CTS ATS/ATS-SM Series
COMMUNICATIONS COMPONENTS Crystals
Features:
•Frequency Range: 3.5 to 60 MHz
• Through Hole or Surface Mount
• Rugged Resistance Weld Seal
• Low Cost: AT-Cut Resonators
• Unique Frequencies or Tolerances also Available
These low profile AT-Cut crystals are ideal for dense board layouts or tight headroom limits.
These rugged (metal can) resistance weld seal parts have the same favorable temperature stability
as the full size MP-Series crystals and are available bulk packed or tape-and-reel loaded.
Electrical Specifications:
Example Part Numbers:
171 Covington Dr. • Bloomingdale, IL 60108-3107
Phone 800-757-6686 • Fax 630-295-6608 • E-Mail: www.ctscorp.com
CRYSTALS
CRYSTALS
CRYSTALS
CRYSTALS
PART
NUMBER
FREQUENCY
(MHz)
LOAD/
SERIES
PART
NUMBER
FREQUENCY
(MHz)
LOAD/
SERIES
PART
NUMBER
FREQUENCY
(MHz)
LOAD/
SERIES
A
TS036 3.579545 18pF
A
TS08ASM 8.000000 20pF
A
TS08ASM 8.000000 20pF
A
TS036SM 3.579545 18pF
A
TS098 9.830400 20pF
A
TS143SM 14.318180 SERIES
A
TS037 3.686400 20pF
A
TS098SM 9.830400 20pF
A
TS15
A
15.360000 20pF
A
TS037SM 3.686400 20pF
A
TS10ASM 10.000000 20pF
A
TS15ASM 15.360000 20pF
A
TS040 4.000000 20pF
A
TS100 10.000000 SERIES
A
TS160 16.000000 SERIES
A
TS040SM 4.000000 20pF
A
TS100SM 10.000000 SERIES
A
TS160SM 16.000000 SERIES
A
TS042 4.915200 20pF
A
TS111 11.059200 20pF
A
TS200 20.000000 SERIES
A
TS042SM 4.915200 20pF
A
TS111SM 11.059200 20pF
A
TS200SM 20.000000 SERIES
A
TS050 5.068800 20pF
A
TS120 12.000000 SERIES
A
TS204 20.480000 20pF
A
TS050SM 5.068800 20pF
A
TS120SM 12.000000 SERIES
A
TS204SM 20.480000 20pF
A
TS060 6.000000 20pF
A
TS122 12.288000 20pF
A
TS245 24.576000 SERIES
A
TS060SM 6.000000 20pF
A
TS122SM 12.288000 20pF
A
TS245SM 24.576000 SERIES
A
TS08
A
8.000000 20pF
A
TS143 14.318180 SERIES
Parameter Specification
Frequency Range 3.5 - 60 MHz
Calibration Tolerance ±0.003% (±30 ppm) at + 25°C
Temperature Stability ±0.005% (±50 ppm) Ref. + 25°C reading
Operating Temperature Range -20°C to +70°C (Std.) or -40°C to +85°C
Operating Mode Fundamental (or 3
rd
O.T. as applicable)
Drive Level 100 Microwatts
Shunt Capacitance 7pF, Max
Aging <5 ppm/Yr.
Mechanical/Environmental Specifications
Package Type: Leak Test
Metal cover; hermetic seal base <2x10-8cc-atm/sec
resistance weld seal
Storage Temperature: Insulation Resistance:
-40 to +85°C 500 Mohm min @ 100V
Solder Reflow Capability:
+260°C for 10 seconds Maximum
Ordering Information
A complete part number looks like:
ATS____ ____ ____ - _*__ for the through hole part, or
ATS____ ____ ____ -SM _*__ for the Surface Mount part
* Optional Suffix codes are:
“INS” = Insulating Spacer (ATS Only)
“T” = Tape and Reel Packaging
“L” = Trimmed Leads
“W” = Trimmed Leads and Insulating Spacer
Custom frequencies specified upon request. Contact CTS for more information
171 Covington Dr. • Bloomingdale, IL 60108-3107
Phone 800-757-6686 • Fax 630-295-6608 • E-Mail: www.ctscorp.com
CTS ATS/ATS-SM Series
COMMUNICATIONS COMPONENTS Crystals
CRYSTALS
CRYSTALS
CRYSTALS
CRYSTALS
