Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
ORDERING INFORMATION
TYPES
1. AQ-J Solid State Relays
Standard Packing; carton: 10 pcs., case: 200 pcs.
Note: * Random type also available. Please inquire.
Load current 10 to 40A
Small Tab Terminal SSR
AQ-J RELAYS
Type Load current Load voltage Input voltage Part No.
Zero-cross*
10A
75V to 264V AC
4 to 6V DC AQJ112V
10 to 18V DC AQJ119V
18 to 28V DC AQJ116V
15A
4 to 6V DC AQJ212V
10 to 18V DC AQJ219V
18 to 28V DC AQJ216V
25A
4 to 6V DC AQJ412V
10 to 18V DC AQJ419V
18 to 28V DC AQJ416V
UL (60950-1) reinforced
insulation compliant
FEATURES
1. Compact Size
W 28 × L 38 × H 30 mm
W 1.102 × L 1.496 × H 1.181 inch
2. Built-in varistor
3. Reverse input connection
prevention function
4. Labor Saving (tab terminal)
5. Heat sink combined types ready to
mount on DIN rail added (Radiating
grease and screws assembly process
not needed)
6. Output arrangement 1a and 1a × 2
available in the heat sink combined
type
Note: * International standards are acquired for
AQ-J SSR stand-alone, not applied to heat
sink combined type.
TYPICAL APPLICATIONS
1. Kitchen appliances
2. Vending machine
3. Injection molding machine
4. Packing machine
5. Amusement machine
Slim heat sink combined type
RoHS compliant
Output type
1: 10A, 75V to 264V AC
2: 15A, 75V to 264V AC
4: 25A, 75V to 264V AC
AQJ
Terminal, Type
1: Tab terminal, Zero-cross
2: Tab terminal, Random*
Input voltage
2: 4 to 6 V DC
6: 18 to 28 V DC
9: 10 to 18 V DC
Functions
V: Built-in varistor
Slim heat sink combined type
None:
Y:
W:
Without a heat sink
1a type
1a × 2 type
Note: * Random type is available by custom order.
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
2. AQ-J Slim Heat Sink Combined Type
Standard Packing; no carton, case: 10 pcs.
Note: * Random type also available. Please inquire.
3. Accessories
RATING
1. Ratings (Test sample: AQ-J stand-alone, Measurement condition: at 20°C 68°F, input ripple: 1% or less)
1) Input side
Note: Refer to REFERENCE DATA “3. Input current vs. input voltage characteristics”.
2) Output side
Notes: *1. Refer to REFERENCE DATA “1. Load current vs. ambient temperature”.
*2. When the load current is less than the rated minimum load current, please refer to “Cautions for Use”.
2. Ratings (Test sample: AQ-J slim heat sink combined type, Measurement condition: at 20°C 68°F, input ripple: 1 % or less)
1) Input side
Note: Refer to REFERENCE DATA “3. Input current vs. input voltage characteristics”.
Output configuration Type Load current Load voltage Input voltage Part No.
1a
Zero-cross*
10A
75V to 264V AC
4 to 6V DC AQJ112VY
10 to 18V DC AQJ119VY
18 to 28V DC AQJ116VY
20A
4 to 6V DC AQJ412VY
10 to 18V DC AQJ419VY
18 to 28V DC AQJ416VY
1a × 2
10A
(per 1a)
4 to 6V DC AQJ112VW
10 to 18V DC AQJ119VW
18 to 28V DC AQJ116VW
15A
(per 1a)
4 to 6V DC AQJ412VW
10 to 18V DC AQJ419VW
18 to 28V DC AQJ416VW
Type Part No. Packaged quantity
Slim heat sink (28mm wide) (Mountable on a DIN rail) AQP-HS-SJ10A No carton, 10 in a case
Slim heat sink (45mm wide) (Mountable on a DIN rail) AQP-HS-SJ20A No carton, 8 in a case
Standard heat sink (10A and 15A) AQP-HS-J10A 5 in a carton, 20 in a case
Standard heat sink (25A only) AQP-HS-J25A No carton, 5 in a case
DIN rail mounting plate AQP-DPJ No carton, 50 in a case
Part No.
