8ST Series
Applications
High density connectors for all military
and aeronautical purposes
Description
•
A high density connector from 1 to 128
contacts
• Sizes 22D, 20, 16, 12, # 16 coax and
# 8 triax
• Bayonet locking system
• MIL-C 38999 Series I contact layouts
• 100% scoop proof
• EMI/RFI shielding and shell-to-shell
continuity
Climatic
• Temperature range : -65°C to +175°C
• Sealing : mated connectors
differential pressure 2 bars leakage ≤ 16 cm3/hr
• Salt spray to method :
- MIL-STD 1344 method 1001
- VG 95 210, part 2 (48 hours)
- DIN IEC 68, part 2.11
Resistance to fluids
To MIL-C 38999 :
MIL-L 7808 ; MIL-L 23699 ; MIL-H 5606 ;
MIL-A 8243 ; MIL-C 25769 ; MIL-T 5624
(JP5) - hydraulic fluids
Electrical
Standards
JN 1003
VG 96912 - pr EN 3372
EFA J 62-017
Characteristics
Mechanical
• Shell : aluminum alloy
• Plating : olive green cadmium or nickel
• Insulator : thermoplastic
• Grommet and seal : silicone elastomer
• Contact : copper alloy
• Plating : gold over nickel
• Endurance :
500 mating/unmating operations
• Shock :
300 g during 3 ms and MIL-S 901 grade A
• Vibration : 147 m/s2, 10 to 2000 Hz
• Contact retention (mini force in N) :
size 22 D : 45 N size 20 : 60 N
size 16 : 100 N size 12 : 100 N
size 8 : 110 N
Ordering information
Souriau part numbers
• Test voltage (Vrms)
• Contact resistance :
resistance of wire included in measurement :
size 22D : 14.6 mΩ size 16 : 3.8 mΩ
size 20 : 7.3 mΩ size 12 : 1.7 mΩ
• Insulation resistance :
≥ 5000 MΩ (at 500 Vdc)
• Contact rating :
size 22D : 5 A size 16 : 13 A
size 20 : 7.5 A size 12 : 23 A
• Shell continuity :
- nickel/cadmium olive green : ≤ 2
.
5 mΩ
- nickel plating : ≤ 1 mΩ
• Shielding :
70 dB at 0
.
01 to 100 MHz
• Triaxial contact :
# 8
- Bandwidth : 0 - 20 MHz
- Voltage rating : 500 Vac maxi.
125 Vac at 21000 m
- Voltage drop :
inner and middle contact ≤ 55 mV under 1A
outer contact ≤ 75 mV under 12 A
Service sea level at 21000 m
M 1300 800
I 1800 1000
II 2300 1000
specification : 034 to be in accordance with JN1003 correspondance (with B type plating only)
orientation N-A-B-C-D
contact type P - pin (500 mating/unmating) A - connectors supplied without pin contacts
S - socket (500 mating/unmating) B - connectors supplied without socket contacts
H - pin (1500 mating/unmating)
J - socket (1500 mating/unmating)
contact layout - see table p 76 to 79
plating G - olive green cadmium B - Olive green cadmium (500h salt spray for spec. 034)
F - nickel Z - Black zinc nickel
shell size 08-10-12-14-16-18-20-22-24
type - - connectors with standard crimp contacts
M - for receptacles with medium spill contacts
C - for receptacles with short spill contacts
L - for receptacles with long spill contacts
style 0 - square flange receptacle
1 - in line receptacle
2 - square flange receptacle, not accepting backshells
5 - plug with RFI/EMI shielding
6 - plug without RFI/EMI shielding
7 - jam nut receptacle (for single hole mounting)
basic series 8ST 5 - 10 G 35 P N **
164
8ST Series
Shell style Souriau P/N JN 1003 VG 96 912
PAN 6433-2 part numbers
specifications: no suffix : no contact supplied (for crimp version)
1 : supplied with contact (for crimp version)
101 : short & gold spill contacts
102 : medium gold spill contacts
103 : long gold spill contacts
orientation N-A-B-C-D
contact type P - pin
S - socket
contact layout - see table p 76 to 79
shell size 08 to 24
shell type A - jam nut receptacle
B - square flange receptacle
FG - plug with RFI/EMI shielding
H - square flange receptacle, not accepting backshells
basic series JN 1003 B 14- 35 P N 1**
VG 96 912 part numbers
polarization N-A-B-C-D - see table p 113
type of contact P - pin
S - socket
contact layout - see table p 76 to 79
finish - drab olive cadmium only
shell size 08-10-12-14-16-18-20-22-24
shell type A - square flange receptacle (for front or rear mounting)
D - plug with RFI/EMI shielding
E - plug without RFI/EMI shielding
B - jam nut receptacle (for single hole mounting)
basic series VG 96 912 D 10 - 35 P N
Plug 8ST6••G••P/Sx - VG96912E••••P/SN -
Plug RFI/EMI 8ST5••G••P/SX JN1003FG••••P/S VG96912D••••P/SN EN3372W6••N••MFx
Square flange receptacle 8ST0••G••P/Sx JN1003B••••P/S VG96912A••••P/SN EN3372W0••N••MFx
Jam nut receptacle 8ST7••G••P/Sx JN1003A••••P/S VG96912B••••P/SN EN3372W7••N••MFx
Cable connecting receptacle 8ST1••G••P/Sx - - -
Straight endbell Cable clamp 8ST2••G••P/Sx JN1003H••••P/S - -
Endbell for Shielding braids 8LST••••G52 - VG96912G1 Separate
VG96912L - VG96912L•• EN-Norm
Cross reference list
*Note : please consult us. Our product will be evaluated against the final drafts/standards when available.
EN 3272
8ST 5 - 10 G 35 P N **
165
8ST Series
Shell styles Souriau P/N VG 96 912 EN 3372 *
Pin contact
Crimp # 22D 8599-0702 VG96912-P-22D Separate
# 20 8599-0703 VG96912-P-20 EN-Norm
# 16 8599-0704 VG96912-P-16
# 12 8599-0705 VG96912-P-12
Socket contact
Crimp # 22D 8599-0706 VG96912-S-22D Separate
# 20 8599-0707 VG96912-S-20 EN-Norm
# 16 8599-0708 VG96912-S-16
# 12 8599-0709 VG96912-S-12
Filler plug
# 22D 8660-212 DIN65194-22D Separate
# 20 8522-389A DIN65194-20 EN-Norm
# 16 8522-390A DIN65194-16
# 12 8522-391A DIN65194-12
Cross reference list
*Note : please consult us. Our product will be evaluated against the final drafts/standards when available.
Shell styles
8LST G52 8ST 6
8 ST 0
8 ST 7
8 ST 1
8500
8 ST 5
VG 96912L
SN-HE 308
SN-HE 308
VG 969 12 L
8LST G 52
166
8ST Series
167
shell size
Contacts with straight spill
22 D Short spill male 8599-0779 900 12.82-14 14.81-15.80 0.65 -
22 D Short spill female 8599-0788 900 12.82-14 14.81-15.80 0.65 -
22 D Medium spill male 8599-0728 900 15.09-16.28 13.88-14.87 0.65 -
20 Short spill male 8599-0780 900 14.09-15.28 14.81-15.80 0.65 -
20 Short spill female 8599-0789 900 14.09-15.28 14.81-15.80 0.65 -
20 Medium spill male 8599-0786 900 - 14.88-14.87 0.65 -
16 Short spill male 8599-7711 900 14.09-15.28 14.81-15.80 1.15 -
16 Short spill female 8599-7710 900 14.09-15.28 14.81-15.80 1.15 -
22 D Short spill male 8599-0730 900 17.80-19.03 14.10-15.09 0.70 -
22 D Short spill female 8599-0731 900 17.80-19.03 13.77-15.09 0.70 -
22 D Long spill male 8599-0720 900 22.30-23.53 14.10-15.09 0.70 -
22 D Long spill female 8599-0721 900 22.30-23.53 13.77-15.80 0.70 -
20 Short spill male 8599-0724 900 19.07-20.30 14.27-15.26 0.70 -
20 Short spill female 8599-0725 900 19.07-20.30 14.27-15.26 0.70 -
16 Short spill male 8599-0726 900 19.07-20.30 14.27-15.26 1.15 -
16 Short spill female 8599-0727 900 19.07-20.30 14.27-15.26 1.15 -
shell
style
contact
size D1L2 min. max.L1contact - type contact - P/N
8ST7
8STO
Note : please ask for separate installation instructions with contact co-ordinates.
shell size
Polarization
08 95 ° 77 ° - - 113 °
10 95 ° 81 ° 67 ° 123 ° 109 °
12 95 ° 75 ° 63 ° 127 ° 116 °
14 95 ° 74 ° 61 ° 129 ° 116 °
16 95 ° 77 ° 65 ° 125 ° 113 °
18 95 ° 77 ° 65 ° 125 ° 113 °
20 95 ° 77 ° 65 ° 125 ° 113 °
22 95 ° 80 ° 69 ° 121 ° 110 °
24 95 ° 80 ° 69 ° 121 ° 110 °
shell size N A B C D
viewed from face of plug
Detail A: - Dimensions for triaxial contacts only,
please consult us !
shell size
08 32.00 18.99 7/16-28
1.26 .748
10 32.00 21.99 9/26-24
1.26 .866
12 32.00 25.99 11 /16-24
1.26 1.023
14 32.00 29 13/16-20
1.26 1.14
16 32.00 32.99 15/16-20
1.26 1.299
18 32.00 35.99 1’’ 1/16-18
1.26 1.417
20 32.00 38.99 1’’ ’3/16-18
1.26 1.535
22 32.00 44 1’’ 5/16-18
1.26 1.73
24 32.00 46 1’’ 7/16-18
1.26 1.81
shell size L1 d1 thread J
UNEF 2A
Dimensions :
plugs type 5 and type 6
note : this internal detail only
applies to plug type 5
(version with grounding fingers)
0,1
0
0,1
0
0,1
0
0,1
0
0,1
0
0,05
0
0,05
0
0,05
0
0,05
0
0,05
0
0,05
0
0,05
0
0,05
0
0,05
0
0,05
0
0,1
Type 0
Square flange receptacle
Type 7
Jam nut receptacle
8ST Series
- This receptacle may be ordered with straight spill contacts
- Please ask for separate catalogue with installation instructions.
