February 2007 Rev 3 1/15
15
STGD6NC60HD
N-channel 600V - 7A - DPAK
Very fast PowerMESH™ IGBT
General features
■Low on voltage drop (Vcesat)
■Low CRES / CIES ratio (no cross-conduction
susceptibility)
■Very soft ultra fast recovery antiparallel diode
■High frequency operation
Description
Using the latest high voltage technology based on
a patented strip layout, STMicroelectronics has
designed an advanced family of IGBTs, the
PowerMESH™ IGBTs, with outstanding
performances. The suffix “H” identifies a family
optimized for high frequency application in order
to achieve very high switching performances
(reduced tfall) maintaining a low voltage drop.
Applications
■High frequency inverters
■SMPS and PFC in both hard switch and
resonant topologies
■Motor drivers
Internal schematic diagram
Type VCES
VCE(sat)Max
@25°C
IC
@100°C
STGD6NC60HD 600V <2.5V 7A
1
3
DPAK
www.st.com
Order codes
Part number Marking Package Packaging
STGD6NC60HDT4 GD6NC60HD DPAK Tape & reel
Contents STGD6NC60HD
2/15
Contents
1 Electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
2.1 Electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3 Test circuit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4 Package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
5 Packaging mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
STGD6NC60HD Electrical ratings
3/15
1 Electrical ratings
Table 1. Absolute maximum ratings
Symbol Parameter Value Unit
VCES Collector-emitter voltage (VGS = 0) 600 V
IC(1)
1. Calculated according to the iterative formula:
Collector current (continuous) at TC = 25°C 15 A
IC(1) Collector current (continuous) at TC = 100°C 7A
ICM(2)
2. Pulse width limited by max junction temperature
Collector current (pulsed) 21 A
VGE Gate-emitter voltage ±20 V
IFDiode RMS forward current at Tc=25°C 10 A
PTOT Total dissipation at TC = 25°C 56 W
Tstg Storage temperature
– 55 to 150 °C
TjOperating junction temperature
TlMaximum lead temperature for soldering purpose
(for 10sec. 1.6 mm from case)
300 °C
Table 2. Thermal resistance
Symbol Parameter Value Unit
Rthj-case Thermal resistance junction-case max 2 °C/W
Rthj-amb Thermal resistance junction-ambient max 62.5 °C/W
ICTC
()
TJMAX TC
–
RTHJ C–VCESAT MAX()
TCIC
,()×
------------------------------------------------------------------------------------------------------=
Electrical characteristics STGD6NC60HD
4/15
2 Electrical characteristics
(TCASE=25°C unless otherwise specified)
Table 3. Static
Symbol Parameter Test conditions Min. Typ. Max. Unit
VBR(CES) Collector-emitter
breakdown voltage IC= 1mA, VGE= 0 600 V
VCE(sat) Collector-emitter saturation
voltage
VGE= 15V, IC= 3A
VGE= 15V, IC= 3A, Tc= 125°C
1.9
1.7
2.5 V
V
VGE(th) Gate threshold voltage VCE= VGE, IC= 250 µA 3.75 5.75 V
ICES
Collector cut-off current
(VGE = 0)
VCE= Max rating,TC= 25°C
VCE=Max rating,TC= 125°C
10
1
µA
mA
IGES
Gate-emitter leakage
current (VCE = 0) VGE= ±20V, VCE= 0 ±100 nA
gfs Forward transconductance VCE = 15V, IC= 3A 3S
Table 4. Dynamic
Symbol Parameter Test conditions Min. Typ. Max. Unit
Cies
Coes
Cres
Input capacitance
Output capacitance
Reverse transfer
capacitance
VCE = 25V, f = 1MHz,
VGE = 0
205
32
5.5
pF
pF
pF
Qg
Qge
Qgc
Total gate charge
Gate-emitter charge
Gate-collector charge
VCE = 390V, IC = 3A,
VGE = 15V,
(see Figure 17)
13.6
3.4
5.1
nC
nC
nC
ICL Turn-off SOA minimum
current
Vclamp=390V, Tj=150°C,
RG=10Ω, VGE=15V 19 A
STGD6NC60HD Electrical characteristics
5/15
Table 5. Switching on/off (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit
td(on)
tr
(di/dt)on
Turn-on delay time
Current rise time
Turn-on current slope
VCC = 390V, IC = 3A
RG= 10Ω, VGE= 15V,
Tj= 25°C
(see Figure 18)
12
5
612
ns
ns
A/µs
td(on)
tr
(di/dt)on
Turn-on delay time
Current rise time
Turn-on current slope
VCC = 390V, IC = 3A
RG= 10Ω, VGE= 15V,
Tj=125°C
(see Figure 18)
13
4.3
560
ns
ns
A/µs
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
VCC = 390V, IC = 3A,
RGE = 10Ω, VGE =
15V,TJ=25°C
(see Figure 18)
40
76
100
ns
ns
ns
tr(Voff)
td(off)
tf
Off voltage rise time
Turn-off delay time
Current fall time
VCC = 390V, IC = 3A,
RGE=10Ω, VGE =15V,
Tj=125°C
(see Figure 18)
60
98
124
ns
ns
ns
Table 6. Switching energy (inductive load)