Item
AQJ112V
AQJ212V
AQJ412V
AQJ119V
AQJ219V
AQJ419V
AQJ116V
AQJ216V
AQJ416V
Rated voltage 5V DC 12V DC 24V DC
Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC
Input impedance Approx. 0.26kΩApprox. 0.8kΩApprox. 1.6kΩ
Drop-out voltage Min. 1V DC
Part No.
Item
AQJ112V
AQJ119V
AQJ116V
AQJ212V
AQJ219V
AQJ216V
AQJ412V
AQJ419V
AQJ416V
Max. load current*110A 15A 25A
Load voltage 75 to 264V AC
Frequency 45Hz to 65Hz
Non-repetitive surge current 100A 150A 250A
“OFF-state” leakage current Max. 5mA
“ON-state” voltage drop Max. 1.6V
Min. load current*250mA
Part No.
Item
AQJ112V(Y·W)
AQJ412V(Y·W)
AQJ119V(Y·W)
AQJ419V(Y·W)
AQJ116V(Y·W)
AQJ416V(Y·W)
Rated voltage 5V DC 12V DC 24V DC
Input voltage 4 to 6V DC 10 to 18V DC 18 to 28V DC
Input impedance Approx. 0.26kΩApprox. 0.8kΩApprox. 1.6kΩ
Drop-out voltage Min. 1V DC
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
2) Output side
Notes: *1. Refer to REFERENCE DATA “3. Input current vs. input voltage characteristics”.
*2. Refer to REFERENCE DATA “1. Load current vs. ambient temperature”.
*3. When the load current is less than the rated minimum load current, please refer to “Cautions for Use”.
3. Characteristics (Measurement condition: at 20°C 68°F, input ripple: 1% or less)
REFERENCE DATA
(1) AQ-J Solid State Relays
1. Load current vs. ambient temperature Use load current within range specified in the figure below
Part No.
Item
AQJ112VY
AQJ119VY
AQJ116VY
AQJ412VY
AQJ419VY
AQJ416VY
AQJ112VW
AQJ119VW
AQJ116VW
AQJ412VW
AQJ419VW
AQJ416VW
Output arrangement 1a 1a × 2
Max. load current*110A 20A 10A 15A
Load voltage 75 to 264V AC
Frequency 45Hz to 65Hz
Non-repetitive surge current*2100A 250A 100A 250A
“OFF-state” leakage current Max. 5mA
“ON-state” voltage drop Max. 1.6V
Min. load current*350mA
Item Characteristics Remarks
Operate time Max. 1/2 cycle of voltage sine wave + 1ms
Release time Max. 1/2 cycle of voltage sine wave + 1ms
Insulation resistance Min. 100MΩ between input, output and case at 500 V DC
Breakdown voltage 3,000 Vrms between input and output for 1min.
2,500 Vrms between input, output and case
Vibration resistance SSR stand-alone: 10 to 55Hz, double amplitude of 1.5mm
Slim heat sink combined type: 10 to 55Hz, double amplitude of 0.75mm X, Y, Z axes
Shock resistance SSR stand-alone: Min. 980m/s2
Slim heat sink combined type: Min. 197m/s2X, Y, Z axes
Ambient temperature –30 to +80°C –22 to +176°FNon-condensing at low temperatures
Storage temperature –30 to +100°C –22 to +212°F
Operational method Zero-cross (Turn ON and Turn OFF)
Tested condition:
1) If attached to a heat sink, use a heat
conductive compound of similar coating to
improve cooling
2) Without external heat sink
If the mounting surface is not metallic and a
heat sink is not used, expose the bottom
surface and plate surface to improve heat
dissipation.
3) The current value is per 1a.