Detail A: - Dimensions for triaxial contacts only, please consult us!
shell size
08 16.05 12.25 2.30 12.04 21.00 3.05 15.10 7/16-28
.632 .482 .091 .474 .827 .120 .594
10 16.05 12.25 2.30 15.02 24.20 3.05 18.30 9/16-24
.632 .482 .091 .591 .953 .120 .720
12 16.05 12.25 2.30 19.08 26.60 3.05 20.60 11 /16-24
.632 .482 .091 .751 1.047 .120 .811
14 16.05 12.25 2.30 22.26 29.00 3.05 23.00 13/16-20
.632 .482 .091 .876 1.142 .120 .906
16 16.05 12.25 2.30 25.43 31.40 3.05 24.60 15/16-20
.632 .482 .091 1.001 1.236 .120 .969
18 16.05 12.25 2.30 28.61 33.70 3.05 27.00 1’’ 1 /16-18
.632 .482 .091 1.126 1.327 .120 1.063
20 15.29 12.25 3.06 31.78 36.90 3.05 29.40 1’’ 3/16-18
.602 .482 .120 1.251 1.453 .120 1.157
22 15.29 12.25 3.06 34.96 40.10 3.05 31.80 1’’ 5/16-18
.602 .482 .120 1.376 1.579 .120 1.252
24 15.29 12.25 3.06 38.13 43.30 3.73 34.90 1’’ 7/16-18
.602 .482 .120 1.501 1.705 .147 1.374
shell
size L1 L2 L3 d1 b1 d2 e1 8ST standard and Spec. 034
Thread J UNEF 2A
Square flange receptacle type 0
- This receptacle may be ordered with straight spill contacts
- Please ask for separate catalogue with installation instruc-
tions.
Detail A: - Dimensions for triaxial contacts only, please consult us!
shell size
08 23.36 9.86 2.86 12.04 27.30 24.10 9/16-24 7/16-28
.920 .388 .113 .474 1.075 .949
10 23.36 9.86 2.86 15.02 30.50 27.30 11 /16-24 9/16-24
.920 .388 .113 .591 1.201 1.075
12 23.36 9.86 2.86 19.08 35.30 32.10 13/16-20 11 /16-24
.920 .388 .113 .751 1.39 1.264
14 23.36 9.86 2.86 22.26 38.40 35.20 15/16-20 13/16-20
.920 .388 .113 .876 1.512 1.386
16 23.36 9.86 2.86 25.43 41.60 38.40 1’’ 1/16-18 15/16-20
.920 .388 .113 1.001 1.638 1.512
18 23.36 9.86 3.66 28.61 44.80 41.60 1’’ 3/16-18 1’’ 1 /16-18
.920 .388 .144 1.126 1.764 1.638
20 23.36 9.86 3.66 31.78 49.60 46.30 1’’ 5/16-18 1’’ 3/16-18
.920 .388 .144 1.251 1.953 1.823
22 23.36 9.86 3.66 34.96 52.70 49.50 1’’ 7/16-18 1’’ 5/16-18
.920 .388 .144 1.376 2.075 1.949
24 23.36 9.86 3.66 38.13 55.90 52.70 1’’ 7/16-18 1’’ 7/16-18
.920 .388 .144 1.501 2.200 2.075
shell
size L1 L2 L3 d1 d2 b thread J
UNEF 2A
Jam nut receptacle type 7
Detail A: - Dimensions for triaxial contacts only, please consult us!
shell size
08 16.05 12.25 2.30 12.04 14.63 18.05 7/16-24
.632 .482 .091 .474 .576 .711
10 16.05 12.25 2.30 15.02 18.93 22.35 9/16-24
.632 .482 .091 .591 .745 .880
12 16.05 12.25 2.30 19.08 22.23 25.65 11 /16-24
.632 .482 .091 .751 .875 1.010
14 16.05 12.25 2.30 22.26 25.63 29.05 13/16-20
.632 .482 .091 .876 1.009 1.144
16 16.05 12.25 2.30 25.43 27.83 31.25 15/16-20
.632 .482 .091 1.001 1.096 1.230
18 16.05 12.25 2.30 28.61 31.36 34.65 1’’ 1/16-18
.632 .482 .091 1.126 1.235 1.364
20 15.29 12.25 3.06 31.78 34.63 38.05 1’’ 3/16-18
.602 .482 .120 1.251 1.363 1.498
22 15.29 12.25 3.06 34.96 38.03 41.45 1’’ 5/16-18
.602 .482 .120 1.376 1.497 1.632
24 15.29 13.65 3.06 38.13 42.03 45.45 1’’ 7/16-18
.602 .537 .120 1.501 1.655 1.789
shell
size
L1
Max
L2
Max
L3
Max
D1
Max
B1
Max
D2
Max
UNEF 2A
thread J
Cable connecting receptacle type 1
2.5 Max
.098
3.2 Max
.126
2.5 Max
/.098
(1.2 Max .047 # 24 only)
D2
A
Thread J
B1
L1
ØD1
L2
L3
L1
Ød1
L3
L2
e1
b1
Thread J
4 holes Ø d2 Detail A
Detail A
Detail A
L1
L3
Ød1
b
L2
Ød2
Thread J
Detail A
168
N1003 Spec. 034
Thread J UNEF 2A
8ST Series
169
shell
size reference thread J
UNEF-2B
E
min
L
Max
E
Max
D
nom. B
08 43.00 11.97 20.20 2.54 20.97 15.10 3.24
1.693 .471 .795 .100 .826 .594 .128
10 43.00 14.94 20.20 2.54 24.18 18.26 3.24
1.693 .588 .795 .100 .952 .719 .128
12 43.00 19.01 20.20 2.54 26.56 20.62 3.24
1.693 .748 .795 .100 1.046 .812 .128
14 43.00 22.18 20.20 2.54 28.95 23.01 3.24
1.693 .873 .795 .100 1.140 .906 .128
16 43.00 25.36 20.20 2.54 31.31 24.61 3.24
1.693 .998 .795 .100 1.233 .969 .128
18 45.00 28.53 20.80 3.30 33.67 26.97 3.24
1.772 1.123 .819 .130 1.326 1.062 .128
20 45.00 31.74 20.80 3.30 36.87 29.36 3.24
1.772 1.250 .819 .130 1.452 1.156 .128
22 45.00 34.88 20.80 3.30 40.05 31.75 3.24
1.772 1.373 .819 .130 1.577 1.250 .128
24 45.00 38.06 20.80 3.30 43.22 34.93 3.87
1.772 1.498 .819 .130 1.702 1.375 .152
shell
size
A
Max
B
Max
C
Max
D
Max
E
Max
F G
Max
Backshells
08 7/16-28 1.58 14.70 3.18 19.20 15.70
.062 .579 .125 .756 .618
10 8LST 102 B52 9/16-24 1.58 15.50 4.78 19.20 18.60
.062 .610 .188 .756 .732
12 8LST 103 B52 11/16-24 3.18 17.10 6.35 23.90 21.80
.125 .673 .250 .941 .858
14 8LST 104 B52 13/16-20 6.35 23.30 9.53 25.90 25.00
.250 .917 .375 1.020 .984
16 8LST 105 B52 15/16-20 6.35 26.80 12.70 28.70 28.20
.250 1.055 .500 1.130 1.110
18 8LST 106 B52 1’’ 1/16-18 9.53 26.80 15.88 30.30 30.40
.375 1.055 .625 1.193 1.197
20 8LST 107 B52 1’’ 3/16-18 12.70 26.80 19.05 33.50 33.60
.500 1.055 .750 1.319 1.323
22 8LST 108 B52 1’’ 5/16-18 15.88 26.80 22.23 36.50 36.80
.625 1.055 .875 1.437 1.449
24 8LST 109 B52 1’’ 7/16-18 15.88 26.80 25.40 39.80 40.00
.625 1.055 1.000 1.567 1.575
Backshell with cable clamp
shell
size
reference
(cadmium olive)
thread J
UNEF-2B
L1
Max L2 d4 d5 d6 d7 P L3
Max
08 VG96912 L 08 7/16-18 24.80 34.00 12.00 18.20 6.20 14.50 16.00 10.50
.976 1.339 .472 .717 .244 .571 .630 .413
10 VG96912 L 10 9/16-24 25.80 35.00 14.00 21.20 7.00 16.50 19.00 10.50
1.016 1.378 .551 .835 .276 .650 .748 .413
12 VG96912 L 12 11/16-24 25.80 35.00 16.00 24.20 9.50 18.50 22.00 10.50
1.016 1.378 .630 .953 .374 .728 .866 .413
14 VG96912 L 14 13/16-20 25.80 35.00 20.00 27.20 12.50 22.50 25.00 10.50
1.016 1.378 .787 1.071 .492 .886 .984 .413
16 VG96912 L 16 15/16-20 26.80 36.00 23.00 30.20 15.50 25.50 28.00 10.50
1.055 1.417 .906 1.189 .610 1.004 1.102 .413
18 VG96912 L 18 1’’ 1/16-18 26.80 36.00 24.50 34.20 18.50 28.50 32.00 10.50
1.055 1.417 .965 1.346 .728 1.122 1.260 .413
20 VG96912 L 20 1’’ 3/16-18 26.80 36.00 28.50 38.20 21.50 32.50 36.00 10.50
1.055 1.417 1.122 1.504 .846 1.280 1.417 .413
22 VG96912 L22 1’’ 5/16-18 26.80 36.00 30.50 40.20 23.50 34.50 41.00 10.50
1.055 1.417 1.201 1.583 .925 1.358 1.614 .413
24 VG96912 L24 1’’ 7/16-18 26.80 36.00 34.50 45.20 27.50 38.50 43.00 10.50
1.055 1.417 1.358 1.780 1.083 1.516 1.693 .413
Backshell for shielded cables and heatshrink boot
polarization N - normalcontact type male / femalecontact layout please consult us
plating G - olive green cadmium
shell size 08 to 24
Through-bulkhead receptacle
Part numbers
basic series
SN1863 22 G •• PS N
5 Max 5 Max
DE E
F
4 holes Ø G
Ø B
A
p
L3
Ø d1
Ø d6
Ø d5
Ø j
L4
L2
tread J
Ø d4
170
8ST Series
cap with chain and ring D 44 D 8 ST 0
cap with nylon cord and ring B 44 B 8 ST 0
cap with nylon cord and washer H - 8 ST 7
cap with chain and washer J - 8 ST 7
type protective cap
Protective caps for receptacles styles 0, 1 and 7
Accessories
shell
size part number A
Max
B
Max C D J
Max H K
08 8500 02 . . .* 19.00 21.44 84.00 77.00 14.80 80.00 84.00
.748 .844 3.307 3.031 .583 3.150 3.307
10 8500 03 . . .* 21.80 21.44 84.00 77.00 17.90 80.00 84.00
.858 .844 3.307 3.031 .705 3.150 3.307
12 8500 04 . . .* 26.10 21.44 100.00 89.00 22.70 90.00 100.00
1.028 .844 3.937 3.504 .894 3.543 3.937
14 8500 05 . . .* 29.30 21.44 100.00 89.00 25.90 90.00 100.00
1.154 .844 3.937 3.504 1.020 3.543 3.937
16 8500 27 . . .* 32.50 21.44 100.00 89.00 29.00 90.00 100.00
1.280 .844 3.937 3.504 1.142 3.543 3.937
18 8500 06 . . .* 35.30 21.44 100.00 89.00 32.30 90.00 100.00
1.390 .844 3.937 3.504 1.272 3.543 3.937
20 8500 07 . . .* 38.80 21.44 116.00 102.00 35.40 110.00 116.00
1.528 .844 4.567 4.016 1.394 4.331 4.567
22 8500 08 . . .* 42.00 21.44 116.00 102.00 38.60 110.00 116.00
1.654 .844 4.567 4.016 1.520 4.331 4.567
24 8500 09 . . .* 45.10 22.22 116.00 102.00 41.70 110.00 116.00
1.776 .875 4.567 4.016 1.642 4.331 4.567
olive nickel for recept.