Symbol Parameter Test conditions Min. Typ. Max. Unit
Eon(1)
Eoff(2)
Ets
1. Eon is the tun-on losses when a typical diode is used in the test circuit in figure 2. If the IGBT is offered in
a package with a co-pak diode, the co-pack diode is used as external diode. IGBTs & Diode are at the
same temperature (25°C and 125°C)
2. Turn-off losses include also the tail of the collector current
Turn-on switching losses
Turn-off switching losses
Total switching losses
VCC = 390V, IC = 3A
RG=10Ω, VGE=15V,
Tj=25°C
(see Figure 18)
20
68
88
µJ
µJ
µJ
Eon(1)
Eoff(2)
Ets
Turn-on switching losses
Turn-off switching losses
Total switching losses
VCC = 390V, IC = 3A
RG=10Ω, VGE= 15V,
Tj= 125°C
(see Figure 18)
37
93
130
µJ
µJ
µJ
Electrical characteristics STGD6NC60HD
6/15
Table 7. Collector-emitter diode
Symbol Parameter Test conditions Min. Typ. Max. Unit
VfForward on-voltage If = 1.5A
If = 1.5A, Tj = 125°C
1.6
1.3
2.1 V
V
trr
Qrr
Irrm
Reverse recovery time
Reverse recovery charge
Reverse recovery current
If = 3A,VR = 40V,
Tj = 25°C, di/dt = 100 A/µs
(see Figure 19)
21
14
1.36
ns
nC
A
trr
Qrr
Irrm
Reverse recovery time
Reverse recovery charge
Reverse recovery current
If = 3A,VR = 40V,
Tj =125°C, di/dt = 100A/µs
(see Figure 19)
34
32
1.88
ns
nC
A
STGD6NC60HD Electrical characteristics
7/15
2.1 Electrical characteristics (curves)
Figure 1. Output characteristics Figure 2. Transfer characteristics
Figure 3. Transconductance Figure 4. Collector-emitter on voltage vs
temperature
Figure 5. Gate charge vs gate-source voltage Figure 6. Capacitance variations
Electrical characteristics STGD6NC60HD
8/15
Figure 7. Normalized gate threshold voltage
vs temperature
Figure 8. Collector-emitter on voltage vs
collector current
Figure 9. Normalized breakdown voltage vs
temperature
Figure 10. Switching losses vs temperature
Figure 11. Switching losses vs gate resistance Figure 12. Switching losses vs collector
current
STGD6NC60HD Electrical characteristics
9/15
Figure 13. Thermal Impedance Figure 14. Turn-off SOA
Figure 15. Emitter-collector diode
characteristics
Test circuit STGD6NC60HD
10/15
3 Test circuit
Figure 16. Test circuit for inductive load
switching
Figure 17. Gate charge test circuit
Figure 18. Switching waveform Figure 19. Diode recovery time waveform
STGD6NC60HD Package mechanical data
11/15
4 Package mechanical data
In order to meet environmental requirements, ST offers these devices in ECOPACK®
packages. These packages have a Lead-free second level interconnect. The category of
second level interconnect is marked on the package and on the inner box label, in
compliance with JEDEC Standard JESD97. The maximum ratings related to soldering
conditions are also marked on the inner box label. ECOPACK is an ST trademark.
ECOPACK specifications are available at: www.st.com
Package mechanical data STGD6NC60HD
12/15
DIM. mm inch
MIN. TYP. MAX. MIN. TYP. MAX.
A 2.20 2.40 0.087 0.094
A1 0.90 1.10 0.035 0.043
A2 0.03 0.23 0.001 0.009
B 0.64 0.90 0.025 0.035
B2 5.20 5.40 0.204 0.213
C 0.45 0.60 0.018 0.024
C2 0.48 0.60 0.019 0.024
D 6.00 6.20 0.236 0.244
E 6.40 6.60 0.252 0.260
G 4.40 4.60 0.173 0.181
H 9.35 10.10 0.368 0.398
L2 0.8 0.031
L4 0.60 1.00 0.024 0.039
V2 0o8o0o0o
P032P_B
TO-252 (DPAK) MECHANICAL DATA
STGD6NC60HD Packaging mechanical data
13/15
5 Packaging mechanical data
TAPE AND REEL SHIPMENT
DPAK FOOTPRINT
DIM. mm inch
MIN. MAX. MIN. MAX.
A 330 12.992
B1.5 0.059
C 12.8 13.2 0.504 0.520
D20.2 0.795
G 16.4 18.4 0.645 0.724
N50 1.968
T 22.4 0.881
BASE QTY BULK QTY
2500 2500
REEL MECHANICAL DATA
DIM. mm inch
MIN. MAX. MIN. MAX.
A0 6.8 7 0.267 0.275
B0 10.4 10.6 0.409 0.417
B1 12.1 0.476
D1.5 1.6 0.059 0.063
D1 1.5 0.059
E1.65 1.85 0.065 0.073
F 7.4 7.6 0.291 0.299
K0 2.55 2.75 0.100 0.108
P0 3.9 4.1 0.153 0.161
P1 7.9 8.1 0.311 0.319
P2 1.9 2.1 0.075 0.082
R40 1.574
W 15.7 16.3 0.618 0.641
TAPE MECHANICAL DATA
All dimensions are in millimeters
Revision history STGD6NC60HD
14/15
6 Revision history
Table 8. Revision history
Date Revision Changes
04-Aug-2005 1 First release
07-Mar-2006 2 Complete version
07-Feb-2007 3 The document has been reformatted
STGD6NC60HD
15/15
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2007 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
