 ] ( Through for locating Boss ) 20.5 Min [ .81 ] 40.16 0.05 [ 1.581 ] The End of P.C. Board The Direction of Inserting Card Recommended PCB Solder Pad Pattern 31.11 0.05 [ 1.225 ] 0.635 0.030 Typ [ .0250 ] 0.40 0.03 Typ [ .016 ] Pin 26 Pin 1 ( Normal ) Pin 26 Pin 1 ( Inverse ) Detail A TS-0662-D Sheet 3 of 4 3 Electronic Solutions Division Interconnect Solutions http://www.3Mconnectors.com 3M is a trademark of 3M Company. For technical, sales or ordering information call 800-225-5373 Right Button Ejector 3M Part D7E50-7316-03 ( Order Separately - See note ) Centerline of Header 7.0 Ref [ .28 ] for sliding length 26.5 [ 1.04 ] 4.0 [ .16 ] Ejecting Length 43.9 Ref [ 1.73 ] 17.4 Ref [ .69 ] 7.0 [ .28 ] Pushing Length Marking Area 0.75 Ref [ .030 ] 4.0 [ .16 ] 25.81 Ref [ 1.016 ] 23.82 Ref [ .938 ] 52.1 [ 2.05 ] 5.5 [ .22 ] Material Holder: Glass Filled LCP Button: PBT Plate: Stainless Steel 7.1 [ .28 ] Installed height CF Card Retainer Clip 3M Part 3505-34 ( Order Separately - See note ) 2X 4.6 [ .18 ] 38.9 [ 1.53 ] 18.0 [ .71 ] 47.0 Ref [ 1.85 ] 34.8 [ 1.37 ] Material: 1.0mm Dia, Type 302 Stainless Steel wire per ASTM A-313 6.38 [ .251 ] 2X 7.16 [ .282 ] 2X 4.42 [ .174 ] Important Notice All statements, technical information, and recommendations related to 3M's products are based on information believed to be reliable, but the accuracy or completeness is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such use. Any statements related to the product which are not contained in 3M's current publications, or any contrary statements contained on your purchase order shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M. Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated above, your exclusive remedy shall be, at 3M's option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted. 3 3M Electronics Solutions Division 6801 River Place Blvd. Austin, TX 78726-9000 U.S.A. 1-800-225-5373 www.3Mconnectors.com Please recycle. Printed in USA. (c) 3M 2014. All rights reserved. RIA-2217B-E 3M is a trademark of 3M Company.