style
* specifications for caps style and plating see table.
Ø 3.50
.138
8500--D
8500--H
8500--J
8500--B
Ø 3.50
.138
8ST Series
171
0-Ring for receptacle
type 7
08 8525-1431 AS3582-017
10 8525-1432 AS3582-019
12 8525-1433 AS3582-022
14 8525-1434 AS3582-024
16 8525-1435 AS3582-026
18 8525-1436 AS3582-028
20 8525-1437 AS3582-128
22 8525-1438 AS3582-130
24 8525-1439 AS3582-132
shell
size
Gasket for receptacle
type 0
Plastic protective cap
Accessories
shell
size
Dimension A
caps for caps for
receptacles plugs
Part number
caps for caps for
receptacles plugs
08 15.40 19.72 85005585A 70777
.606 .776
10 18.30 19.72 85005586A MS9037612
.720 .776
12 22.63 85005587A MS9037616Y
.891 -
14 25.80 30.80 85005588A 8500-5600
1.016 1.210
16 29.20 35.90 85005589A 8500-5601
1.150 1.413
18 32.40 37.00 85005590A 8500-5602
1.276 1.46
20 35.60 39.00 85005591A 8500-5592A
1.402 1.54
22 39.00 42.200 85005592A 8500-5593A
1.535 1.661
24 42.20 44.50 85005593A 70472
1.661 1.752
Dummy receptacle
Gaskets
shell
size Part number B1 E1 J D1 L1 L2
Max
08 8ST0.08GUR 20.73 15.10 3.14 11.97 16.05 18.19
.816 .594 .124 .471 .632 .716
10 8ST0.10GUR 23.94 18.26 3.14 14.94 16.05 18.19
.943 .719 .124 .588 .632 .716
12 8ST0.12GUR 26.32 20.62 3.14 19.01 16.05 18.19
1.036 .812 .124 .748 .632 .716
14 8ST0.14GUR 28.71 23.01 3.14 22.18 16.05 18.19
1.130 .906 .124 .873 .632 .716
16 8ST0.16GUR 31.07 24.61 3.14 25.36 16.05 18.19
1.223 .969 .124 .998 .632 .716
18 8ST0.18GUR 33.43 26.98 3.14 28.53 16.05 18.19
1.316 1.062 .124 1.123 .632 .716
20 8ST0.20GUR 36.63 29.38 3.14 31.71 15.29 18.19
1.442 1.157 .124 1.248 .602 .716
22 8ST0.22GUR 39.81 31.77 3.14 34.88 15.29 18.19
1.567 1.251 .124 1.373 .602 .716
24 8ST0.24GUR 42.98 34.92 3.14 38.06 15.29 18.19
1.692 1.375 .124 1.498 .602 .716
Notes : - gaskets correspond to the temperature resistance of Serie 8 ST
(max. 175 °C)
- for use up to 125 °C we offer gaskets in accordance with VG 95 328
e.g. : VG 95 328 T 07 A… = non conductive
VG 95 328 T 07 B… = conductive (for HF application)
Ø A
D
L1
L2 B1
E1
ØJ
172
8ST Series
Panel cut-out
shell
size back panel front panel
mounting mounting
dH13
e
H13
d1
H13
e1
H13
08 14.00 12.70 15.10 14.50 13.60
.551 .500 .594 .571 .535
10 17.00 16.00 18.30 17.70 16.80
.669 .630 .720 .697 .661
12 22.00 19.00 20.60 22.70 20.90
.866 .748 .811 .894 .823
14 25.00 22.20 23.00 25.70 24.10
.984 .874 .906 1.012 .949
16 28.00 25.50 24.60 28.80 27.20
1.102 1.004 .969 1.134 1.071
18 31.00 28.50 27.00 32.00 30.40
1.220 1.122 1.063 1.260 1.197
20 34.50 31.70 29.40 35.10 33.60
1.358 1.248 1.157 1.382 1.323
22 37.50 35.00 31.80 38.00 36.80
1.476 1.378 1.252 1.496 1.449
24 41.00 38.00 34.90 41.50 39.90
1.614 1.496 1.374 1.634 1.571
8ST0… 8ST 7…
8 ST 0 style
8 ST 7 style
Panel cut-out
Panel cut-out
shell sizes 8 to 22 : Ø3.3 ± 0.13
shell sizes 24 : Ø3.88 ± 0.13
8525 Series
specification - connector supplied without backshell, without specification
L- connector supplied without contact
008 - connector supplied with special contacts # 20 for 0.38 to 0.93 mm2cable or # 16 for 0.93 to 1.91 mm2cable
068 - mixed contact layouts (# 20 and # 16)
connector supplied with special contacts # 20 for 0.38 to 0.93 mm2cable, and standard contacts # 16
009 - receptacle 10 or 17 with straight spills contacts size 20 - Ø 0.60 mm - size 16 - Ø 1.00 mm - length max 7.30 mm
connector supplied with backshells
001 - backnut 007 - backshell for heatshrink sleeving
002 - straight cable clamp 057 - backnut for heatshrink sleeving
003 - elbow cable clamp 012 - straight cable clamp*
011 - backnut* 017 - backshell for heatshrink sleeving*
013 - elbow cable clamp* 018 - backshell for solder shield termination*
obligatory suffix H- 3 rear teeth at 120 degrees
K- rear teeth over 360 degrees
orientation N- normal
W, X, Y, Z - see table p 46
contact type P- male contact
S- female contact
contact layout - see table p 45
plating R- black anodized (non conductive plating)
N- nickel (conductive plating)
G- yellow cadmium (conductive plating)
shell type 10 - square flange receptacle
17 - jam nut receptacle
16 - plug
36 - RFI shielded plug
Applications
For all general purposes in civil aero-
nautical applications
Description
• Light weight version of MIL-C 26482 Series II
• Intermateable and interchangeable with
MIL-C 26482 Series I and II
• Environmental stainless steel version on
request
• RFI shielding plug
• Gold plating crimp contacts # 20, # 16, # 12
• Minicoax contacts # 16
• Hermetic version available
Climatic
• Operating temperatures :
-55°C to +200°C (class R and N)
-55°C to +175°C (class G)
• Damp heat :
56 days
• Salt spray :
48 hours
• Leakage :
environmental version
- low pressure immersion : 33 mbar
hermetic version
- differential pressure of 1 bar air/helium,
leakage is ≤2,8 mm3/ hr
Electrical
Standards
NFC 93422 - HE 302
NFL 54130 - NAS 1599
GAM T1 list
LN 29504
Characteristics
Mechanical
• Endurance :
- plug type 16 : 500 operations
- plug type 36 : 250 operations
• Shock : as per NFC 93422 - HE 302
• Vibrations :
from 10 to 2000 Hz - acceleration : 20 G
• Contact retention in insert :
- size 20 : 90 N size 16 : 115 N
- size 12 : 136 N
basic series 8525 - 10 R 18 B 32 P N H •••
Ordering information sealed connectors aluminum version
environmental class hermetic class
size 20 7,5 A 5 A
size 16 13 A 10 A
size 12 23 A 17 A
• Max current rating per contact :
environmental class hermetic class
size 20 ≤1 mΩ≤7 mΩ
size 16 ≤0.55 mΩ≤3.8 mΩ
size 12 ≤0.35 mΩ≤2.4 mΩ
• Contact resistance :
Service I II
at ground 1500 Vrms 2300 Vrms
at 21000 m 375 Vrms 550 Vrms
• Insulation resistance :
≥5000 MΩat 500 Vdc
• Dielectric withstanding voltage 2 classes :
services I and II
• Shell continuity with plug type 36 :
- environmental receptacle ≤5 mΩ