(1) 10 A type (when using heat sink or iron
plate)
(2)-1. 15 A type (when using iron plate)
(A) slim heat sink AQP-HS-SJ20A
(B) slim heat sink AQP-HS-SJ10A
(C) standard heat sink AQP-HS-J10A
(D) DIN rail mounting plate AQP-DPJ
(E) standard heat sink AQP-HS-J25A 100806040200
2
4
6
8
12
10
0
When a single unit is mounted on an (A) slim heat sink
When a single unit is mounted
on an (B) slim heat sink
When two units are mounted
on an (A) slim heat sink
When a single unit is mounted
on an (C) standard heat sink
When two units are mounted
on an (B) slim heat sink
When using 100×100×t1.6 mm iron plate
When using as stand-alone
When using an (D) DIN rail mounting plate
Ambient temperature, °C
Load current, A
6
12
9
3
18
15
00-20 20 40 60 80
Ambient temperature, °C
Load current, A
When using 200 × 200 × t2 mm iron plate
When using
100 × 100 × t1.6 mm
iron plate
When using
150 × 150 × t1.6 mm
iron plate
(2)-2. 15 A type (when using a heat sink) (3)-1. 25 A type (when using iron plate) (3)-2. 25 A type (when using a heat sink)
100806040200
5
10
15
20
0
When a single unit
is mounted on an
(A) slim heat sink
When a single unit is mounted
on an (C) standard heat sink
When a single unit is mounted
on an (B) slim heat sink
When two units are mounted
on an (B) slim heat sink
When two units are mounted
on an (A) slim heat sink
When using as stand-alone
When using an (D) DIN rail mounting plate
Ambient temperature, °C
Load current, A
0-20 20 40 60 80
5
10
15
20
25
30
0
Ambient temperature, °C
Load current, A
When using 300 × 300 × t2 mm iron plate
When using 150 × 150 × t1.6 mm
iron plate
When using 100 × 100 × t1.6 mm
iron plate
When using 250 × 250 × t2 mm
iron plate When using
200 × 200 × t2 mm
iron plate
100806040200
5
10
15
20
30
25
0
When two units
are mounted on an
(B) slim heat sink
When a single
unit is mounted on an
(B) slim heat sink
When two units are
mounted on an (A)
slim heat sink
When a single unit is mounted
on an (C) standard heat sink
When a single unit is
mounted on an (A)
slim heat sink
When using as stand-alone
When using an (D) DIN rail mounting plate
When a single unit is
mounted on an (E)
standard heat sink
Ambient temperature, °C
Load current, A
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
(2) AQ-J Slim Heat Sink Combined Type
2. Non-repetitive surge current vs.
carrying time
3. Input current vs. input voltage
characteristics
(10A, 15A and 25A common)
0
100
300
200
110100
No. of cycles at 60 Hz
Non-repetitive surge current, A
10A type
15A type
25A type
5
10
20
15
25
30
10 155020253530
Input voltage, V
Input current, mA
(4 to 6V DC) (10 to 18V DC)
(18 to 28V DC)
1. Load current vs. ambient
temperature characteristics
(1) Output arrangement: 1a (2) Output arrangement: 1a × 2
Note:
When two contacts are operated simultaneously.
In the case of a single-contact operation, the rating of
(1) AQJ11∗VY, AQJ41∗VY applies.
100806040200
5
10
15
25
20
0
AQJ41∗VY
AQJ11∗VY
Ambient temperature, °C
Load current, A
100806040200
5
10
15
20
0
AQJ41∗VW
(Per 1a)
AQJ11∗VW
Ambient temperature, °C
Load current, A
Use load current within range specified in the figure below
2. Surge current vs. carrying time
characteristics
3. Input current vs. input voltage
characteristics
0
100
500
300
400
200
110100
AQJ41∗V∗
AQJ11∗V∗
No. of cycles at 60 Hz
Surge current, A
6
0
18
12
24
30
10 1550203025
AQJ∗12V∗
AQJ∗19V∗
AQJ∗16V∗
Input voltage, V
Input current, mA
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
DIMENSIONS (mm inch)The CAD data of the products with a CAD Data mark can be downloaded from: http://industrial.panasonic.com/ac/e/
1. AQ-J Stand Alone External dimensions
4.3
1.6
7.95
4.55
2-1.2 dia.
