0.5mm FHY CONNECTOR Emboss Tape 0.5mm pitch/Connectors for FPC Specifications ------------------- * Current rating: 0.5 A AC, DC * Voltage rating: 50 V AC, DC * Temperature range: -25C to +85C (including temperature rise in applying electrical current) * Contact resistance: Initial value/ 60 m max. After environmental tests/ 60 m max. (variation from initial value) * Insulation resistance: 500 M min. * Withstanding voltage: 200 VAC/minute * Applicable FPC: Conductor pitch/ 0.5 mm Conductor width/ 0.35 mm Mating part thickness/ 0.3 0.03 mm The connector for the 0.3 mm thickness FPC with a mounting height of 1.3 mm. FPC with protrusion prevents incomplete insertion and mis-insertion, so that it provides reliable connection. * Refer to "General Instruction and Notice when using Terminals and Connectors" at the end of this catalog. * Contact JST for details. * Compliant with RoHS. * A FPC with protrusion improves operability and reliability * Reliable cover * Self-lock mechanism enables the cover to close by one-touch operation Standards ---------------------- 0 Recognized E60389 PC board layout and Assembly layout 0.30.05 0.45 0.80.05 0.5N-10.05 0.50.05 0.3 1.50.1 1.3 1.90.1 4 0.60.05 1.40.05 Connector outline Note: 1. The above figure is the figure viewed from the connector mounting side. 2. Tolerances are non-cumulative: 0.05 mm for all centers. The dimensions above should serve as a guideline. Contact JST for details. 3. N --- Number of circuits 1 FHY CONNECTOR Connector Circuits Dimensions (mm) Model No. A 4 C Q'ty/ reel 10 10FHY-RSM1-GAN-TF 4.5 8.0 8.7 3,000 18 18FHY-RSM1-GAN-TF 8.5 12.0 12.7 3,000 28 28FHY-RSM1-GAN-TF 13.5 17.0 17.7 3,000 30 30FHY-RSM1-GAN-TF 14.5 18.0 18.7 3,000 35 35FHY-RSM1-GAN-TF 17.0 20.5 21.2 3,000 40 40FHY-RSM1-GAN-TF 19.5 23.0 23.7 3,000 50 50FHY-RSM1-GAN-TF 24.5 28.0 28.7 3,000 60 60FHY-RSM1-GAN-TF 29.5 33.0 33.7 3,000 Material and Finish 1.3 C B Contact: Copper alloy, nickel-undercoated, gold-plated (nickel-stripe) Housing: Heat resisting resin, UL94V-0, natural Solder tab: Copper alloy, copper-undercoated, tin-plated (reflow treatment) Cover: Heat resisting resin, UL94V-0, black 0.5 A B RoHS compliance This product displays (LF)(SN) on a label. Note: 1. The products listed above are supplied on embossed-tape. 2. Contact JST for tin-plated products. Lead section dimensions of FPC 0.5N11.40.05 0.5N10.05 0.5N10.05 0.5N1-0.20.05 0.5N-10.03 0.5N-10.03 0.35 0.50.07 0.50.03 0.30.03 0.30.03 4.2min 4.2min 0.50.03 0.03 1.540.1 2.640.1 3.5min 0.350.03 0.50.07 3.5min 0.50.07 0.50.07 Reinforcing layer Reinforcing layer R0.2 Note: N --- Number of circuits 2