- hermetic receptacle ≤50 mΩ
• Resistance to fluids :
- fuel : Air 3405
- hydraulic fluid : Oronite M2V
- lubricant : Air 3517
*Connector supplied with special contacts (large barrel)
42
43
8525 Series
Hermetic connectors
shell size 08-10-12-14-16-18-20-22-24
plating A- black anodized
R- black anodized with blue anodized backshell nut
N- nickel
J- yellow cadmium
backshell type
01 - backnut
02 - straight cable clamp
03 - elbow cable clamp
17 - backshell for heatshrink sleeving
57 - backnut for heatshrink sleeving
18 - backshell for solder shield termination
basic series 852 - 01 A 18
Backshells aluminum version
specification A- obligatory suffix for backshell type 02 only
shell size 08-10-12-14-16-18-20-22-24
backshell type
01 - backnut
02 - straight cable clamp
basic series 8527 - 01 14 •
Backshells stainless steel version
specification 002 - large flange 02 H version
obligatory suffix
orientation N- normal
W, X, Y, Z - see table p 46
contact type P- male contact only
contact layout - see table p 45
hermetic version H- stainless steel
shell type
I- solder fixing receptacle
02 - square flange receptacle
07 - jam nut receptacle
basic series 8525 - IH 18 B 32 P N H •••
44
8525 Series
ALUMINIUM VERSION / DESIGNATION FCI SOURIAU ASN-E NSA NFC 93422 - HE 302 ABS
square flange receptacle 8525-10 R
●●● ●●
H008* ASN-E 0053 R
●●● ●●
E NSA 938001 R
●●● ●●
8525-10 N
●●● ●●
H008* ASN-E 0053 N
●●● ●●
E
8525-10 R
●●● ●●
HL ASN-E 0053 R
●●● ●●
F NSA 938001 R
●●● ●●
C
8525-10 N
●●● ●●
HL ASN-E 0053 N
●●● ●●
F
8525-10 R
●●● ●●
H
●●●
HE 302-0R
●●-●●
1F
8525-10 N
●●● ●●
H
●●●
HE 302-0R
●●-●●
6F
jam nut receptacle 8525-17 R
●●● ●●
H008* ASN-E 0054 R
●●● ●●
E NSA 938002 R
●●● ●●
8525-17 N
●●● ●●
H008* ASN-E 0054 N
●●● ●●
E
8525-17 R
●●● ●●
HL ASN-E 0054 R
●●● ●●
F NSA 938002 R
●●● ●●
C
8525-17 N
●●● ●●
HL ASN-E 0054 N
●●● ●●
F
8525-17 R
●●● ●●
H
●●●
HE 302-7R
●●-●●
1F
8525-17 N
●●● ●●
H
●●●
HE 302-7R
●●-●●
6F
plug 8525-16 R
●●● ●●
H008* ASN-E 0052 R
●●● ●●
E NSA 938000 R
●●● ●●
8525-16 N
●●● ●●
H008*
8525-16 R
●●● ●●
HL ASN-E 0052 R
●●● ●●
F NSA 938000 R
●●● ●●
C
8525-16 N
●●● ●●
HL
8525-16 R
●●● ●●
H
●●●
HE 302-6R
●●-●●
1F
8525-16 N
●●● ●●
H
●●●
HE 302-6R
●●-●●
6F
RFI shielded plug 8525-36 N
●●● ●●
H008* ASN-E 0052 N
●●● ●●
E
8525-36 N
●●● ●●
HL ASN-E 0052 N
●●● ●●
F
8525-36 N
●●● ●●
H
●●●
HE 302-8R
●●-●●
6F
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
STAINLESS STEEL VERSION FCI SOURIAU ASN-E NSA NFC 93422 - HE 302 ABS
square flange receptacle 8525-10 K
●●● ●●
H008* ABS 0595 S
●●●●●
E
8525-10 K
●●● ●●
HL ABS 0595 S
●●●●●
F
jam nut receptacle 8525-17 K
●●● ●●
H008* ABS 0594 S
●●●●●
E
8525-17 K
●●● ●●
HL ABS 0594 S
●●●●●
F
RFI shielded plug 8525-36 K
●●● ●●
H008* ABS 0592 S
●●●●●
E
8525-36 K
●●● ●●
HL ABS 0592 S
●●●●●
F
square flange hermetic recep.
8525-02 H
●●● ●●
P H HE 302-2H
●●●●●
P 0F
jam nut hermetic receptacle 8525-07 H
●●● ●●
P H HE 302-7H
●●●●●
P 0F
solder mounting hermetic receptacle 8525- 1 H
●●● ●●
P H HE 302-1H
●●●●●
P 0F
ACCESSORIES
backnut 852-01 R
●●
ASN-E 0046-01
●●
B NSA 938 150 02
●●
HE 302-01R
●●●
B1
852-01 A
●●
ASN-E 0046-01
●●
N HE 302-01G
●●●
B6
straight cable clamp 852-02 R
●●
ASN-E 0047-01
●●
B NSA 938 150 03
●●
HE 302-02R
●●●
B1
852-02 A
●●
ASN-E 0047-01
●●
N HE 302-02G
●●●
B6
elbow cable clamp 852-03 R
●●
ASN-E 0047-02
●●
B NSA 938 150 01
●●
HE 302-03R
●●●
B1
852-03 A
●●
ASN-E 0047-02
●●
N HE 302-03G
●●●
B6
backshell for heatshrink sleeving 852-17 R
●●
HE 302-04R
●●●
B1
852-17 A
●●
HE 302-04G
●●●
B6
backshell for solder shield termination 852-18 R
●●
HE 302-05R
●●●
B1
852-18 A
●●
HE 302-05G
●●●
B6
thread protective nut 852-04 R
●●
ASN-E 0046-02
●●
B NSA 938 003
●●
852-04 A
●●
ASN-E 0046-02
●●
N
male contacts
8522-2349 A NSA 938 151 PA 2000
8526-1349 NSA 938 151 PA 1600
8526-1350 NSA 938 151 PA 1200
8526-1348
8522-6179 A NSA 938 151 PA 1601
female contacts 8520-292 NSA 938 152 SA 2000
8526-1346 NSA 938 152 SA 1600
8526-1347 NSA 938 152 SA 1200
8526-1344
8522-6180 A NSA 938 152 SA 1601
male thermocouple contacts 8522-875 NSA 938 152 PB 2000
8522-876 NSA 938 152 PC 2000
female thermocouple contacts 8522-877 NSA 938 152 SB 2000
8522-878 NSA 938 152 SC 2000
female mini coax. contacts 8522-1-001 NSA 938 171 PL 1600
8522-1-002
male mini coax. contacts 8522-2-001 NSA 938 172 SL 1600
8522-2-002
cap for receptacle 852 -
●●
-R
●●
NSA 938 005
●●
HE 302-B00
●●●
AF
cap for plug 852 -
●●
-R
●●
NSA 938 007
●●
HE 302-B16
●●●
AF
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
P
S
* 008 : for # 20 contact layouts - 068 : for mixed contact # 20 and # 16 - nothing : for # 16 or # 12 contact layouts
Cross reference list
45
8525 Series
Contact layouts
viewed from front face of male insulator
shells
8
8 B 3A*
10 B 6* 12 B 10* 14 B 19* 16 B 26* 18 B 32* 20 B 41* 22 B 55* 24 B 61*
3 # 20
6 # 20 10 # 20 19 # 20 26 # 20 32 # 20 41 # 20 55 # 20 61 # 20
8 B 33*
12 B 3*
SN 0394
14 B 15* 16 B 8* 18 B 11 20 B 39 * 22 B 41* 24 B 31
3 # 20
3 # 161 coax
14 # 20
1 # 16 8 # 16 11 # 16
37 # 20
2 # 16
27 # 20
14 # 16 31 # 16
14 B 12* 16 B 21 18 B 8* 20 B 16* 22 B 21* 24 B 19
8 # 20
4 # 16
16 # 20
5 # 16 8 # 12 16 # 16 21 # 16
14 B 5* 20 B 34SN 0468 22 B 12 SN 1229
SN 0797
5 # 16
14 B 4*
4 # 12
26 # 20
8 # 16
52 Ø 1
2 coax # 12
58 ∅1
1 coax 50 Ω
2 # 12
2 # 20 12 # 12
19 # 12
10 12 14 16 18 20 22 24
* hermetic receptacle available
Specials (SHTP)
46
8525 Series
Polarization
viewed from front face
of male insulator
(insulator rotated inside metal body)
shell
size
layouts
service I
1500 Vrms
service II
2300 Vrms
number of contacts
size 20 size 16 size 12
angles in degrees
NWX Y Z
08 8 B 3 A X 3 0 60 210 - -
8 B 33 X 3 0 90 - - -
10 10 B 6 X 6 0 90 - - -
12 12 B 10 X 10 0 60 155 270 295
12 B 3 X 3 0 140 220 180 -
14 B 19 X 19 0 30 165 315 -
