RECTRON
SEMICONDUCTOR
FEATURES
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-O rate flame retardant
* Lead: MIL-STD-202E method 208C guaranteed
* Mounting position: Any
* Weight: 0.008 gram
SOT-23
2SD596
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25OC ambient temperature unless otherwise specified.
0.118(3.00)
0.012(0.30)
0.020(0.50)
0.003(0.08)
0.006(0.15)
0.110(2.80)
0.019(2.00)
0.071(1.80)
0.100(2.55)
0.089(2.25)
0.020(0.50)
0.012(0.30)
0.043(1.10)
0.035(0.90)
0.004(0.10)
0.000(0.00)
TECHNICAL SPECIFICATION
SOT-23 BIPOLAR TRANSISTORS
TRANSISTOR(PNP)
2006-3
ELECTRICAL CHARACTERISTICS ( @ TA = 25oC unless otherwise noted )
Emitter cut-off current (VEB= 5V, IC=0)
DC current gain (VCE= 1V, IC= 100mA)
DC current gain (VCE= 1V, IC= 700mA)
Collector cut-off current (VCB= 30V, IE=0)
Collector-emitter saturation voltage (IC= 700mA, IB= 70mA)
Base-emitter voltage (VCE= 6V, IC= 10mA)
Transition frequency (VCE= 6V, IC= 10mA)
CHARACTERISTICS SYMBOL UNITS
-
-
-
-
-
-
-
-
-
-
-
-
0.1
-
-
-
400
mA
mA
V
V
V
V
V
MHz
Collector-base breakdown voltage (IC= 100mA, IE=0)
Collector-emitter breakdown voltage (IC= 1mA, IB=0)
Emitter-base breakdown voltage (IE= 100mA, IC=0)
CLASSIFICATION OF hFE
Pulse teat: Pulse width <350ms, Duty Cycle <2%.
RANK
Range
DV1
110-180 135-220
V(BR)CBO
V(BR)CEO
V(BR)EBO
IEBO
hFE(1)
hFE(2)
ICBO
VBE(on)
VCE(sat)
fT
TYP MAX
30
25
5
-
50
0.7
-140
-
0.6
110
MIN
DV5
DV2
200-320
DV4
170-270
DV3
250-400
0.055(1.40)
0.047(1.20)
-0.1
0.6
-
BASE
EMITTER
COLLECTOR
*
*
*
*
Power dissipation
PCM : 0.2 W (Tamb=25OC)
Collector current
ICM : 0.7 A
Collector-base voltage
V(BR)CBO : 30 V
Operating and storage junction temperature range
TJ,Tstg: -55OC to +150OC
1
1
2
3
2
3
*
*
*
*
*
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
RECTRON
Rectron Inc reserves the right to make changes without notice to any product
specification herein, to make corrections, modifications, enhancements or other
changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi-
lity for any errors or inaccuracies. Data sheet specifications and its information
contained are intended to provide a product description only. "Typical" paramet-
ers which may be included on RECTRON data sheets and/ or specifications ca-
n and do vary in different applications and actual performance may vary over ti-
me. Rectron Inc does not assume any liability arising out of the application or
use of any product or circuit.
Rectron products are not designed, intended or authorized for use in medical,
life-saving implant or other applications intended for life-sustaining or other rela-
ted applications where a failure or malfunction of component or circuitry may di-
rectly or indirectly cause injury or threaten a life without expressed written appr-
oval of Rectron Inc. Customers using or selling Rectron components for use in
such applications do so at their own risk and shall agree to fully indemnify Rect-
ron Inc and its subsidiaries harmless against all claims, damages and expendit-
ures.
DISCLAIMER NOTICE