Output side 1 and 2 terminals: #250 type, t = 0.8
Input side 3 and 4 terminals: #110 type, t = 0.5
.031
.020
2-1.65 dia.
4.3 dia.
30 max.
8.4
5.5
6.35
2.8
7.1
30
28
38
17 5
.169
.063
.313
.179
2-.047 dia.
2-.065 dia.
.169 dia.
1.181 max.
.331
.217
.250
.110
.280
1.181
1.102
1.496
.669.197
Schematic
Mounting dimensions
Load power
source
Input power
source 1
2
3
4
+
−
Load
2-4.3 dia. or M4
30+0.2
−0.1
1.181+.008
−.004
2-.169 dia. or M4
CAD Data
2.-(1) AQ-J Slim Heat Sink Combined Type
Output Arrangement: 1a External dimensions
AQP810
90
1.102
28
“A” part
4.6×5.6 elliptical hole
.181×.220
78
4.6 dia.
.181 dia.
100 3.543
3.071
3.937
70707
6
.236
.063
1.6
Max.
113
4.449
100
3.937
83
3.268
Note: When using on a DIN rail, please install
so that the “A” part is on top.
Schematic
Mounting dimensions (Top view)
Load power
source
Input power
source 1
2
3
4
+
−
Load
2-4.6 dia. or M4
2-.181 dia. or M4
90±0.2
3.543±.008
6
.236
CAD Data
2.-(2) AQ-J Slim Heat Sink Combined Type
Output Arrangement: 1a × 2 External dimensions
AQP810
70707
“A” part
Max.
113
4.449
100
3.937
83
3.268
90
78
100 3.543
3.071
3.937
6
.236
4.6×5.6 elliptical hole
.181×.220
4.6 dia.
.181 dia.
.063
1.6
1.102
28
Note: When using on a DIN rail, please install
so that the “A” part is on top.
Schematic
Note: Use caution for AQ-J terminal numbers.
Mounting dimensions (Top view)
Load power
source
Input power
source 1
2
3
4
+
−
Load
2-4.6 dia. or M4
2-.181 dia. or M4
90±0.2
3.543±.008
6
.236
CAD Data
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
ACCESSORIES (mm inch)
AQP-HS-SJ10A Slim Heat Sink
External dimensions
AQP810
4.6×5.6 elliptical hole
5-M4
(Effective screw depth: 6mm .236inch)
10
.394
3030
70707
“A” part
.181×.220
4.6 dia.
.181 dia.
6
.236
90
78
100 3.543
30 1.181
1.181 1.181
3.071
3.937
1.102
28
83
3.268
78
3.071
.063
1.6
Note: When using on a DIN rail, please install
so that the “A” part is on top.
Mounting dimensions (Top view)
2-4.6 dia. or M4
2-.181 dia. or M4
90±0.2
3.543±.008
6
.236
CAD Data
AQP-HS-SJ20A Slim Heat Sink
External dimensions
AQP812
70707
“A” part
4.6 dia.
.181 dia.
4.6×5.6 elliptical hole
.181×.220
30
1.181
30
1.181
5-M4
(Effective screw depth: 6mm .236inch)
83
3.268
45
1.772
78
3.071
.063
1.6
90
78
100 3.543
40 1.575
47.6 1.874
3.071
3.937
6
.236
Note: When using on a DIN rail, please install
so that the “A” part is on top.
Mounting dimensions (Top view)
2-4.6 dia. or M4
2-.181 dia. or M4
90±0.2
3.543±.008
6
.236
CAD Data
AQP-HS-J10A Standard Heat Sink
(for 10A and 15A types) External dimensions
R.087
3-M4
R2.2
100
3.937
47.6
1.874
30
1.181
90
3.543
50
1.969
4.4
.173 4.4
.173
54
2.126
45
1.772
28.5
1.122
24.5
.965
33.3
1.311 80
3.150 100+0.5
−1.5
+.020
−.059
3.937
2
.079
2
.079
1.5
.059
11.1
.437
1.5
.059
9
.354
Mounting dimensions
90±0.1
3.543±.004
50±0.2
1.969±.008
4-M4 or 4.4 dia.