14 B 15 X 14 1 0 17 110 155 234
14 14 B 12 X 8 4 0 43 90 - -
14 B 5 X 5 0 40 92 184 273
14 B 4 X 4 0 45 - - -
16 B 26 X 26 0 60 - 275 338
16 16 B 8 X 8 0 54 152 180 331
16 B 21 X 16 5 0 - - - -
18 B 32 X 32 0 85 138 222 265
18 18 B 11 X 11 0 62 119 241 340
18 B 8 X 8 0 180 - - -
20 B 41 X 41 0 45 126 225 -
20 20 B 39 X 37 2 0 63 144 252 333
20 B 16 X 16 0 238 318 333 347
20 B 34 X 26 8 0 - - - -
22 B 55 X 55 0 30 142 226 314
22 B 41 X 27 14 0 39 135 264 -
22 22 B 21 X 21 0 16 135 175 349
22 B 12 X 12 0 - - - -
24 B 61 X 61 0 90 180 270 324
24 24 B 31 X 31 0 90 225 255 -
24 B 19 X 19 0 30 165 315 -
Contacts
diameter 1 mm 1 mm 1,6 mm 1,6 mm 2,4 mm 2,4 mm
retention force 90 N 90 N 115 N 115 N 136 N 136 N
current rating 7,5 A 7,5 A 13 A 13 A 23 A 23 A
contact resistance ≤1 mΩ≤1 mΩ≤0,55 mΩ≤0,55 mΩ≤0,35 mΩ≤0,35 mΩ
Technical characteristics
external Ø over insulator 0,98 to 2,11 mm 0,98 to 2,11 mm 1,34 to 2,62 mm 1,34 to 2,62 mm 2,45 to 4,01 mm 0,98 to 2,11 mm
admissible section 0,21 to 0,60 mm20,38 to 0,93 mm20,60 to 1,34 mm20,60 to 1,91 mm21,91 to 3,18 mm20,38 to 0,93 mm2
wire gauge 24 to 20 22 to 18 20 to 16 18 to 14 14 to 12 22 to 18
reducing sleeve for wire of 0,09 to 0,21 mm2-----
Admissible wires
male contact 8526-1348 8522-2349 A 8526-1349 8522-6179 A 8526-1350 8526-5041
female contact 8526-1344 8520-292 8526-1346 8522-6180 A 8526-1347 8526-5591 A
colour code red-red red-violet blue-blue blue-orange yellow-yellow violet-yellow
male contact
thermocouple - chromel 8522-875 8522-3761 8522-881 - 8522-887 -
colour code yellow yellow yellow - yellow -
thermocouple - alumel 8522-876 8522-3760 8522-882 - 8522-888 -
colour code black (1 dot) black (2 dots) black (1 dot) - black (1 dot) -
female contact
thermocouple - chromel 8522-877 8522-3770 8522-883 - 8522-889 -
colour code yellow yellow yellow - yellow -
thermocouple - alumel 8522-878 8522-3771 8522-884 - 8522-890 -
colour code black black (2 dots) black (1 dot) - black (1 dot) -
reducing sleeve 8522-2142 - - - - -
Part numbers
male contacts 8522-2-001 8522-2-002
female contacts 8522-1-001 8522-1-002
RG 316 U KX 22 A
cables accepted -RG 174 U KX 3 A RG 178 B/U KX 21 A
RG 188 A/U RG 196 A/U
RG 179 B/U
Minicoax contacts
minicoax installed instead of size 16 contacts
contact size # 12 special# 12 standard# 16 special# 16 standard# 20 special# 20 standard
47
8525 Series
Dimensions
Plug type 16 and 36
Backshells
818.95 15.65 6.75 31.40 5.85 19.10 22.25 40.80 25.50
.746 .616 .266 1.236 .230 .752 .876 1.606 1.004
10 22.65 18.60 9.40 31.40 8.70 20.30 22.25 40.80 25.50
.892 .732 .370 1.236 .343 .799 .876 1.606 1.004
12 25.75 21.75 12.80 31.40 12.00 23.50 22.25 40.80 25.50
1.014 .856 .504 1.236 .472 .925 .876 1.606 1.004
14 29.75 24.95 14.75 31.40 16.75 25.50 27.45 46.00 25.50
1.171 .982 .581 1.236 .659 1.004 1.081 1.811 1.004
16 32.95 28.20 17.95 31.40 20.55 29.50 27.45 46.00 25.50
1.297 1.110 .707 1.236 .809 1.161 1.081 1.811 1.004
18 35.35 30.90 19.95 31.40 22.55 32.30 27.45 46.00 25.50
1.392 1.217 .785 1.236 .888 1.272 1.081 1.811 1.004
20 38.75 34.15 23.10 32.70 25.75 36.00 27.45 47.30 27.00
1.526 1.344 .909 1.287 1.014 1.417 1.081 1.862 1.063
22 41.85 37.25 26.30 32.70 28.95 39.00 27.45 47.30 27.00
1.648 1.467 1.035 1.287 1.140 1.535 1.081 1.862 1.063
24 45.05 40.45 29.20 32.70 32.05 42.70 27.45 47.30 27.00
1.774 1.593 1.150 1.287 1.262 1.681 1.081 1.862 1.063
shell
size
A
Max
B
Max CD
Max
E
Max
F
Max
G
Max
H
Max
L
Max
820.00 4.00 5.85 25.00 43.80 6.75 13.50 3.30 10.60 28.55
.787 .157 .230 .984 1.724 .266 .531 .130 .417 1.124
10 22.20 6.85 8.70 27.90 46.70 9.40 15.35 3.30 10.60 28.55
.874 .270 .343 1.098 1.839 .370 .604 .130 .417 1.124
12 24.00 10.15 12.00 31.20 50.00 12.80 19.65 3.30 10.60 28.55
.945 .400 .472 1.228 1.969 .504 .774 .130 .417 1.124
14 24.50 11.70 16.75 32.80 51.60 14.75 21.25 3.30 10.60 28.55
.965 .461 .659 1.291 2.031 .581 .837 .130 .417 1.124
16 27.00 15.50 20.55 36.50 55.30 17.93 24.45 3.30 10.60 28.55
1.063 .610 .809 1.437 2.177 .706 .963 .130 .417 1.124
18 28.60 17.50 22.55 38.50 57.30 19.94 26.45 3.30 10.60 28.55
1.126 .689 .888 1.516 2.256 .785 1.041 .130 .417 1.124
20 30.10 20.70 25.75 41.80 61.90 23.11 30.90 3.30 10.60 28.55
1.185 .815 1.014 1.646 2.437 .910 1.217 .130 .417 1.124
22 31.90 23.90 28.95 45.00 65.10 26.29 34.40 3.30 10.60 28.55
1.256 .941 1.140 1.772 2.563 1.035 1.354 .130 .417 1.124
24 33.40 27.00 32.05 48.00 68.10 29.20 36.65 3.30 10.60 28.55
1.315 1.063 1.262 1.890 2.681 1.150 1.443 .130 .417 1.124
shell
size
J
Max
K
min.
K
Max
L
Max
M
Max
N
min.
O
Max PQ
Max
R
Max
846.90 13.72 6.75 17.48 3.30 10.50 32.00 11.50 27.55 45.90 6.50
1.846 .540 .266 .688 .130 .413 1.260 .453 1.085 1.807 .256
10 46.90 13.72 9.40 20.40 3.30 10.50 32.00 15.00 27.55 45.90 8.50
1.846 .540 .370 .803 .130 .413 1.260 .591 1.085 1.807 .335
12 46.90 13.72 12.80 23.83 3.30 10.50 32.00 18.00 27.55 45.90 12.50
1.846 .540 .504 .938 .130 .413 1.260 .709 1.085 1.807 .492
14 46.90 13.72 14.75 27.00 3.30 10.50 32.00 21.00 31.55 49.90 13.50
1.846 .540 .581 1.063 .130 .413 1.260 .827 1.242 1.965 .531
16 46.90 13.72 17.93 31.45 3.30 10.50 32.00 24.00 31.55 49.90 17.50
1.846 .540 .706 1.238 .130 .413 1.260 .945 1.242 1.965 .689
18 46.90 13.72 19.94 33.27 3.30 10.50 32.00 25.50 31.55 49.90 19.50
1.846 .540 .785 1.310 .130 .413 1.260 1.004 1.242 1.965 .768
20 48.20 13.72 23.11 36.47 3.30 10.50 33.30 28.50 35.55 55.20 23.00
1.898 .540 .910 1.436 .130 .413 1.311 1.122 1.400 2.173 .906
22 48.20 13.72 26.29 39.62 3.30 10.50 33.30 32.00 35.55 55.20 23.00
1.898 .540 1.035 1.560 .130 .413 1.311 1.260 1.400 2.173 .906
24 48.20 13.72 29.20 42.82 3.30 10.50 33.30 35.00 35.55 55.20 23.00
1.898 .540 1.150 1.686 .130 .413 1.311 1.378 1.400 2.173 .906
shell
size
S
Max IU
min.
