Page 1
Autec Power Systems
667 E Cochran St, Simi Valley, CA93065
Tel: (805)522-0888
Fax: (805)522-8777
www.autec.com
27 March 2013
Model LSWC-200S045ST LSWC-200S070ST LSWC-200S105ST LSWC-200S140ST LSWC-200S175ST LSWC-200S210ST
Output
Voltage
267~444
114~190
86~143
57~95
Current (min-max) 450 mA 700 mA 1050 m A 1400 m A 1750 m A 2100 mA
No load Output
Voltage ± 5 V
467 300 200 150 120 105
Ripple & Noise (3) 13.3 V 8.6 V 5.7 V 4.3 V 3.4 V 2.9 V
Line Regulation 1%
Load Regulation 3%
Turn-on Delay Time
(typ–max)
1.0 ~2.0 S
Leakage 0.7 5 m A Vin=277V, 50Hz
Input
Voltage Range 90 ~ 305 Vac
Frequency Range 47Hz ~63Hz
PFC(2)
110VAC
220VAC
0.99
0.99
0.99
0.99
0.96
0.96
0.96
0.96
Efficie n cy (Typ.) at
220Vac (2)
93.0% 93.0% 93.0% 93.0% 92.0% 91.5%
Inrush Current
65A cold start, Vin=230V
AC Current (Typ.) 2.1 A / 110 VAC 1.0 A / 220 VAC
Protections
Short Circuit
Protection
Prote c tion type : Hiccup mode, recovers automatically after fault condition is removed
Over Temperature
Protection (Typ.)
110 °C
Over Voltage (Typ .) 1.2 Vo ±5% floating deviation (Latch mod e. The pow er sup pl y shall retur n to normal op er ation only aft er the pow er is t urn-on again.)
Environmental
Temperature Range Operational - 35°C ~ 60°C
Storage - 40 ~ +85°C
Humidity Operational 10% ~ 100% RH
Storage 5% ~100% R.H
Safety &
EMC
Safety Standards
UL8750, UL935, UL1012, CSA-C22.2 No.107.1
EN61347-1, EN61347-2-13
EMI Conduction &
Radiation
EN55015
EMS Immunity EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11, EN61547
Others
MTBF
345,000 HOURS
L ife Time
63,000 hours
Dimension
Inches (L*W*H) 7.40*3.07*1.46 Millimeters (L*W*H) 188.5*78*37
Weight
1100G
•
Ultra High Efficiency (Up to 93%)
• Build-in Active PFC (0.99 Typical)
• All-Round protection: OVP, SCP, OTP
• Waterproof (IP67)
• Constant Output Current
SPECIFICATION
FEATURES
200W Constant Current LSWC-200 SERIES
Page 2
Autec Power Systems
667 E Cochran St, Simi Valley, CA93065
Tel: (805)522-0888
Fax: (805)522-8777
www.autec.com
27 March 2013
Model LSWC-200S245ST LSWC-200S280ST LSWC-200S315ST LSWC-200S350ST LSWC-200S420ST
Output
Voltage
49~82
43~71
38~63
34~57
29~48
Current Range 0-2450 m A 0-2800 m A 0-3150 m A 0-3500 m A 0-4200 m A
No load Output
Voltage ± 5 V
90 78 70 63 52
Ripple & Noise (3) 2.4 V 2.1 V 1.9 V 1.7 V 1.4 V
Line Regulation 1%
Load Regulation 3%
Turn-on Delay 1.0 ~2.0 S
Leakage 0.75 mA Vin=277V, 50Hz
Input
Voltage Range 90 ~ 305 Vac
Frequency Range 47Hz ~ 63Hz
PFC (2)
110
220
0.99
0.99
0.99
0.99
0.99
0.96
0.96
0.96
0.96
0.99
Efficie n cy (Typ.) at
220Vac (2)
91.5% 91.5% 91.5% 91.5% 91.5%
Inrush Current 65A cold start, Vin=230V
AC Current (Typ.)
2.1 A / 110 VAC 1.0 A / 220 VAC
Protections
Short Circuit
Protection
Prote c tion type : Hiccup mode, recovers automatically after fault condition is removed
Over Temperature
Protection (Typ.)
110 °C
Over Voltage (Typ .) 1.25% Vo ±5% floating deviati on (Latch mode. The power s upp ly shall return to no rmal op eration o nly aft er the pow er is t urn-on again.)
Environmental
Temperature Range Operational - 35°C ~ 60°C
Storage - 40 ~ +85°C
Humidity Operational 10% ~ 100% RH
Storage 5% ~100% R.H
Safety &
EMC
Safety Standards
UL8750, UL935, UL1012, CSA-C22.2 No.107.1
EN61347-1, EN61347-2-13
EMI Conduction &
Radiation
EN55015
EMS Immunity
EN61000-3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8, EN61000-4-11,
EN61547
Others
MTBF
345,000 hours
L ife Time 63,000 HOURS
Dimension (L*W*H)
Inches (L*W*H) 7.40*3.07*1.46 Millimeters (L*W*H) 188.5*78*37
Weight
1100G
• Ultra High Efficiency (Up to 93%)
• Build-in Active PFC (0.99 Typical)
• All-Round protection: OVP, SCP, OTP
• Waterproof (IP67)
• Constant Output Current
FEATURES
200W Constant Current LSWC-200 SERIES
SPECIFICATION
Page 3
Autec Power Systems
667 E Cochran St, Simi Valley, CA93065
Tel: (805)522-0888
Fax: (805)522-8777
www.autec.com
27 March 2013
NOTE:
1. All specifications are typical at 25°C unless otherwise stated.
2. The “Efficiency” & “PF” values are measured at full load, after the unit is thermally
stabilized, otherwise they will be lower about 1%.
3. The “Ripple & Noise” values are measured by 20MHz bandwidth oscilloscope and the
output paralleled a 0.1uF ceramic capacitor and 10uF electrolytic capacitor.
Mechanical Specification
Derating character
Page 4
Autec Power Systems
667 E Cochran St, Simi Valley, CA93065
Tel: (805)522-0888
Fax: (805)522-8777
www.autec.com
27 March 2013
PART NUMBER SCHEME
LSWC-200S045ST
Total Power
Rated current
Single output
Power Factor Characters
LED Driver
W= Wide input Range 90~305 Vac
Constant current
Steel Case
T= Standard 3 Pin UL
Effic ie nc y vs Lo ad
LSWC-200S045ST
LSWC-200S420ST
LSWC-200S045ST
LSWC-200S420ST
SPECIFIC AT IO NS ARE SUBJEC T TO CHANGE W ITHOUT NOTICE
AUTEC IS NOT RESPONSIBLE FOR ISSUES ARISING FROM ERRORS OR OMMISIONS