4-M4 or .173 dia.
CAD Data
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
AQP-HS-J25A Standard Heat Sink
(for 25A type) External dimensions
3-M4
2
7
13
3
52
47.5
30
5
119
150
132
4-R2.5 .098
.079
.276
.512
.118
2.047
1.870
1.181
.197
4.685
5.906
5.197
82
64
46
3.228
2.520
1.811
120
100
142
4.724
3.937
5.591
Mounting dimensions
4-M4.5 or 5 dia.
132±0.1
119±0.1
4-M4.5 or .197 dia.
5.197±.004
4.685±.004
CAD Data
AQP-DPJ DIN Rail Mounting Plate
External dimensions
3-M4
15
.591
6
.236
16.5
.650
12.1
.476
.063
1.6 4.6 dia.
.181 dia.
4.6×5.6 elliptical hole
.181×.220
100
3.937
19
.748
30
1.181
90
3.543
47.6
1.874
CAD Data
AT8-DLA1 Mounting rail
15
5 5
10
1,000
5.5
35
1.5
27
24
15
40-5.5×15 slot
15 10 15
7.5
2.75R
.591
.197 .394
39.37
.217
1.378
.059
1.063
.945
.591 .591 .394 .591.108R .197
.295
40-.217×.591 slot
ATA4806 Fastening plate
12
50
M4
10
10
ATA4806
UP
.472
1.969
.394
.394
CAD Data CAD Data
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
AQ-J
ASCTB216E 201201-T1
NOTES
Recommended Temperature Controllers
For Cautions for Use.
1. Part number indication
The AQ-J slim heat sink combined type is
a product combining the AQ-J SSR and
AQ-J SSR heat sinks. The part numbers
are indicated on each AQ-J SSR and
heat sink.
Ex) In the case of AQJ112VY
Part number of AQ-J SSR: AQJ112V
Part number of the heat sink: AQP810*
When using these parts, please refer to
REFERENCE DATA, “1. Load current vs.
ambient temperature”.
Note: * The Japanese part number is printed on the
following accessories in stead of Global part
number. Please refer to the below chart for
interpretation from Japanese to Global part
number.
Products Japanese
Part No.
Global
Part No.
Compatible
models
Slim heat sink (28 mm) AQP810 AQP-HS-SJ10A AQ-J
Slim heat sink (45 mm) AQP812 AQP-HS-SJ20A AQ-A, AQ-J
Standard heat sink (10A and 15A) AQP811 AQP-HS-J10A AQ-A, AQ-J
Standard heat sink (25A and 40A) AQP808 AQP-HS-J25A AQ-A, AQ-J
Standard heat sink (AQ-A 25A) AQP804 AQP-HS-30/40A AQ-A
DIN Rail Mounting Plate (for AQ-A and AQ-J) AQP809 AQP-DPJ AQ-A, AQ-J
Mounting Rail ATA48011 AT8-DLA1 AQ-A, AQ-J
Te r minal Cover (for AQ-A) AQA801 AQA801 AQ-A
48mm
56mm
1.890inch
2.205inch
48mm
1.890inch
<KT4H Temperature Controller>
Our temperature controller is recommended for use with our Solid State Relays.
Features
• Space saving requiring only a depth of 65 mm
• Data collection possible through a PLC using RS485 communication
• Tool port is standard for easy data setting
• Inverted LCD + backlight for good legibility with large characters
• Excellent operability and rich optional control functions
Substitute part numbers
*For detailed product information about temperature controllers, please refer to our website:
http://industrial.panasonic.com/ac/e/
Power supply Control output Part No.
100 to 240 V AC Non-contact voltage output AKT4H112100