V
Max WX
Max
Y
Max ZAB
Max
AC
Max
AD
Max
4.06
.160
1.55 Max.
.061
Ø A
D, H, M, S, Y, AC
plug backshell assembly
overall length
backnut type 01
straight cable clamp
type 02
elbow cable clamp
type 03
backshell for heatshrink
sleeving type 17
backnut for heatshrink
sleeving type 57
backshell for solder
shield termination
type 18
Ø B
G
H
Ø E
F
J
M
R
S
W
AB
AC
Y
X
Q
T
Ø N
Ø O
Ø U
ØAD
ØZ
Ø V
L 1
Ø K
Ø C
12.85 Max.
.506
P
48
8525 Series
Square flange receptacle type 10
panel cut-out
812.03 2.35 17.35 30.30 23.30 14.53 13.61 4.75 25.90
.474 .093 .683 1.193 .917 .572 .536 .187 1.020
10 15.01 2.35 17.35 30.30 26.60 17.70 16.79 4.75 25.90
.591 .093 .683 1.193 1.047 .697 .661 .187 1.020
12 19.07 2.35 17.35 30.30 31.35 22.73 20.93 4.75 25.90
.751 .093 .683 1.193 1.234 .895 .824 .187 1.020
14 22.25 2.35 17.35 30.30 34.55 25.65 24.08 4.75 25.90
.876 .093 .683 1.193 1.360 1.010 .948 .187 1.020
16 25.42 2.35 17.35 30.30 37.70 28.83 27.23 4.75 25.90
1.001 .093 .683 1.193 1.484 1.135 1.072 .187 1.020
18 28.60 2.35 17.35 30.30 40.90 32.00 30.40 4.75 25.90
1.126 .093 .683 1.193 1.610 1.260 1.197 .187 1.020
20 31.77 2.55 18.95 32.00 45.65 35.18 33.58 6.35 27.50
1.251 .100 .746 1.260 1.797 1.385 1.322 .250 1.083
22 34.95 2.55 18.95 32.00 48.85 38.35 36.75 6.35 27.50
1.376 .100 .746 1.260 1.923 1.510 1.447 .250 1.083
24 38.12 2.55 19.00 32.00 52.00 41.53 39.93 5.55 27.50
1.501 .100 .748 1.260 2.047 1.635 1.572 .219 1.083
shell
size
A
Max B C D
Max
F
Max G H J
Max
L
Max
Jam nut receptacle type 17
8
12.02 12.78 6.50 - 14.27 1.97 21.02 15.09 3.10 3.10 15.10 14.70 3.50 2.30
.473 .503 .256 - .562 .078 .828 .594 .122 .122 .594 .579 .138 .091
10
14.99 12.78 6.50 - 17.06 1.97 24.22 18.26 3.10 3.10 18.25 17.50 3.50 2.30
.590 .503 .256 - .672 .078 .954 .719 .122 .122 .719 .689 .138 .091
12
19.05 12.78 6.50 7.75 19.83 1.97 26.58 20.62 3.10 3.10 20.60 20.20 3.50 2.30
.750 .503 .256 .305 .781 .078 1.046 .812 .122 .122 .811 .795 .138 .091
14
22.23 12.78 6.50 7.75 23.01 1.97 28.96 23.01 3.10 3.10 23.00 23.40 3.50 2.30
.875 .503 .256 .305 .906 .078 1.140 .906 .122 .122 .906 .921 .138 .091
16
25.40 12.78 6.50 7.75 26.18 1.97 31.33 24.61 3.10 3.10 24.60 26.60 3.50 2.30
1.000 .503 .256 .305 1.031 .078 1.233 .969 .122 .122 .969 1.047 .138 .091
18
28.58 12.78 6.50 7.75 29.36 1.97 33.72 26.97 3.10 3.10 27.00 29.80 3.50 2.30
1.125 .503 .256 .305 1.156 .078 1.328 1.062 .122 .122 1.063 1.173 .138 .091
20
31.75 14.82 6.10 7.30 31.74 2.38 36.90 29.37 3.10 3.10 29.40 32.20 3.50 5.40
1.250 .583 .240 .287 1.250 .094 1.453 1.156 .122 .122 1.157 1.268 .138 .213
22
34.93 14.82 6.10 7.30 34.92 2.38 40.07 31.75 3.10 3.10 31.75 35.30 3.50 5.40
1.375 .583 .240 .287 1.375 .094 1.578 1.250 .122 .122 1.250 1.390 .138 .213
24
38.10 15.62 5.30 6.50 38.09 2.38 43.26 34.92 3.75 3.80 34.90 38.40 3.50 5.40
1.500 .615 .209 .256 1.500 .094 1.703 1.375 .148 .150 1.374 1.512 .138 .213
shell
size
A
Max
B
Max
C
#20 #12-#16
D
Max
E
Max
F
Max G H J K L M N
Max
Square flange hermetic receptacle type 02 H
812.03 1.37 11.70 29.80 21.00 15.09 14.43 3.05 3.17 2.21 25.50
.474 .054 .461 1.173 .827 .594 .568 .120 .125 .087 1.004
10 15.01 1.37 11.70 29.80 24.25 18.26 17.40 3.05 3.17 2.21 25.50
.591 .054 .461 1.173 .955 .719 .685 .120 .125 .087 1.004
12 19.07 1.37 11.70 29.80 26.55 20.62 21.95 3.05 3.17 2.21 25.50
.751 .054 .461 1.173 1.045 .812 .864 .120 .125 .087 1.004
14 22.25 1.37 11.70 29.80 28.90 23.01 25.12 3.05 3.17 2.21 25.50
.876 .054 .461 1.173 1.138 .906 .989 .120 .125 .087 1.004
16 25.42 1.37 11.70 29.80 31.30 24.61 28.27 3.05 3.17 2.21 25.50
1.001 .054 .461 1.173 1.232 .969 1.113 .120 .125 .087 1.004
18 28.60 1.37 11.70 29.80 33.70 26.97 31.45 3.05 3.17 2.21 25.50
1.126 .054 .461 1.173 1.327 1.062 1.238 .120 .125 .087 1.004
20 31.77 2.20 14.35 31.60 36.90 29.36 34.62 3.05 3.17 5.38 27.30
1.251 .087 .565 1.244 1.453 1.156 1.363 .120 .125 .212 1.075
22 34.95 2.20 14.35 31.60 40.00 31.75 37.80 3.05 3.17 5.38 27.30
1.376 .087 .565 1.244 1.575 1.250 1.488 .120 .125 .212 1.075
24 38.12 2.20 14.35 31.60 43.30 34.92 41.02 3.73 3.17 5.38 27.30
1.501 .087 .565 1.244 1.705 1.375 1.615 .147 .125 .212 1.075
shell
size
A
Max
B
Max
C
Max
D
Max
E
Max FG H J
Max
K
Max
L
Max
panel cut-out
Ø A
F
Ø H
Ø G
F
Ø A
Ø D
C4 holes Ø H
G
G
F
F
E
B
Ø G
E
D
C
K
J
L4.06
.160
with backnut
gasket sold separately
1.55 Max.
.061
B
Ø A
Ø F
D
C
J
M
N
K
Ø L
Ø J
L4.06
.160
with backnut
B
F
K
1.55 Max.
.061
panel cut-out
49
8525 Series
panel cut-out
panel cut-out
panel cut-out
812.02 11.71 7.60 - 14.27 0.90 16.12 14.70
.473 .461 .299 - .562 .035 .635 .579
10 14.99 11.71 7.60 - 17.06 0.90 19.30 17.50
.590 .461 .299 - .672 .035 .760 .689
12 19.05 11.71 7.60 8.80 19.83 0.90 21.68 20.20
.750 .461 .299 .346 .781 .035 .854 .795
14 22.23 11.71 7.60 8.80 23.01 0.90 24.86 23.40
.875 .461 .299 .346 .906 .035 .979 .921
16 25.40 11.71 7.60 8.80 26.18 0.90 28.03 26.60
1.000 .461 .299 .346 1.031 .035 1.104 1.047
18 28.58 11.71 7.60 8.80 29.36 0.90 31.18 29.80
1.125 .461 .299 .346 1.156 .035 1.228 1.173
20 31.75 13.34 7.55 8.80 31.74 0.90 33.57 32.10
1.250 .525 .297 .346 1.250 .035 1.322 1.264
22 34.92 13.34 7.55 8.80 34.92 0.90 36.77 35.30
1.375 .525 .297 .346 1.375 .035 1.448 1.390
24 38.10 14.14 6.75 8.00 38.09 0.90 39.94 38.40
1.500 .557 .266 .315 1.500 .035 1.572 1.512
shell
size
A
Max
B
Max
D
Max
E
Max
F
Max
G
Max
Solder mounting hermetic receptacle type IH
812.02 17.70 27.37 2.65 24.07 14.60 13.60 1.57 4.75
.473 .697 1.078 .104 .948 .575 .535 .062 .187
10 14.99 17.70 30.57 2.65 27.22 17.70 16.80 1.57 4.75
.590 .697 1.204 .104 1.072 .697 .661 .062 .187
12 19.05 17.70 35.32 2.65 32.00 22.70 20.90 1.57 4.75
.750 .697 1.391 .104 1.260 .894 .823 .062 .187
14 22.23 17.70 38.50 2.65 35.17 25.70 24.10 1.57 4.75
.875 .697 1.516 .104 1.385 1.012 .949 .062 .187
16 25.40 17.70 41.67 2.65 38.35 28.80 27.20 1.57 4.75
1.000 .697 1.641 .104 1.510 1.134 1.071 .062 .187
18 28.58 17.70 44.85 2.65 41.52 32.00 30.40 1.57 4.75
1.125 .697 1.766 .104 1.635 1.260 1.197 .062 .187
20 31.75 19.30 49.62 3.40 46.27 35.20 33.60 1.57 6.35
1.250 .760 1.954 .134 1.822 1.386 1.323 .062 .250
22 34.93 19.30 52.77 3.40 49.47 38.40 36.80 1.57 6.35
1.375 .760 2.078 .134 1.948 1.512 1.449 .062 .250
24 38.10 19.30 55.97 3.40 52.62 41.50 39.90 1.57 5.55
1.500 .760 2.204 .134 2.072 1.634 1.571 .062 .219
shell
size
A
Max
B
Max
D
Max
E
Max
F
Max G H J
min
J
Max
Jam nut hermetic receptacle type 07H
8
12.02 13.56 5.75 - 14.27 2.75 26.40 18.10 3.80 3.80 18.10 14.70 3.50
.473 .534 .226 - .562 .108 1.039 .713 .150 .150 .713 .579 .138
10
14.99 13.56 5.75 - 17.06 2.75 28.90 20.62 3.80 3.80 20.62 17.50 3.50
.590 .534 .226 - .672 .108 1.138 .812 .150 .150 .812 .689 .138
12
19.05 13.56 5.75 7.00 19.83 2.75 32.10 23.82 3.80 3.80 23.82 20.20 3.50
.750 .534 .226 .276 .781 .108 1.264 .938 .150 .150 .938 .795 .138
14
22.23 13.56 5.75 7.00 23.01 2.75 34.50 26.18 3.80 3.80 26.18 23.40 3.50
.875 .534 .226 .276 .906 .108 1.358 1.031 .150 .150 1.031 .921 .138
16
25.40 13.56 5.75 7.00 26.18 2.75 36.80 28.57 3.80 3.80 28.57 26.60 3.50
1.000 .534 .226 .276 1.031 .108 1.449 1.125 .150 .150 1.125 1.047 .138
18
28.58 13.56 5.75 7.00 29.36 2.75 38.80 30.55 3.80 3.80 30.55 29.80 3.50
1.125 .534 .226 .276 1.156 .108 1.528 1.203 .150 .150 1.203 1.173 .138
20
31.75 15.99 4.95 6.20 31.74 3.55 42.80 32.94 3.80 3.80 32.94 32.20 3.50
1.250 .630 .195 .244 1.250 .140 1.685 1.297 .150 .150 1.297 1.268 .138
22
34.93 15.99 4.95 6.20 34.92 3.55 44.80 34.92 3.80 3.80 34.92 35.30 3.50
1.375 .630 .195 .244 1.375 .140 1.764 1.375 .150 .150 1.375 1.390 .138
24
38.10 16.79 4.15 5.40 38.09 3.55 47.90 38.10 3.80 3.80 38.10 38.40 3.50
1.500 .661 .163 .213 1.500 .140 1.886 1.500 .150 .150 1.500 1.512 .138
shell
size
A
Max
B
Max
C
#20 #12-#16
C
#20 #12-#16
D
Max
E
Max
F
Max G H J KLM
Square flange hermetic receptacle type 02 H specif. 002
Ø A
Ø D
E
Ø J
B
C
E
Ø A
E
Ø D
B
Ø A
H
Ø G
Ø F
Ø D
Ø G
K
Ø L
G
4 holes Ø H
F
M
G
F
C Max.
sealing gasket
B
K
J
50
8525 Series
polarization
please contact us
Receptacle with straight spill contacts
shell size 8
A
min 16.30 16.30 16.30 16.30 16.30 16.30 14.40 14.40 13.60
.642 .642 .642 .642 .642 .642 .567 .567 .535
Max 17.50 17.50 17.50 17.50 15.50 17.50 15.70 15.70 15.10
.689 .689 .689 .689 .610 .689 .618 .618 .594
B0/-0.2 7.30 7.30 7.30 7.30 7.30 7.30 7.30 7.30 7.30
.287 .287 .287 .287 .287 .287 .287 .287 .287
CMax 1.37 1.37 1.37 1.37 1.37 1.37 2.20 2.20 2.20
.054 .054 .054 .054 .054 .054 .087 .087 .087
D
min 12.50 12.50 12.50 12.50 12.50 12.50 12.50 12.50 12.50
.492 .492 .492 .492 .492 .492 .492 .492 .492
Max 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40 13.40
.528 .528 .528 .528 .528 .528 .528 .528 .528
E0/-02 7.30 7.30 7.30 7.30 7.30 7.30 7.30 7.30 7.30
.287 .287 .287 .287 .287 .287 .287 .287 .287
10 12 14 16 18 20 22 24
TYPE
10
TYPE
17
AD
E
C
B
# 20 Ø 0.6/.024
# 16 Ø 1/.039
# 20 Ø 0.6/.024
# 16 Ø 1/.039
receptacle type 10 receptacle type 17
contact type
male / female
contact layout
please contact us
basic series SN 845 - * * - * * PS *
Pin / socket hermetic through bulkhead (Specials SHTP)
Ordering information
Dimensions
shell A BCDE FGH I
size Max
84.75 12.02 17.70 2.60 31.40 23.82 13.60 14.60 26.97
.187 .473 .697 .102 1.236 .938 .535 .575 1.062
10 4.75 14.99 17.70 2.60 31.40 26.97 16.80 17.70 30.17
.187 .590 .697 .102 1.236 1.062 .661 .697 1.188
12 4.75 19.05 17.70 2.60 31.40 31.75 20.90 22.70 34.92
.187 .750 .697 .102 1.236 1.250 .823 .894 1.375
14 4.75 22.23 17.70 2.60 31.40 34.92 24.10 25.70 38.10
.187 .875 .697 .102 1.236 1.375 .949 1.012 1.500
16 4.75 25.40 17.70 2.60 31.40 38.10 27.20 28.80 41.27
.187 1.000 .697 .102 1.236 1.500 1.071 1.134 1.625
18 4.75 28.58 17.70 2.60 31.40 41.27 30.40 32.00 44.45
.187 1.125 .697 .102 1.236 1.625 1.197 1.260 1.750
20 6.35 31.75 19.30 3.40 34.60 46.02 33.60 35.20 49.22
.250 1.250 .760 .134 1.362 1.812 1.323 1.386 1.938
22 6.35 34.93 19.30 3.40 34.60 49.22 36.80 38.40 52.37
.250 1.375 .760 .134 1.362 1.938 1.449 1.512 2.062
24 5.55 38.10 19.30 3.40 34.60 52.37 39.90 41.50 55.57
.219 1.500 .760 .134 1.362 2.062 1.571 1.634 2.188
A
D
C
E
ØB
F
ØI
G
ØH
51
8525 Series
88525-866 A - - 3.00 - -
.118 - -
10 8525-867 A - - 4.00 - -
.157 - -
12 8525-868 A 8525-860 A - 7.92 5.58 -
.312 .220 -
14 8525-869 A 8525-861 A - 11.09 7.92 -
.437 .312 -
16 8525-870 A 8525-861 A - 11.09 7.92 -
.437 .312 -
18 8525-871 A 8525-862 A 8525-861 A 14.27 11.09 7.92
.562 .437 .312
20 8525-872 A 8525-863 A 8525-862 A 15.87 14.27 11.09
.625 .562 .437
22 8525-873 A 8525-864 A 8525-863 A 19.04 15.87 14.27
.750 .625 .562
24 8525-874 A 8525-865 A 8525-864 A 23.79 19.04 15.87
.937 .750 .625
shell
size
outer
bushings
inner
bushings N°1
inner
bushings N°2
A B C
88525-1431 MS9068-016 70617 A 70617 A
10 8525-1432 MS9068-018 70618 A 70618 A
12 8525-1433 MS9068-021 70619 A 70619 A
14 8525-1434 MS9068-023 70620 A 70620 A
16 8525-1435 MS9068-025 70621 A 70621 A
18 8525-1436 MS9068-027 70622 A 70622 A
20 8525-1437 MS9068-029 70623 A 70709 A
22 8525-1438 MS9068-030 70624 A 70623 A
24 8525-1439 MS9068-031 70625 A 70624 A
shell size
Gaskets
part numbersBackshell bushings
part numbers
gaskets for square flange receptacle O-rings for jam nut receptacle
O-rings for square flange receptacle type
types 10 and 02 H (ordered separately) type 17 07 H (spare O-ring) 02 H suffix. 002 (spare O-ring)
Accessories
C
inner bushing N° 1
N° 2
inner bushing
outer bushing
B
A
Reusable fixing plate
Two, three or four-holes self-locking fixing-plates are available at SHTP see page 126.
52
8525 Series
specification - metal chain, leave blank
26 - nylon cord
shell size 08-10-12-14-16-18-20-22-24
plating R- black anodized
N- nickel
J- yellow cadmium
cap type
26 - cap for plug (fixing on plug)
27 - cap for square flange receptacle
28 - cap for plug (fixing on backshell)
29 - cap for jam nut receptacle
basic series 852 - 28 R 18 ••
Caps
819.00 21.50 14.80 3.50 16.80 19.90 3.50 14.80 84.00 80.00 128.00 84.00 132.00 80.00 128.00
.748 .846 .583 .138 .661 .783 .138 .583 3.307 3.150 5.039 3.307 5.197 3.150 5.039
10 21.80 21.50 18.00 3.50 19.80 19.90 3.50 17.90 84.00 80.00 128.00 84.00 132.00 80.00 128.00
.858 .846 .709 .138 .780 .783 .138 .705 3.307 3.150 5.039 3.307 5.197 3.150 5.039
12 26.10 21.50 22.70 3.50 23.90 19.90 3.50 22.70 100.00 90.00 140.00 100.00 148.00 90.00 140.00
1.028 .846 .894 .138 .941 .783 .138 .894 3.937 3.543 5.512 3.937 5.827 3.543 5.512
14 29.30 21.50 25.90 3.50 27.00 19.90 3.50 25.90 100.00 90.00 140.00 100.00 148.00 90.00 140.00
1.154 .846 1.020 .138 1.063 .783 .138 1.020 3.937 3.543 5.512 3.937 5.827 3.543 5.512
16 32.50 21.50 29.00 3.50 30.20 19.90 3.50 29.00 100.00 90.00 140.00 100.00 148.00 90.00 140.00
1.280 .846 1.142 .138 1.189 .783 .138 1.142 3.937 3.543 5.512 3.937 5.827 3.543 5.512
18 35.30 21.50 32.20 3.50 33.40 19.90 3.50 32.20 100.00 90.00 140.00 100.00 148.00 90.00 140.00
1.390 .846 1.268 .138 1.315 .783 .138 1.268 3.937 3.543 5.512 3.937 5.827 3.543 5.512
20 38.80 21.50 35.40 3.50 36.50 21.50 3.50 35.40 116.00 110.00 153.00 116.00 116.00 110.00 153.00
1.528 .846 1.394 .138 1.437 .846 .138 1.394 4.567 4.331 6.024 4.567 4.567 4.331 6.024
22 42.00 21.50 38.60 3.50 39.80 21.50 3.50 38.60 116.00 110.00 153.00 116.00 116.00 110.00 153.00
1.654 .846 1.520 .138 1.567 .846 .138 1.520 4.567 4.331 6.024 4.567 4.567 4.331 6.024
24 45.10 22.30 41.70 3.50 42.90 22.30 3.50 41.70 116.00 110.00 153.00 116.00 116.00 110.00 153.00
1.776 .878 1.642 .138 1.689 .878 .138 1.642 4.567 4.331 6.024 4.567 4.567 4.331 6.024
shell
size
A
Max
B
Max
C
Max DE
Max
F
Max GH
Max L1 L2 L3 L4 L5 L6 L7
caps for receptacle caps for plug
L1
L3 L2
L1
B
B
B
B
L5
F
Ø D
Ø G Ø G
Ø A
Ø A
Ø A
Ø A
type 27
type 27 ...26 type 29 ...26
type 28
type 29
Ø D
Ø C
Ø E
L4
F
type 26
Ø H
Ø E
L7
F
type 28 ...26
Ø G
Ø E
L6
F
type 26 ...26
Ø G
Ø E
120
8LT-8D-8ST-8T
75 8LT
8D
8ST
2 # 8 *
18 8LT
8D
8ST
8T
18 # 20 *
05 8LT
8D
8ST
5 # 20 *
26 8D
2 # 12 *
6 # 22D
04 8D
8ST
8LT
4 # 16
04 8LT
8D
8ST
4 # 20
35 8LT
8D
8ST
6 # 22D 8T
35 8LT
8D
8ST
8T
13 # 22D
35 8LT
8D
8ST
8T
22 # 22D
35 8LT
8D
8ST
8T
37 # 22D
35 8LT
8D
8ST
8T
55 # 22D
35 8LT
8D
8ST
8T
66 # 22D
35 8LT
8D
8ST
8T
79 # 22D
35 8LT
8D
8ST
8T
128 # 22D
29 8LT
8D
8ST
8T
29 # 16
Contact layouts for 8LT-8D-8ST-8T - viewed from front face of male insulator
09 08
11 10
61 8LT
8D
8ST
8T
61 # 20
43 8LT
8D
8ST
23 # 20
20 # 16
46 8LT
8D
8ST
40 # 20
4 # 16 - 2 # 8 *
24 8LT
8D
8ST
8T
12 # 16
12 # 12
19 8LT
8D
8ST
19 # 12
41 8LT
8D
8ST
8T
41# 20
16 8LT
8D
8ST
8T
16 # 16
11 8LT
8D
8ST
8T
11 # 12
75 8LT
8ST
4 # 8 *
39 8LT
8D
8ST
37 # 20
2 # 16
32 8LT
8D
8ST
32 # 20
11 8LT
8D
8ST
11 # 16
26 8LT
8D
8ST
26 # 20
06 8LT
8D
8ST
8T
6 # 12
08 8LT
8D
8ST
8T
8 # 16
99 8LT
8D
8ST
8T
2 # 16
21 # 20
98 8LT
8D
8ST
3 # 20
98 8LT
8D
8ST
6 # 20
98 8LT
8D
8ST
10 # 20
19 8LT
8D
8ST
19 # 20
01 8LT
8D
8ST
1 # 12
08 8LT
8D
8ST
8 # 20
05 8LT
8D
8ST
5 # 16
97 8LT
8D
8ST
8 # 20
4 # 16
13 12
15 14
17 16
19 18
21 20
23 22
25 24
25 24
shell size
8LT-8D 8ST-8T
08 8D
8 # 8 triaxial *
04 8D
48 # 20
8 # 16
Please consult us for the
composite version
35 8LT
8D
8ST
8T
100 # 22D
53 8LT
8D
8ST
53 # 20
21 8LT
8D
8ST
21 # 16
size 22 contacts
size 20 contacts
size 16 contacts
size 12 contacts
size 8 triaxial contacts
size 8 coaxial contacts
not QPL approved to
date
contact layouts available
with receptacle type 2
121
8LT-8D-8ST-8T
Standard contacts for 8LT-8D-8ST
standard contacts MIL - C contacts
part numbers
contact size contact type without colour code part numbers profile and colour code
NOTES : (1) Boots for sealing to be ordered separately
orange
blue
black
orange
yellow
grey
orange
blue
orange
orange
green
brown
orange
blue
yellow
orange
green
red
orange
blue
green
orange
green
orange
Standard contacts for 8T
standard contacts MIL - C contacts
part numbers
contact size contact type without colour code part numbers profile and colour code
male 8599-0702 M39029/58.360
# 22D
female 8599-0710 M39029/57.354
male 8599-0703 M39029/58.363
# 20
female 8599-0711 M39029/57.357
male 8599-0704 M39029/58.364
# 16
female 8599-0712 M39029/57.358
male 8599-0705 M39029/58.365
# 12
female 8599-0713 M39029/57.359
orange
blue
black
orange
green
yellow
orange
blue
orange
orange
green
purple
orange
blue
yellow
orange
green
grey
orange
blue
green
orange
green
white
# 22D
# 20
# 16
# 12
# 8
male 8599-0702 M39029/58.360
female 8599-0706 M39029/56.348
male 8599-0703 M39029/58.363
female 8599-0707 M39029/56.351
male 8599-0704 M39029/58.364
female 8599-0708 M39029/56.352
male 8599-0705 M39029/58.365
female 8599-0709 M39029/56.353
male 8599-7740 _
female 8599-7741 _
boot 8590-4571 _
122
8LT-8D-8ST-8T
Coaxial and triaxial contacts for 8LT-8D-8ST
Thermocouple contacts for 8LT-8D-8ST
NOTES : (1) Boots for sealing to be ordered separately - (2) Please consult us.
standard contacts MIL - C contacts
part numbers
contact size contact type without colour code part numbers profile and colour code
yellow
red
yellow
yellow
red
grey
red
brown
brown
yellow
brown
blue
# 16
coaxial
contact
# 12
coaxial
contact
# 8
coaxial
contact
# 8
coaxial
contact
# 8
triaxial
contact
male 8599-0916
female 8599-0920
male 8599-0980 (2)
M39029/28.211 (2)
(SN 1891K-0980) (2)
female 8599-0990 (2)
M39029/75.416 (2)
(SN 1891K-0990) (2)
male SN 1891K-0810 M39029/59.366
female SN 1891K-0820 M39029/60.367
boot 8590-4571 (2) _
male SN 1891K-0811 (2) _
female SN 1891K-0821 (2) _
boot 8977-343A (1) (2) _
male 8599-0988 M39029/90.529
yellow
purple
blue
yellow
grey
grey
yellow
purple
green
yellow
grey
purple
# 20
chromel
# 20
alumel
male 8599-0749 8599-0949
yellow dot
female 8599-0753 8599-0953
yellow dot
male 8599-0761 8599-0961
black dot
female 8599-0765 8599-0965
black dot
female 8599-0998 M39029/91.530
boot 8590-4571 (1) _
standard contacts MIL - C contacts
part numbers
contact size contact type without colour code part numbers profile and colour code
123
8LT-8D-8ST-8T
Dimensions - crimp contacts straight spill contacts
wire wrap contact
contact contact contact Ø spill Ø
size type (mm) (mm)
male
long spill 0.76 0.70
male
short spill 0.76 0.70
female
long spill 0.76 0.70
male
specif spill 0.76 0.50
female
short spill 0.76 0.70
female
specif spill 0.76 0.50
male
short spill 1 0.70
female
short spill 1 0.70
male
short spill 1.6 1
female
short spill 1.6 1
Straight spill contacts for 8LT - 8D
Wire wrap for 8D
contact size contact type part number profile
male long spill 8599-0720
male short spill 8599-0730
male specific spill 8599-0796
female long spill 8599-0721
female short spill 8599-0731
female specific spill 8599-0797
male short spill 8599-0724
female short spill 8599-0725
male short spill 8599-0726
male short spill 8599-0727
male SN1891K16-050M
(2)
# 22D
# 20
# 16
# 16
coaxial contact
contact size contact type part number profile
male 8599-0790
male 8599-0791
# 22D
# 22D
# 22D male/female 0.76 28 22 0.095 0.34 0.76 1.37
# 20 male/female 1 24 20 0.21 0.60 1.02 2.11
# 16 male/female 1.6 20 16 0.60 1.34 1.65 2.77
# 12 male/female 2.4 14 12 1.91 3.18 2.46 3.61
# 8 male/female 3.64 _ 8 - 8.98 4.50 6.50
# 16
coaxial contact
male/female 1.6 1.65 2.60
RG 174 - RG 179 - RG 316
# 12
coaxial contact
male/female 2.4 2.40 2.60
RG 174 - RG 179 - RG 316
# 8
coaxial contact
male/female 5.5 _ 2.80
RG 188A/U
# 8 (1)
coaxial contact
male/female 5.5 4.6 4.80
# 8
triaxial contact
male/female 5.5 3.15 3.40
NRFC - 50 - COAX 3 - SSQ 21 653
MIL-C 17/176.00002 - FILECA F. 2703/14
RAYCHEM CHEMINAX 10612 - FILOTEX M 17/176.00002
# 22D
# 20
# 16
contact size contact type contact ∅(mm)
# 22D male 0.76 0.86
# 22 male 1 0.86
Note : (1) SN1891K - 0811/0821 : please consult us.
(2) Please consult us.
contact contact contact conductor section external ∅over
size type ∅AWG mm insulation
min Max. min Max. min Max.
124
8LT-8D-8ST-8T
male — — M22520/2-09 8476-09
22D
female — — M22520/2-07 8476-07
0.60 20 male M22520/1-04 8365-04 M22520/2-10 8476-10
20 0.38 22
0.21 24 female M22520/1-04 8365-04 M22520/2-10 8476-10
1.34 16 male M22520/1-04 8365-04 — —
16 0.93 18
0.60 20 female M22520/1-04 8365-04 — —
3.18 12 male M22520/1-04 8365-04 — —
12 1.91 14 female M22520/1-04 8365-04 — —
8.98 8
male JAT M810G — JAT T810G
8
female JAT M810G — JAT T810G
Coaxial contact # 16
Tooling for 8LT-8D-8ST-8T
crimping
Coaxial contact # 12
(SN 1891K-0980 and SN 1891K-0990)
0.38 22
0.21 24
0.15 26
0.095 28
part number plier part number plier
M22520 / 1-01 M22520 / 2-01
contact wire size type (FCI Souriau 8365) (FCI Souriau 8476-01)
size part number turret part number locator
mm2AWG NORME/SPEC FCI Souriau NORME/SPEC FCI Souriau
inner contact M22520/2.01 M22520/2.35
outer contact M22520/4.01 M22520/4.02
Coaxial contact # 8
(SN 1891K-0810 and SN 1891K-0820)
contact type pliers locators stripping tool
inner contact M22520/2.01 SN 1891 K 101 SN 1891 K 102
outer contact M22520/5.01 Y 248 SN 1891 K 102
Coaxial contact # 8
(SN 1891K-0811 and SN 1891K-0821)
contact type pliers locators stripping tool
inner contact M22520/2.01 SN 1891 K 101 (1)
outer contact (1) (1) (1)
contact type pliers locators
outer contact
(male and female) M22520/5.01 8976-730
inner contact (male) M22520/2.01 8976-720
inner contact (female) M22520/2.01 8972-710
Triaxial contact # 8
(8599-0988 and 8599-0998)
contact type pliers locators
middle contact M22520/2.01 M22520/2.37
inner contact M22520/2.01 SN 1767 K 100
ferrule M22520/5.01 Y631
(1) Please consult us.
contact type pliers locators
125
8LT-8D-8ST-8T
Insertion and extraction
of wired contacts for 8LT-8D-8ST-8T
Reusable fixing plate
Two, three or four holes self-locking fixing plates are available at SHTP, see page 126.
Filler plugs
These filler plugs are installed at the rear of unwired contacts to maintain
connector sealing.
Dummy contact for cavity of triaxial and coaxial contacts # 8 : 8599-0308.
suffix
plating - olive green cadmium
F- nickel (for 8T only)
size
basic series SN1097 •• • A
Coupling ring adapter for 8T-8LT (SHTP)
part numbers
contact
size SPEC FCI Souriau Colour
# 22D MS27488-22 8660-212 black
# 20 MS27488-20 8522-389A red
# 16
MS27488-16 8522-390A bluestandard &
coaxial
# 12
MS27488-12 8522-391A yellowstandard &
coaxial
SN1097-08-*A 28 19.70
1.102 0.776
SN1097-09 A SN1097-10-*A 30.8 22.20
1.213 0.874
SN1097-11 A SN1097-12-*A 35.1 26.60
1.382 1.047
SN1097-13 A SN1097-14-*A 38.3 29.80
1.508 1.173
SN1097-15 A SN1097-16-*A 41.5 32.90
1.634 1.295
SN1097-17 A SN1097-18-*A 44.7 36.10
1.760 1.421
SN1097-19 A SN1097-20-*A 47.5 39.30
1.870 1.547
SN1097-21 A SN1097-22-*A 50.6 42.10
1.992 1.657
SN1097-23 A SN1097-24-*A 53.8 45.10
2.118 1.776
SN1097-25 A 57.10 48.40
2.248 1.906
part number
HE 308 (8LT) HE 309 (8T)
A
Max B
* Plating type
0.197
Ø A
Ø B
1.260
contact part numbers colour
size SPEC FCI Souriau insert. extract
# 22D M81969/14-01 _ green white
# 20 M81969/14-10 _ red white
# 16
standard & M81969/14-03 _ blue white
coaxial
# 12
standard & M81969/14-04 _ yellow white
coaxial
# 8 _ _ manual steel
insertion
# 8
coaxial & _ 8660-197 manual steel
triaxial insertion
